Textile Structure
how cloth is put together
Concept

Crown height — where it appears

How far the top of one thread system stands above the middle of the cloth — half its crimp height plus half its diameter. The two systems agree only when their crimps divide in proportion to their diameters, so a cloth usually meets the world on one system alone until the other is reached.

Named by 10 essays across 5 fields — each of them below, with the objects they name alongside it.

The surface of a 2/2 twill, in plan. One repeat of a 2/2 twill in sheeting, drawn 2 × 2 times, with every point painted in the colour of whichever thread owns the outside of the cloth there and at an opacity set by how high it is. The range is 221.0 µm from the highest point to the lowest, the root-mean-square roughness is 74.9 µm, and 30% of the plan is hole rather than surface. The bright ribbons are the float plateaux, where a thread lies straight across the threads it passes over and its outside is a horizontal line rather than a point — which is the whole of what follows. The warp crowns at 190.8 µm and the weft at 182.8 µm, a step of 8.0 µm, so the cloth touches the world on its warp alone until anything pressing on it has sunk that far.

A cloth has an outside

Every quantity in this collection is a property of the inside of a fabric — a crimp, a cover, a hole, a fibre count. None of them says where the cloth stops. The outside is a height field the draft computes, its crowns stand at two different levels, and which of the two is higher decides what the cloth touches the world with.

cloth · Surface The bearing curves of 4 weaves in one cloth. How much of the plan is within a given depth of the highest point, for plain, 2/2 twill, satin 5, satin 8 — all in sheeting, all at the same sett, the same counts and the same thickness. They differ only in their drafts. At a hundredth of the cloth's thickness the last of them is touching 9 times the area of the first, and the gap widens as the depth shrinks, because the curves do not merely differ by a factor — they have different exponents. A crown that is a line opens as the square root of the depth and a crown that is a point opens in proportion to it.

The curve that says what a cloth touches with

Take a cloth's surface and ask what fraction of the plan lies within a given depth of its highest point. The answer is one curve, it answers every question of the form what does this touch, and its behaviour at the top is decided by a single bit of the draft — whether the longest float is one crossing or more than one.

cloth · Surface The crown line of every four-by-four draft there is. All 22,874 four-by-four drafts in which every end and every pick interlaces at least once, at sheeting's construction, counted by how much horizontal crown line each carries per square millimetre. The bar at zero holds 2 of them — the two plain weaves, and nothing else in the catalogue. Every other draft has a float somewhere, and a float is a plateau, and a plateau is a line of constant height. So the whole catalogue divides into two drafts that touch at points and 22,872 that touch along lines, with no intermediate case, because a float is either present or it is not.

Two drafts of twenty-two thousand

Every four-by-four draft there is, measured by how much horizontal crown line its surface carries. Two of them carry none — the plain weave and its translation, and nothing else in the catalogue — and the quantity turns out to be smallest for the most balanced cloths and largest for the most one-sided, which is the opposite of what a float count suggests.

cloth · Surface What it costs to touch a cloth. The pressure needed to bring a stated fraction of the plan into contact, for plain, 2/2 twill, satin 8 in sheeting. Reaching two per cent of the plan takes 2.83 kPa on a plain and 0.05 on a satin 8, a factor of 55. The stiffness in this figure is fitted and is labelled as such. A yarn's resistance to being squashed out of round has no lower bound at all — a bundle of fibres free to slide is a fluid in cross-section — so no bracket exists to compute this from, and what is used is the value this collection fitted to measured fabric thickness. Every curve moves together across its published range, which is why the ratio between weaves survives and the absolute values are quoted with the fit named.

How much of a cloth is touching

Press a fabric against a flat plate with the weight of a hand and ask what fraction of it is actually in contact. The bearing curve answers, and the answer is about four per cent — of which the great majority is not the cloth's surface at all, but the hairs standing off it, which nothing in this arithmetic can see.

cloth · Contact The presser foot sinks 1.8 µm into a 2/2 twill. A thickness gauge presses a flat foot onto the cloth at 1 kPa and reads the gap. It does not read the geometric thickness. The foot sinks until the area it is touching can carry the load, and that is 2.57% of the plan at a depth of 1.8 µm — so a 2/2 twill in sheeting whose outside stands 381.6 µm apart measures 379.8 µm. How far the foot sinks is a property of the draft, because the bearing area near the top is, and a weave with plateaux stops the foot in a fraction of the distance a plain weave lets it travel. The transverse stiffness used here is fitted to measured fabric thickness rather than predicted: across its published range the reading moves between 377.0 µm and 380.6 µm.

A thickness gauge reads the draft

A presser foot does not stop at the top of a cloth. It sinks until the area it is touching can carry the load, and how far that is depends on the shape of the bearing curve near the top — which is a property of the weave. So there is a weave term inside a measurement nobody thinks of as a weave measurement, and it is worth about one per cent.

cloth · Contact A 20 tex cotton yarn and the fibre standing off it. 6 mm of a 20 tex ring-spun cotton yarn with the hair population this site computes from the yarn's own count and staple — 0.89 hairs per millimetre, every one of them drawn. The two axes are at different scales and have to be — the yarn is 167 µm across and its hairs reach past a millimetre, so a picture at one scale is either a bare line or a black rectangle. Along the yarn is 99 pixels to the millimetre and off it is 74, a 1-fold exaggeration of the vertical. Lengths are drawn from the exponential the model predicts, mean 621 µm; the rules mark one, two and three millimetres with the count a hair-counting instrument reports at each, and the hairs crossing each rule in the drawing are the ones those counts are about. At the yarn's own surface the long hairs cover 1.1% of the space beside it, which is why the picture is mostly gap. Nothing here is the short population, which carries most of the protruding length and none of the reach; and a hair reaching past the room the canvas has is drawn to the edge of it, so the very longest few are shortened in the drawing and not in the arithmetic.

A yarn's surface is a distribution

This collection has computed where a cloth stops, and every one of those numbers is a statement about yarn. What a finger, a plate, a droplet or a ray of light actually meets first is a population of fibre ends standing off the yarn — and it is a population, with a count and a length, rather than a layer with a thickness.

cloth · Hair layer Two cloths touch on a fraction of what one cloth does. A 2/2 twill in sheeting pressed against a flat plate, and the same cloth pressed against another piece of itself. At an approach of 24.9 µm the single surface is touching 15.87% of the plan and the pair 3.130% — a factor of 5. The reason is that a gap between two rough surfaces is the sum of two depths, so both surfaces have to be near their own maxima at the same place, and the chance of that is the product of two small numbers. The pair's curve is the convolution of the two height distributions, computed exactly on histograms rather than fitted to a Gaussian — because a woven surface is bimodal and nothing about it is Gaussian.

Friction is two surfaces, not one

A gap between two rough bodies is the sum of two depths, so two cloths face to face touch on the convolution of their height distributions rather than on either of them. At the approach a light touch produces that is twenty times less contact than the same cloth against a plate — which is why a fabric's friction against a plate and against another fabric are two different measurements.

finishing · Friction A seam stands 763 µm proud of a cloth 382 µm thick. A 10 mm seam allowance of 3 plies in a 60 mm panel of one, in sheeting. The seam stands 763 µm above the body of the garment — which is 102 times the depth at which the body cloth first comes into contact with anything at all. So a flat surface rubbed across this garment touches only the seam, over 16.7% of the area drawn, until it has crushed a whole thickness of fabric. Everything this collection computes about where wear lands on a woven surface applies inside that 16.7%, and the other 83.3% is not being touched.

A seam stands proud and wears first

A seam allowance is three plies where the garment is one, so it stands three quarters of a millimetre above a cloth whose own surface has a few micrometres of contact in it. Anything flat rubbed across the garment touches the seam and nothing else — all of the wear on two or three per cent of the area, until a whole thickness of fabric has been crushed.

applied · Seams The sett sets the pitch of the relief and not its height. A 2/2 twill in sheeting set from 14 to 29 ends per centimetre. The spacing of the crowns falls from 714 µm to 345 µm — in exact proportion to the sett, because it is the sett — while the height the surface swings through moves from 381 µm to 381 µm, which is not at all. The reason is the closure condition: the two crimp heights must add to the sum of the two diameters whatever the spacing, so the amplitude of the surface is pinned by the yarn and only its wavelength is free. The third curve is the root-mean-square roughness measured off the sampled surface, which wanders by a few per cent because it depends on where the sample grid falls relative to the crowns — it is drawn to show that it has no trend, not to be read off. A closer sett therefore makes a finer-grained cloth and not a smoother one, and the two are confused in every description of fabric handle. At 32 ends per centimetre the geometry refuses altogether: the cloth is close enough that its crimp can no longer divide equally, which is the jam arriving as a loss of symmetry rather than as a loss of room.

The sett owns the pitch and the yarn owns the height

Set a cloth twice as close and its surface does not get smoother. The crowns come twice as often, because that is what a sett is, and they stand at very nearly the same height, because the closure condition pins the amplitude to the yarn — so a fine cloth is finer-grained rather than flatter, and the two are confused in every description of handle.

setting · Sett A thickness is a property of the pressure it was measured at. What a gauge reports for sheeting against the pressure it presses with. At 1 kPa it reads 0.382 mm, which is the cloth; at 0.02 kPa it reads 0.555 mm, which is the cloth plus 87 µm of hair on each face. The difference is 31% of the reading and it is not a compressibility: nothing in the fabric has been squashed, the foot has simply stopped in a different place. That is why every thickness standard specifies its pressure to two figures, and why comparing a thickness from one standard with a thickness from another is comparing two different measurements of two different objects. The dashed line is the cloth's own geometric thickness, which no reading below the crossover ever reaches.

A compression curve is two laws in series

A published fabric compression exponent is a fitted number with no derivation attached, and this site has already said why: the range it is fitted over straddles two regimes. One of them turns out not to be in the cloth at all.

mechanics · Compression

Named alongside it

The objects these essays reach for when they reach for this one.

Bearing curveCloth thicknessReal contact areaSurface heightContact pressureCrown lineFloat lengthPlateauClosure conditionCrimp heightHair layerHairiness

All concepts