Textile Structure
how cloth is put together
Concept

Surface shell — where it appears

The outermost layer of a yarn's cross-section, one fibre thick, within which a fibre end is near enough the surface to escape. Its share of the section's area is four fibre diameters over the yarn's, and it sets both how many hairs there are and how long they are.

Named by 3 essays across 3 fields — each of them below, with the objects they name alongside it.

A 20 tex cotton yarn and the fibre standing off it. 6 mm of a 20 tex ring-spun cotton yarn with the hair population this site computes from the yarn's own count and staple — 0.89 hairs per millimetre, every one of them drawn. The two axes are at different scales and have to be — the yarn is 167 µm across and its hairs reach past a millimetre, so a picture at one scale is either a bare line or a black rectangle. Along the yarn is 99 pixels to the millimetre and off it is 74, a 1-fold exaggeration of the vertical. Lengths are drawn from the exponential the model predicts, mean 621 µm; the rules mark one, two and three millimetres with the count a hair-counting instrument reports at each, and the hairs crossing each rule in the drawing are the ones those counts are about. At the yarn's own surface the long hairs cover 1.1% of the space beside it, which is why the picture is mostly gap. Nothing here is the short population, which carries most of the protruding length and none of the reach; and a hair reaching past the room the canvas has is drawn to the edge of it, so the very longest few are shortened in the drawing and not in the arithmetic.

A yarn's surface is a distribution

This collection has computed where a cloth stops, and every one of those numbers is a statement about yarn. What a finger, a plate, a droplet or a ray of light actually meets first is a population of fibre ends standing off the yarn — and it is a population, with a count and a length, rather than a layer with a thickness.

cloth · Hair layer A hair layer is a balance, so singeing does not stay done. The hair population of a 20 tex cotton yarn under rubbing, started from a singed cloth and from an unusually fuzzy one. Abrasion does two opposite things: it frees ends that spinning left buried, from a supply of 2.23 per millimetre in the surface shell, and it removes hairs that are long enough to be caught. Where the two meet is a fixed point at 1.43 per millimetre, and the cloth goes there from either side with the same time constant — 248 cycles to halve the distance, whichever direction it is travelling. A singeing is therefore undone in a few hundred rubs, because the flame changed the stock and not the balance. What is predicted here is that a fixed point exists, that it does not remember the starting state, and that one rate serves both directions; where it sits relative to the spun level needs two rates the model does not supply, and it is set to reproduce the one thing everyone has noticed, which is that fabrics get fuzzier as they are worn.

A hair layer is a balance, not a stock

Singeing takes under one per cent of a cloth's mass and changes its lustre, its friction, its printability and its pilling. It also does not stay done, because rubbing frees fibre ends as fast as it breaks them off, and a flame changes the stock while leaving the balance exactly where it was.

finishing · Hairiness The depth belongs to the fibre and the density to the yarn. Over a 5-fold range of cotton yarn counts, the hair layer's decay length moves by 6.2% and its population moves by 2.37-fold against a square root of 2.24. Both follow from one cancellation. The shell's share of the section is 4d_f/D, the migration period is a fixed number of yarn diameters, and λ = ½(kD)(4d_f/D) — the yarn's diameter divides out and leaves λ = 2k·d_f, a length belonging to the fibre alone. The density has no such cancellation and goes as √(nφ)/L. The two small departures visible here are not two facts: they are the shell's second-order term, and they are the same number to the last bit of a double. The consequence for a spinner is that a coarse yarn is hairier and its hairs are no longer, so everything that depends on reach — pilling, prickle, a printed edge — is decided by the fibre and not by the count.

Hairiness goes as the root of the count

A coarse yarn is hairier than a fine one and everybody knows it. What nobody has said is that its hairs are no longer — the count and the length obey different laws, one rises as a square root and the other does not move at all, and the identity behind both was asserted on this site for an entirely unrelated reason.

setting · Hair layer

Named alongside it

The objects these essays reach for when they reach for this one.

Escape fractionHair layerProtrusion lengthFibre countHairinessMigration periodStaple lengthAbrasionCrown heightFibre finenessFibre migrationHair balance

All concepts