Textile Structure
how cloth is put together
Concept

Flexural rigidity — where it appears

A fabric's resistance to bending, obtained from the bending length by multiplying by the areal weight and cubing the length. It is the quantity a yarn's own bending bracket has to be scaled up to, and the two disagree by a factor that is so far known only as a bracket.

Named by 3 essays across one field — each of them below, with the objects they name alongside it.

The cantilever test. A strip of cloth pushed out over an edge until its tip has drooped to the stated angle. The overhang at that moment gives the bending length, and cubing it with the mass per unit area gives the flexural rigidity.

Bending stiffness and the drape coefficient

Two standard measurements try to say how a fabric hangs. One measures a length and cubes it; the other measures an area and, on the geometry, turns out to be answering a different question from the one it is asked.

mechanics · Drape Wrinkles 127 mm apart. A 300 mm width of a 120 g/m² cloth whose bending length is 20 mm, held under 5 newtons per metre across it and compressed. It cannot carry the compression in the plane, so it leaves the plane, at a wavelength the bending rigidity and the tension settle between them: 127 mm, which is 2.4 wrinkles across the width. The amplitude is drawn and is not computed — this arithmetic sets the spacing and says nothing about the depth.

A cloth cannot carry a push

The net model that runs this site's mechanics has no bending stiffness at all, so it buckles under any compression whatever, into wrinkles of any wavelength whatever. What picks the wavelength is the competition the net leaves out — and the answer is a quarter power, which is why a wrinkle is so hard to change.

mechanics · Buckling The number the drape test does not record. A 150 mm specimen over a 90 mm pedestal, for fabrics from limp to stiff. The curve is the fold count the buckling argument predicts — three quarters of a power of the specimen's radius over its own bending length — and it runs from 2 folds to 11. The number beside each mark is the drape coefficient the same specimen would report, which moves by a few points across the whole range.

The nodes a drape test throws away

A drape test lays a circular specimen over a pedestal, photographs the shadow and reports one number. The specimen also falls into a definite number of folds, which is a buckling mode set by the fabric's own bending length — and the standard method observes it, does not record it, and reports the number it is least sensitive to.

mechanics · Buckling

Named alongside it

The objects these essays reach for when they reach for this one.

Bending lengthCantileverBucklingDrapeDrape coefficientWrinkleFoldInextensibleMeasurementNodeTensionTrellis

All concepts