Textile Structure
how cloth is put together
Concept

Drape coefficient — where it appears

The fraction of a circular specimen's area its shadow still covers once it has draped, which the trade quotes and which answers mainly to the hem radius. It compresses a whole three-dimensional shape into one number, and the number is dominated by the specimen's radius rather than by the cloth.

Named by 4 essays across one field — each of them below, with the objects they name alongside it.

The cantilever test. A strip of cloth pushed out over an edge until its tip has drooped to the stated angle. The overhang at that moment gives the bending length, and cubing it with the mass per unit area gives the flexural rigidity.

Bending stiffness and the drape coefficient

Two standard measurements try to say how a fabric hangs. One measures a length and cubes it; the other measures an area and, on the geometry, turns out to be answering a different question from the one it is asked.

mechanics · Drape What the drape coefficient answers to. The drape coefficient against the number of folds, and against how far the hem has come in. Over the range a real specimen shows, the fold count barely moves it; the hem radius moves it across almost its whole range.

A drape coefficient is one number for a directional thing

A fabric bends more easily one way than the other — a factor of two is ordinary. The drape test reports a single percentage, and the quantity that carries the directionality is the fold count, which the coefficient is almost blind to.

mechanics · Drape The number the drape test does not record. A 150 mm specimen over a 90 mm pedestal, for fabrics from limp to stiff. The curve is the fold count the buckling argument predicts — three quarters of a power of the specimen's radius over its own bending length — and it runs from 2 folds to 11. The number beside each mark is the drape coefficient the same specimen would report, which moves by a few points across the whole range.

The nodes a drape test throws away

A drape test lays a circular specimen over a pedestal, photographs the shadow and reports one number. The specimen also falls into a definite number of folds, which is a buckling mode set by the fabric's own bending length — and the standard method observes it, does not record it, and reports the number it is least sensitive to.

mechanics · Buckling One surplus, three depths, one slope. A 300 mm width of three cloths under 5 newtons per metre, each shortened by 1.0%, drawn at one scale in both directions. a chiffon has wrinkles 43 mm apart and 1.4 mm deep; a shirting has wrinkles 127 mm apart and 4.1 mm deep; a coating has wrinkles 249 mm apart and 8.0 mm deep. All three leave the plane at the same steepest slope, 11.5°, because that slope is set by the surplus alone.

A stiff cloth's wrinkle is deeper and no steeper

Stiffness sets how far apart a wrinkle's crests lie, and the surplus length it has to hide sets the rest. Scale a wrinkle up and its slopes do not change, so one per cent of surplus leaves a chiffon, a shirting and a coating all at 11.5 degrees, 1.4 to 8 millimetres deep. The steepness has no cloth in it — and steepness is what a light reads.

mechanics · Buckling

Named alongside it

The objects these essays reach for when they reach for this one.

Bending lengthFlexural rigidityBucklingCantileverDrapeNodeWrinkleAnisotropyBending stiffnessBiasElasticaFold

All concepts