Textile Structure
how cloth is put together
Concept

Wrinkle — where it appears

A periodic excursion out of the plane, whose spacing is settled between the bending stiffness that resists short waves and the tension that resists long ones. The spacing goes as the fourth root of the rigidity over the tension, which is the one exponent this site checks against a closed form.

Named by 4 essays across 2 fields — each of them below, with the objects they name alongside it.

A cloth laid over a sphere. Every thread segment is exactly one pitch and none has stretched. What has changed is the angle at each crossing, and the amount is decided by the surface — a developable one costs nothing and a curved one costs more the further the cloth goes.

Shear locking in a composite preform

Laying a woven reinforcement over a mould is the bias mechanism doing useful work, and it stops dead at the angle where the threads jam. Where the cloth wrinkles is a geometric prediction with a radius attached.

mechanics · Bias Wrinkles 127 mm apart. A 300 mm width of a 120 g/m² cloth whose bending length is 20 mm, held under 5 newtons per metre across it and compressed. It cannot carry the compression in the plane, so it leaves the plane, at a wavelength the bending rigidity and the tension settle between them: 127 mm, which is 2.4 wrinkles across the width. The amplitude is drawn and is not computed — this arithmetic sets the spacing and says nothing about the depth.

A cloth cannot carry a push

The net model that runs this site's mechanics has no bending stiffness at all, so it buckles under any compression whatever, into wrinkles of any wavelength whatever. What picks the wavelength is the competition the net leaves out — and the answer is a quarter power, which is why a wrinkle is so hard to change.

mechanics · Buckling The number the drape test does not record. A 150 mm specimen over a 90 mm pedestal, for fabrics from limp to stiff. The curve is the fold count the buckling argument predicts — three quarters of a power of the specimen's radius over its own bending length — and it runs from 2 folds to 11. The number beside each mark is the drape coefficient the same specimen would report, which moves by a few points across the whole range.

The nodes a drape test throws away

A drape test lays a circular specimen over a pedestal, photographs the shadow and reports one number. The specimen also falls into a definite number of folds, which is a buckling mode set by the fabric's own bending length — and the standard method observes it, does not record it, and reports the number it is least sensitive to.

mechanics · Buckling A cotton yarn at a fold, at both ends of its bending bracket. The same 20 tex cotton yarn bent to a radius of 0.084 mm under the two assumptions this site's bending bracket is drawn between. If the fibres slide freely past one another each bends about its own middle and the surface strain is 7.14%; if they are locked the bundle bends as a rod and the outermost fibre is strained 100%. The ratio is 14.0, which is the ratio of the two diameters and therefore the square root of the fibre count over the packing — so the bracket of 327 this site carries in a stiffness is a bracket of 14.0 in a strain. What the drawing cannot show is which of the two a real yarn does, and the answer is settled by a refusal: at the tightest fold a cloth can make, the locked bound asks for a strain of one, and a creased cloth does not fall apart.

A wrinkle cannot settle what a crease settles

The first rung of this ladder found that a pressed crease decides a question this collection had been unable to settle for two fields — whether a bent yarn's fibres slide or bend as one body — and it decides it by refusing: the coherent branch would strain the fibres by eighty-four per cent and cotton breaks at six. A wrinkle is the same fold at twenty times the radius, and there both branches are survivable. So the bracket that a crease collapses stays fourteen times wide at every radius anybody actually creases a cloth at accidentally.

finishing · Crease

Named alongside it

The objects these essays reach for when they reach for this one.

DrapeBending lengthBucklingCantileverFlexural rigidityBending bracketBreaking extensionCreaseDrape coefficientElastic recoveryFibre finenessFold radius

All concepts