Textile Structure
how cloth is put together
Concept

Bending bracket — where it appears

The interval a yarn's bending rigidity must lie in, between the fibres sliding freely past one another and being locked together. It is several hundred wide as a stiffness and about fourteen as a strain, because a rigidity goes as the fourth power of a diameter and a strain as the first.

Named by 7 essays across 2 fields — each of them below, with the objects they name alongside it.

The tightest fold a 20 tex cotton yarn can be given. A cloth folded as sharply as it can be folded. The two yarn crowns on the inside of the fold cannot pass through one another, so the fold's radius is the yarn's own — 0.084 mm for a 20 tex cotton yarn — and there is no measurement of an iron anywhere in the argument. At that radius a fibre free to slide is strained 7.14%, which is √(packing × fibre tex ÷ yarn tex), and the whole yarn bending as a rod would be strained exactly one hundred per cent. Cotton's measured breaking extension is 6.0% to 10.0%, so the free bound does not survive and the locked one cannot. What the drawing cannot show is the fibres inside the yarn, which is exactly what the argument is about — the picture is the same either way and the strain is fourteen times different.

A crease is a fold the crimp cannot supply

A fold needs its outer face longer than its inner, and a woven cloth's way of supplying a length is to move crimp. That runs out at a radius of millimetres, and a pressed crease is tenths of one — so the fold is handed to the fibres. How hard it strains them turns on a question this collection has been unable to settle for two fields, and a crease settles it by refusing.

finishing · Crease The strain at a fold against the strain each fibre breaks at. For each fibre, the surface strain at the sharpest fold a 20 tex yarn of it can make — which is √(packing × fibre tex ÷ yarn tex), with no measurement of a crease in it — beside its own measured breaking extension. cotton and flax are strained past the low end of their breaking range, so some of their fibres break at the fold, and that is what a linen crease is. The rest survive, and among them viscose and wool return less than three fifths of what they were given, which is the other way a cloth creases. Both columns are needed: viscose survives with a factor of two to spare and is among the three worst by measurement. What the bars cannot show is wool, which the census puts in the wrong column because the recovery figures are the immediate ones and wool's is the most delayed of any fibre here.

Which fibres crease, and why there are two answers

Run the sharpest fold a yarn can make against every fibre's breaking extension and its recovery, and the ranking that falls out is the trade's own — linen worst, cotton next, wool and the melt-spun filaments best. It falls out of two columns rather than one, because two fibres in the bottom three get there by different mechanisms, and a treatment that fixes one does nothing for the other.

finishing · Crease How hard a relaxed fabric presses on itself. The normal force at one crossing of a relaxed cloth, against the force at one interlacing of a relaxed jersey. The woven figures were recovered by inverting a thickness measurement through a compression energy; the knitted one comes from a solved shape and no measurement at all, so the two are genuinely independent rather than two readings of one number. Every cloth in the table presses harder than the knit — by between 5 and 22 times — and the knitted figure is an upper bound besides. One ratio is behind a list of differences usually explained separately: which fabric gives up a fibre end, which pills, which frays, which lets a seam slip.

What a loop presses with

A knitted loop hangs on the loop below it and presses on it with a force nobody has been able to state. Solved from the loop's own bending it comes to about forty millinewtons a stitch — an order of magnitude under a woven crossing's, by two independent routes that have nothing in common.

mechanics · Elastica What a knit gives when it is pulled. Force against course-wise extension for a 20 tex cotton jersey at a 3.5 mm loop, computed from the loop's own bending with the relaxed shape as the yarn's natural one. The loop length is the same at every point on the curve: nothing here is the yarn stretching. It reaches 92% extension at 2.96 N per metre and then stiffens by a factor of 85 over the rest of the range, as the straight line between two interlacings runs up against the yarn between them. This is the number the collection's second phase recorded as a lower bound it could not compute, and it is still a lower bound in one respect: friction at the contacts is not in it, so a real fabric is stiffer than this and does not come back along the same curve.

The modulus a knit has instead of one

A fabric's stiffness in extension is usually its yarn's modulus with the geometry taken out. A knit's is not: dimensionally it can only be a bending rigidity over a length cubed, and the same yarn laid straight and parallel is thirty thousand times stiffer than the fabric made of it.

mechanics · Knit How hard a fabric is to bend, per unit width. Bending rigidity in micronewton metres per unit width, computed the same way for eight woven cloths and for a jersey in each of its two directions: the yarn's own rigidity, times the length of yarn per unit area, times the fourth power of the cosine of the angle each element makes with the bending direction. The knit lands inside the band of the woven cloths rather than below it, which is worth knowing because a knit is usually called the softer fabric. It is not softer to bend; it is softer to stretch, by three decades. What it does have is direction: 2.17 to one between its two axes, where a balanced plain weave is near one, and the soft axis is the one a jersey rolls about at its top and bottom edges.

A knit bends more easily along its courses

A jersey is not a soft fabric to bend. Computed the same way as this collection's woven cloths it lands inside their band, at the limp end — and the useful number is not the magnitude but the direction: two point two to one between its two axes, with the soft one being the axis it rolls about.

mechanics · Knit What leaving the plane costs, which is less than nothing. Bending energy a stitch against how far the yarn climbs between one interlacing and the next, for a 20 tex cotton jersey at a 3.5 mm loop. The curve falls. A climb is not an extra bend added to a curve that was otherwise unchanged; it is part of the straight line the thread has to span, so a longer climb leaves less slack to be spent on curvature. At a jersey's own climb of one diameter the energy is 24395 nJ against 25060 for the planar model — 2.7% lower, where an earlier estimate on this site put the ride at three per cent of the loop's bending and had the sign the other way round. At a rib's climb of three or four diameters the fall is 33%.

What leaving the plane costs

Every number the flat loop model produced, beside the same number with the climb in it. Four of the five fall, none moves by four per cent, and the estimate that priced the third dimension beforehand had the sign the wrong way round for a reason worth naming.

mechanics · Elastica A cotton yarn at a fold, at both ends of its bending bracket. The same 20 tex cotton yarn bent to a radius of 0.084 mm under the two assumptions this site's bending bracket is drawn between. If the fibres slide freely past one another each bends about its own middle and the surface strain is 7.14%; if they are locked the bundle bends as a rod and the outermost fibre is strained 100%. The ratio is 14.0, which is the ratio of the two diameters and therefore the square root of the fibre count over the packing — so the bracket of 327 this site carries in a stiffness is a bracket of 14.0 in a strain. What the drawing cannot show is which of the two a real yarn does, and the answer is settled by a refusal: at the tightest fold a cloth can make, the locked bound asks for a strain of one, and a creased cloth does not fall apart.

A wrinkle cannot settle what a crease settles

The first rung of this ladder found that a pressed crease decides a question this collection had been unable to settle for two fields — whether a bent yarn's fibres slide or bend as one body — and it decides it by refusing: the coherent branch would strain the fibres by eighty-four per cent and cotton breaks at six. A wrinkle is the same fold at twenty times the radius, and there both branches are survivable. So the bracket that a crease collapses stays fourteen times wide at every radius anybody actually creases a cloth at accidentally.

finishing · Crease

Named alongside it

The objects these essays reach for when they reach for this one.

Bending rigidityElasticaLoop lengthBreaking extensionElastic recoveryFibre finenessFold radiusAnisotropyContact forcePacking factorSpecificationTightness factor

All concepts