Textile Structure
how cloth is put together
Concept

Tightness factor — where it appears

The square root of a yarn's count over its loop length, which the knitting trade quotes as an index of how tightly a fabric is made. It is the fraction of a stitch's own footprint the thread fills, times a constant made of the fibre density and the packing.

Named by 26 essays across 5 fields — each of them below, with the objects they name alongside it.

How far a tube can be tapered by its loop. The same 10 wales by 10 courses of plain knit at the two ends of the usable loop range for a 20 tex yarn — 3.44 mm at the loose end and 2.80 mm at the tight one — drawn at a common scale in centimetres. On 240 needles the circumference falls from 192.0 cm to 156.0 cm, a taper of 18.8 per cent, and the fabric becomes 1.51 times as dense.

A tube can only be shaped by its loop

On a circular machine the needle count is the cylinder, so a seamless tube's circumference is its wale count times its wale spacing — and the wale spacing is the loop length over one constant. The loop is the only free quantity, the yarn bounds it at both ends, and what is left is a taper of 18.8 per cent bought at the price of a fabric half again as dense.

knits · Shaping A loop's cell, dry and wetted. One stitch of a 20 tex cotton jersey at a 3.50 mm loop, drawn inside the rectangle of one wale by one course that its own dimensions give. The thread is drawn at its own width, and it already fills 1.129 of the cell dry — more than the whole of it, which is what an opaque jersey looks like from above. Wetting takes it to 1.355. So the reason a knit does not build a swelling pressure is not that it has room; it is that its dimensions are a loop length times a constant with no yarn diameter in them, so there is no closure condition to fail. What the drawing cannot show is the third dimension: the legs lie over one another rather than overlapping in the plane, which is exactly why an occupancy above one is possible.

A loop has no closure condition

A woven cloth can run out of room: its two systems must supply its whole thickness between them, and past a certain swelling they cannot. A knit has no such equation, so no critical swelling and no pressure. The obvious explanation — that a knit is open and has somewhere to put the swelling — is false, and the arithmetic refuses it.

knits · Knit A plain knit's two relaxation steps. Munden's three relaxation states are usually given as three sets of constants. Read as a path they are two steps, and the two compose to the whole exactly — which is a real check, because the three sets were measured independently. The first step is the larger in the course direction and the smaller across the wales, and the second is 0.64 of the first lengthwise. That is the shape of a laundering series and it is the same mechanism: a fully relaxed state is reached by tumbling rather than by waiting, so what the standard specifies is a quantity of agitation and not a duration. What the bars cannot show is the loop length, which cancels out of all four numbers because every dimension of a knit is a loop length times a dimensionless constant.

A knit relaxes for as long as it is allowed to

Munden's three states are usually given as three sets of constants. Read as a path they are two steps, they compose exactly, and the second is not a smaller version of the first — the fabric shrinks twice as much along its courses as across its wales on the first step and rather less than half as much on the second.

knits · Knit When a knit has a hole between its loops, and when it has none. A loop's occupancy is its length times its diameter over the cell it sits in, and Munden's constants make that cell ℓ²/(k_c·k_w). The loop length cancels once and what is left is d·k_s/ℓ, where k_s is Munden's own stitch-density constant — so whether a knit has a hole between its loops depends on d/ℓ and on nothing else: no gauge, no count, no fabric dimension. The three curves are the three relaxed states of 20 tex cotton. Each crosses one at a loop length of 3.34, 3.63, 3.95 mm respectively, and a jersey is knitted at 2.63 to 3.44 mm — the shaded band. Every commercial jersey is therefore on the wrong side of the threshold in at least two of its three states: it closes its own holes as it relaxes, and its air goes through its threads rather than between them.

A knit has no hole to lose

Every argument in this ladder is planar: threads at a spacing, a rectangle between four of them, a channel down it. Applied to a jersey it returns nothing at all, and the nothing is the finding. A loop's occupancy is its diameter times Munden's own stitch-density constant over its loop length, with no gauge and no fabric dimension in it — and the whole commercial range of tightness is on the wrong side of the threshold.

knits · Knit geometry Whether a cloth's hairs can reach one another. n_A λ² for each construction in this site's table — the hairs per square millimetre times the square of their own length, which is the pure number that asks whether a hair can touch its neighbour. It is a count times an area, so it has to be a pure number. Every one of them is under one, which means no ordinary woven cotton cloth has a hair layer at all: it has isolated whiskers on a bare surface. The dashed line is the threshold. The spread across the whole table is only 1.9-fold, because the density goes as the sett times the root of the count and those move in opposite directions as a cloth is made finer — so construction is almost powerless here, and everything that crosses this threshold does so by finishing rather than by weaving.

A knit gives up its fibres more easily

Knitwear pills and shirting does not, and the fibres are often the same fibres. The difference is a count of yarn per unit area and a pressure between threads, and both of them push a knit over a threshold that a woven cloth of the same yarn cannot reach.

knits · Knit A knitted loop, solved rather than drawn. 3 courses by 3 wales of a 20 tex cotton jersey at a 3.5 mm loop, tightness factor 12.8, with one stitch picked out. The centre line is the curve that minimises the yarn's own bending between one interlacing and the next, and the yarn is drawn at its own width of 167 µm so that the crowding is the fabric's rather than the drawing's. It is rounder than the horseshoe a knitting diagram draws, and deliberately so: a diagram draws the topology and an elastica draws the mechanics, and a rod with a fixed length between two fixed points does not hug a rectangle. Half the yarn between two interlacings is spare — the straight line between them is 51% of the yarn available — which is what lets a loop be solved as a free elastica at all. The tightest bend anywhere on it is 1.00 times one over the yarn diameter, the curvature of a yarn wrapped hard round another of the same size. Nothing arranged that: the only things imposed are the loop length and the two spacings.

A loop is nine tenths free run

Half the yarn in a knitted stitch is slack — the straight line between two interlacings is a little over half the thread available to span it. That is two orders of magnitude more room than a woven thread has, and it is why a knitted loop is a shape that can be solved rather than a shape that has to be constructed.

knits · Elastica Everything a plain knit can be, at one loop length. Bending energy over the two spacings a plain knit has to choose, for a 20 tex cotton yarn at a 3.5 mm loop, as a multiple of the energy the fully relaxed fabric holds. Darker is more. The solid edge is where the straight line between two interlacings reaches the yarn between them — the geometry's own limit, with nothing elastic in it — and there is no state beyond it at any force. Munden's three relaxation states are marked, and the thing to see is that they are not in a hollow: they lie along a slope, in order, with the most completely relaxed of them the highest. An unset yarn would slide down and to the right until it met the edge. Real fabrics sit where they were left.

How far a knit could go if its yarn were the limit

The yarn in a stitch allows three hundred and twenty per cent course-wise extension before the straight line between two interlacings reaches the thread spanning it. A jersey jams at about a hundred. The factor of three is the finding: what stops a knit stretching is not the loop running out of yarn.

knits · Knit A loop is bent about as hard as its yarn allows. The tightest curvature anywhere on a relaxed loop, against the knitter's own tightness factor, in units of one over the yarn diameter — which is the curvature of a yarn wrapped hard round another of the same size, and the tightest bend any fabric asks for. Across the whole range a knitter can reach it stays between 0.73 and 1.27, crossing one at a tightness factor of about thirteen — which is where the trade's own usable band begins. Nothing arranged that. The only things imposed are the loop length, the yarn diameter and the two measured spacings, and the curvature is whatever the minimisation returns.

Two knits with one tightness factor are one knit

The loop model has exactly one dimensionless group in it — the yarn's diameter over the loop length — so two fabrics that share it have the same loop, to fifteen figures, whatever they are made of. That group is the knitter's own tightness factor, and it explains why an index quoted as empirical works as well as it does.

finishing · Knit geometry What holds a thread in, as two factors. The two quantities whose product is the grip on a buried thread, for a woven poplin and a jersey of the same yarn. Each contact in the knit is lighter by 8.0 times, and the contacts are further apart by 5.6 — one per half loop length against one per thread spacing. They multiply rather than competing, so the grip per millimetre of buried thread is 31 times weaker in the knit, and the crossover length at which a thread breaks rather than slides moves with it: 11.6 mm in the cloth and 461 in the knit. The two factors are drawn separately because their product is two orders of magnitude and a bar chart of it would put the knit's bar below the width of a line.

The knitted pilling criterion gets its number

Knitwear pills and shirting does not, and the standing explanation here has been that a knit presents more exposed yarn under less pressure between its threads. The second half had no number. It has one now, and it is bigger than the argument needed: the grip on a buried fibre is thirty times weaker in a knit than in a woven cloth of the same yarn.

applied · Pilling The force at an interlacing, which no longer lies in the fabric. A crossing of a relaxed jersey in section on the left, with the thickness expanded 3×, and on the right the contact force drawn at the angle the solve gives it — which is a true angle, unlike anything in the section beside it. The head of one course and the feet of the next lie one yarn diameter apart through the fabric, 0.167 mm, so the interlacing is not a point in a plane and the force at it is not in one either. It comes out at 38.30 mN a stitch, turned 11.75° out of the fabric: 37.50 mN along the wales, which is what friction has to hold, and 7.81 mN through the thickness, which is what holds the two faces apart. Divided by the area a stitch occupies the second is 15.1 kPa, or 113 mmHg — a pressure, and the quantity a compression measurement reports.

How thick a knit is

Two centre lines pass at a diameter and each has a radius on either side, so a plain jersey is two yarn diameters thick with nothing fitted. It does not depend on the gauge, it lands inside the band of this collection's woven cloths, and it is lower than any gauge will read.

knits · Knit A knitted loop is a plane curve in a plane that is not the fabric's. A relaxed 20 tex jersey at a 3.5 mm loop, seen from the end of a course. Each course is a straight line because it is one: a half period leaves and arrives along the course direction, so the plane it bends in contains that direction, and a plane curve seen along a line in its own plane projects to a segment. The upper panel expands the thickness 3× so the arrangement can be seen and no angle may be measured off it; the lower panel is the same fabric at one scale, where the tilt is what it really is. The angle is 11.75°: a climb of one yarn diameter, 0.167 mm, against a drop of a course spacing and a diameter, 0.803 mm. Successive courses overlap by exactly one diameter, which is the interlacing, and the fabric is therefore 0.334 mm thick — two yarn diameters, with nothing fitted.

A state is a thickness too

This collection's rule is that a fabric dimension quoted without its relaxation state is not a measurement. A knitted fabric has three dimensions and only two of them obey the rule: its thickness is the same in every state, because the interlacing that sets it does not relax.

finishing · State What a run has to overcome. The friction holding one loop in the loop below it, against how tightly the fabric is knitted. It is the coefficient of friction times the contact force times the two interlacings a stitch makes, and it runs from 14.7 to 35.1 millinewtons across the knittable range — a factor of 2.4 for a factor of under two in tightness factor, because the contact force and the tightness move together. That is the arithmetic behind a rule every knitter has: a slack fabric runs and a tight one does not, and tightening it is the only lever that works. The figures are upper bounds, since a set yarn presses less.

A run is a race between two energies

A dropped stitch travels when a loop can be pulled out of the loop below it, and there are two candidate drivers: the energy the loop releases by unravelling, and the load the garment is under. One of them turns out to be negligible, and knowing which changes what a knitter can do about it.

applied · Damage What the third dimension changes, and by how much. Every number the planar loop model produced, beside the same number with the climb in it, for a 20 tex cotton jersey at a 3.5 mm loop. Four of the five fall and none moves by as much as four per cent, which is the useful part of the answer: the planar model was not wrong about a jersey, it was a projection of the right curve. What it could not have at all is the quantity that is not on this list — the force through the fabric's thickness, 7.81 mN a stitch, which a model with no thickness has nowhere to put.

The constants say nothing about thickness

Munden's two constants give a knitted fabric's wale and course spacings from its loop length alone, and the tightness factor collapses every fabric's shape onto one curve. Neither reaches the third dimension: two knits that are one knit in plan are two different thicknesses.

finishing · Knit geometry How hard a relaxed fabric presses on itself. The normal force at one crossing of a relaxed cloth, against the force at one interlacing of a relaxed jersey. The woven figures were recovered by inverting a thickness measurement through a compression energy; the knitted one comes from a solved shape and no measurement at all, so the two are genuinely independent rather than two readings of one number. Every cloth in the table presses harder than the knit — by between 5 and 22 times — and the knitted figure is an upper bound besides. One ratio is behind a list of differences usually explained separately: which fabric gives up a fibre end, which pills, which frays, which lets a seam slip.

What a loop presses with

A knitted loop hangs on the loop below it and presses on it with a force nobody has been able to state. Solved from the loop's own bending it comes to about forty millinewtons a stitch — an order of magnitude under a woven crossing's, by two independent routes that have nothing in common.

mechanics · Elastica A knit's warmth is its thickness, and a rib's thickness is a machine setting. Thermal resistance in tog for a 20 tex cotton at a 3.5 mm loop, for a plain jersey and for a one-by-one rib at four bed gaps. The bar is the lower bound and the mark beyond it is the upper — Wiener's two bounds on a mixture of fibre and air at the fabric's own fibre fraction, which is 26.6% for the jersey and falls to 8.9% for the widest rib. The jersey holds 0.088 tog and the rib at five diameters 0.334 — a factor of 3.8, bought entirely by opening the beds. Every one of these is a small fraction of the still-air layer that clings to a garment's outside, which is worth about 1.2 tog on its own.

How dense a knitted fabric is

A fabric's areal weight is what the trade specifies and it says nothing about bulk. Divide it by a thickness and the answer is a density — 0.40 grams a cubic centimetre for a jersey, a quarter of the fibre it is made of — and that quarter, the share of the volume that is not air, is the number every other property follows.

setting · Weight A knit's warmth is its thickness, and a rib's thickness is a machine setting. Thermal resistance in tog for a 20 tex cotton at a 3.5 mm loop, for a plain jersey and for a one-by-one rib at four bed gaps. The bar is the lower bound and the mark beyond it is the upper — Wiener's two bounds on a mixture of fibre and air at the fabric's own fibre fraction, which is 26.6% for the jersey and falls to 8.9% for the widest rib. The jersey holds 0.088 tog and the rib at five diameters 0.334 — a factor of 3.8, bought entirely by opening the beds. Every one of these is a small fraction of the still-air layer that clings to a garment's outside, which is worth about 1.2 tog on its own.

A knit is warm because of where its yarn is not

Warmth is a thickness of still air, and until a knitted fabric had a thickness there was nothing to compute. It has one now, and the answer is that a rib's warmth is a machine setting: opening the beds from two diameters to five nearly trebles the fabric's resistance without changing a gram of yarn.

applied · Insulation The section the fabric asks for, beside the one the model drew. A 20 tex cotton yarn in cross-section, at 900 times life size. The circle is what every solve in this collection has assumed: a diameter of 0.167 mm from the count and the packing factor. The ellipse has the same area and a minor axis of 78% of it, which is the closest the fabric's own adjacent courses come to one another — 0.130 mm. Nothing about that number was fitted to a fabric. It falls out of a solve that knew nothing about flattening, and it lands inside the range the trade reports for yarn in cloth, which this collection has carried as a free parameter ever since it first put a number on a sett.

The flattening nobody fitted

A yarn in cloth is not round, everybody knows it, and nothing has ever predicted how flat. This collection's own knitted geometry turns out to require a flattening of four fifths — from a solve that knew nothing about flattening, made no allowance for it, and would have been written the same way if the idea had never occurred to anybody.

knits · Contact The flattening a knitted fabric asks for, against its own tightness. Every point is a solved fabric — 18 of them, over five loop lengths, three relaxation states and three counts — and the vertical axis is the closest its adjacent courses come, in diameters. The values run from 0.707 to 0.839 and they fall on one curve against the tightness factor, which is the model's only dimensionless group. That is what makes this a structural requirement rather than an arithmetical accident of one example: a tighter fabric demands a flatter yarn, by an amount its own tightness decides, and nothing about the fibre or the count enters except through that group.

A wet knit's yarn is flatter

A knitted fabric's own geometry demands a flattened yarn, and how flat depends on how much room the fabric leaves. A wet cotton yarn is a tenth thicker than a dry one at the same length, so a wet fabric leaves less room — and asks its yarn to be flatter by an amount the geometry gives.

finishing · State The flattening a knitted fabric asks for, against its own tightness. Every point is a solved fabric — 18 of them, over five loop lengths, three relaxation states and three counts — and the vertical axis is the closest its adjacent courses come, in diameters. The values run from 0.707 to 0.839 and they fall on one curve against the tightness factor, which is the model's only dimensionless group. That is what makes this a structural requirement rather than an arithmetical accident of one example: a tighter fabric demands a flatter yarn, by an amount its own tightness decides, and nothing about the fibre or the count enters except through that group.

A flattening that follows the tightness factor

Eighteen solved fabrics — five loop lengths, three relaxation states, three counts — and the flattening each one's geometry demands falls on a single curve against one dimensionless group. Nothing about the fibre or the count survives except through that group, which is what turns an arithmetical result into a structural requirement.

knits · Contact Two courses at the yarn's own width, and the place they overlap. The solved course of a 24.2 tex cotton jersey at a 3.5 mm loop, drawn in plan with the course below it, each strand at the yarn's own diameter of 0.184 mm. Where the two overlap, the fabric is occupying the same space twice. The interlacing is where the model placed them one diameter apart. The closest they come is 0.140 mm — 0.761 of a diameter — and it is not at the interlacing. A round yarn cannot occupy this arrangement; a yarn flattened to 76% of its round diameter can, and flattened is what a yarn in a fabric measurably is.

What wetting does to the bending limit

A rod cannot be bent to a radius below its own. A relaxed knitted loop sits at twice that limit, and a wet yarn is a tenth thicker in the same loop — so wetting moves a fabric a tenth of the way towards a bend it cannot physically take.

finishing · State A knitted loop is a plane curve in a plane that is not the fabric's. A relaxed 20 tex jersey at a 3.5 mm loop, seen from the end of a course. Each course is a straight line because it is one: a half period leaves and arrives along the course direction, so the plane it bends in contains that direction, and a plane curve seen along a line in its own plane projects to a segment. The upper panel expands the thickness 3× so the arrangement can be seen and no angle may be measured off it; the lower panel is the same fabric at one scale, where the tilt is what it really is. The angle is 11.75°: a climb of one yarn diameter, 0.167 mm, against a drop of a course spacing and a diameter, 0.803 mm. Successive courses overlap by exactly one diameter, which is the interlacing, and the fabric is therefore 0.334 mm thick — two yarn diameters, with nothing fitted.

A loop is a plane curve in another plane

A knitted loop was solved as a flat curve because two curves in one plane cannot pass through one another and a loop must. Letting it out of the plane turns out to change nothing about its shape: the loop is still planar, and its plane is the fabric's turned through twelve degrees.

mechanics · Elastica Two courses at the yarn's own width, and the place they overlap. The solved course of a 20 tex cotton jersey at a 3.5 mm loop, drawn in plan with the course below it, each strand at the yarn's own diameter of 0.167 mm. Where the two overlap, the fabric is occupying the same space twice. The interlacing is where the model placed them one diameter apart. The closest they come is 0.130 mm — 0.780 of a diameter — and it is not at the interlacing. A round yarn cannot occupy this arrangement; a yarn flattened to 78% of its round diameter can, and flattened is what a yarn in a fabric measurably is.

A loop bends at twice its own radius

A rod of radius r cannot be bent to a centre-line radius below r without occupying its own space. A knitted loop's tightest bend is at 2.04 yarn radii — twice the hard limit, and falling as the fabric tightens. That is a ceiling on how tight a knit can be, from contact alone.

knits · Contact What leaving the plane costs, which is less than nothing. Bending energy a stitch against how far the yarn climbs between one interlacing and the next, for a 20 tex cotton jersey at a 3.5 mm loop. The curve falls. A climb is not an extra bend added to a curve that was otherwise unchanged; it is part of the straight line the thread has to span, so a longer climb leaves less slack to be spent on curvature. At a jersey's own climb of one diameter the energy is 24395 nJ against 25060 for the planar model — 2.7% lower, where an earlier estimate on this site put the ride at three per cent of the loop's bending and had the sign the other way round. At a rib's climb of three or four diameters the fall is 33%.

What leaving the plane costs

Every number the flat loop model produced, beside the same number with the climb in it. Four of the five fall, none moves by four per cent, and the estimate that priced the third dimension beforehand had the sign the wrong way round for a reason worth naming.

mechanics · Elastica The force at an interlacing, which no longer lies in the fabric. A crossing of a relaxed jersey in section on the left, with the thickness expanded 3×, and on the right the contact force drawn at the angle the solve gives it — which is a true angle, unlike anything in the section beside it. The head of one course and the feet of the next lie one yarn diameter apart through the fabric, 0.167 mm, so the interlacing is not a point in a plane and the force at it is not in one either. It comes out at 38.30 mN a stitch, turned 11.75° out of the fabric: 37.50 mN along the wales, which is what friction has to hold, and 7.81 mN through the thickness, which is what holds the two faces apart. Divided by the area a stitch occupies the second is 15.1 kPa, or 113 mmHg — a pressure, and the quantity a compression measurement reports.

The force that holds a knit open

Resolving a knitted loop's contact force out of the fabric's plane leaves a fifth of it pointing through the thickness. That fifth is 7.8 millinewtons a stitch, fifteen kilopascals over the area a stitch occupies, and it is the whole reason a jersey has a thickness rather than a plan.

mechanics · Elastica What leaving the plane costs, which is less than nothing. Bending energy a stitch against how far the yarn climbs between one interlacing and the next, for a 20 tex cotton jersey at a 3.5 mm loop. The curve falls. A climb is not an extra bend added to a curve that was otherwise unchanged; it is part of the straight line the thread has to span, so a longer climb leaves less slack to be spent on curvature. At a jersey's own climb of one diameter the energy is 24395 nJ against 25060 for the planar model — 2.7% lower, where an earlier estimate on this site put the ride at three per cent of the loop's bending and had the sign the other way round. At a rib's climb of three or four diameters the fall is 33%.

What a knit gives up when it is pressed

The woven half of this collection has had a compression curve for several rungs — a thickness that falls under load, a bearing area that grows, a pressure at every point. The knitted half had a plan and no depth. It has a relaxed thickness and an initial slope now, and the two fabrics turn out to resist for different reasons.

mechanics · Compression The flattening a knitted fabric asks for, against its own tightness. Every point is a solved fabric — 18 of them, over five loop lengths, three relaxation states and three counts — and the vertical axis is the closest its adjacent courses come, in diameters. The values run from 0.707 to 0.839 and they fall on one curve against the tightness factor, which is the model's only dimensionless group. That is what makes this a structural requirement rather than an arithmetical accident of one example: a tighter fabric demands a flatter yarn, by an amount its own tightness decides, and nothing about the fibre or the count enters except through that group.

The count that decides how flat

A knitted fabric's demanded flattening is a function of its tightness factor, and a tightness factor is the square root of a count over a loop length. So a coarser yarn at the same loop is flatter — which is a prediction about a spinner's choice that nobody has framed as one.

setting · Count

Named alongside it

The objects these essays reach for when they reach for this one.

Loop lengthLoopSpecificationCloth thicknessContact forceMunden constantsYarn diameterElasticaContactJammingStitch densityBending rigidity

All concepts