Textile Structure
how cloth is put together
Concept

Bearing curve — where it appears

The fraction of a surface's plan lying within a stated depth of its highest point, which is the cumulative distribution of its height read from the top down. Borrowed from surface metrology, it answers every question of the form what does this touch with, and for a woven cloth it is derived from the draft rather than measured.

Named by 17 essays across 5 fields — each of them below, with the objects they name alongside it.

The bearing curves of 4 weaves in one cloth. How much of the plan is within a given depth of the highest point, for plain, 2/2 twill, satin 5, satin 8 — all in sheeting, all at the same sett, the same counts and the same thickness. They differ only in their drafts. At a hundredth of the cloth's thickness the last of them is touching 9 times the area of the first, and the gap widens as the depth shrinks, because the curves do not merely differ by a factor — they have different exponents. A crown that is a line opens as the square root of the depth and a crown that is a point opens in proportion to it.

The curve that says what a cloth touches with

Take a cloth's surface and ask what fraction of the plan lies within a given depth of its highest point. The answer is one curve, it answers every question of the form what does this touch, and its behaviour at the top is decided by a single bit of the draft — whether the longest float is one crossing or more than one.

cloth · Surface The crown line of every four-by-four draft there is. All 22,874 four-by-four drafts in which every end and every pick interlaces at least once, at sheeting's construction, counted by how much horizontal crown line each carries per square millimetre. The bar at zero holds 2 of them — the two plain weaves, and nothing else in the catalogue. Every other draft has a float somewhere, and a float is a plateau, and a plateau is a line of constant height. So the whole catalogue divides into two drafts that touch at points and 22,872 that touch along lines, with no intermediate case, because a float is either present or it is not.

Two drafts of twenty-two thousand

Every four-by-four draft there is, measured by how much horizontal crown line its surface carries. Two of them carry none — the plain weave and its translation, and nothing else in the catalogue — and the quantity turns out to be smallest for the most balanced cloths and largest for the most one-sided, which is the opposite of what a float count suggests.

cloth · Surface What it costs to touch a cloth. The pressure needed to bring a stated fraction of the plan into contact, for plain, 2/2 twill, satin 8 in sheeting. Reaching two per cent of the plan takes 2.83 kPa on a plain and 0.05 on a satin 8, a factor of 55. The stiffness in this figure is fitted and is labelled as such. A yarn's resistance to being squashed out of round has no lower bound at all — a bundle of fibres free to slide is a fluid in cross-section — so no bracket exists to compute this from, and what is used is the value this collection fitted to measured fabric thickness. Every curve moves together across its published range, which is why the ratio between weaves survives and the absolute values are quoted with the fit named.

How much of a cloth is touching

Press a fabric against a flat plate with the weight of a hand and ask what fraction of it is actually in contact. The bearing curve answers, and the answer is about four per cent — of which the great majority is not the cloth's surface at all, but the hairs standing off it, which nothing in this arithmetic can see.

cloth · Contact The presser foot sinks 1.8 µm into a 2/2 twill. A thickness gauge presses a flat foot onto the cloth at 1 kPa and reads the gap. It does not read the geometric thickness. The foot sinks until the area it is touching can carry the load, and that is 2.57% of the plan at a depth of 1.8 µm — so a 2/2 twill in sheeting whose outside stands 381.6 µm apart measures 379.8 µm. How far the foot sinks is a property of the draft, because the bearing area near the top is, and a weave with plateaux stops the foot in a fraction of the distance a plain weave lets it travel. The transverse stiffness used here is fitted to measured fabric thickness rather than predicted: across its published range the reading moves between 377.0 µm and 380.6 µm.

A thickness gauge reads the draft

A presser foot does not stop at the top of a cloth. It sinks until the area it is touching can carry the load, and how far that is depends on the shape of the bearing curve near the top — which is a property of the weave. So there is a weave term inside a measurement nobody thinks of as a weave measurement, and it is worth about one per cent.

cloth · Contact Three kinds of surface, and only one of them starts open. The bearing curves of a 2/2 twill in sheeting, of a terry loop pile, and of a cut corduroy pile of 30 tex, over the first six per cent of a cloth's thickness. The woven curve opens as the square root of the depth and the loop pile's does the same, because a loop's top is a curved thread like any other. The cut pile does not open: it is a flat line at 5.2% of the plan, from a depth of nothing, because a blade severed every tuft in one pass and left every end in one plane. That is not a larger contact area, it is a different kind of contact area — one that does not vanish as the load goes to zero, which is a property no woven surface has.

A pile is the only surface with no crowns

Every other fabric touches on the tops of curved threads, so its contact vanishes as the load goes to zero and the pressure on what is touching rises without limit. A cut pile touches on flat ends left in one plane by a blade — so its contact is finite at no load at all, its pressure concentration is bounded, and it is the only fabric whose abrasion mass loss is an honest measure of its damage.

fancy · Pile What a raising machine can catch in a 2/2 twill. The draft with every weft float long enough for a raising wire to lift marked on it. The teeth need an unsupported length of thread on the surface, so a cloth in which every thread is bound at every crossing offers them nothing at all — which is why a napped fabric is always a twill or a satin and never a plain weave.

Raising moves the surface onto the hairs

A raising machine pulls fibre ends up out of the floats, and what a finger or a light then meets is not the cloth's surface at all but a layer of loose fibre standing above it. The criterion for which cloths can be raised is the same criterion, exactly, that decides which cloths have crown line — so raising spends the surface that would have made the fabric shine.

finishing · Nap A cloth loses its strength long before it loses its mass. Rubbing a 2/2 twill in sheeting down, plotted against how much of its own solid volume has gone. The lower curve is the fraction of the plan the rubbing is touching; the upper is the fraction of the warp's section that has been cut away. They are wildly different because the wear is spread and the damage is concentrated: material comes off the whole surface, but it comes off every thread at the same place, and a thread breaks at its thinnest place. At one per cent of the mass gone the section is already 5% smaller. That is why a fabric that looks barely worn fails a strength test, and why abrasion resistance measured as mass loss and abrasion resistance measured as residual strength are two different quantities that are quoted as one.

A cloth loses its strength before its mass

Rub a fabric and it sheds material from all over its surface, but it sheds it from every thread at the same place — and a thread breaks at its thinnest place. So the strength gone is always several times the mass gone, the ratio is computable from the bearing curve, and it is worst for the weave whose crowns are points.

applied · Damage What it takes to bury a cloth's crowns. The film needed to fill a fabric's surface to a stated level, for plain, 2/2 twill, satin 8 in sheeting, at a film density of 1.2 g/cm³. Burying the crowns entirely takes 187 g/m² on the plain, 186 g/m² on the 2/2 twill, 183 g/m² on the satin 8 — and the ordering is not the ordering of roughness. A weave with plateaux presents a wide flat top that a thin film covers, and a weave with points presents crowns with valleys between them that the film has to fill before it is continuous anywhere. Every gram spent filling a valley is a gram that is not bridging a hole, which is where a coated cloth fails.

A coating fills the crowns before it bridges the holes

A film does not sit on a cloth, it fills it — and the volume it has to supply to reach a level is the integral of one minus the bearing area. Burying an ordinary sheeting's crowns takes 185 grams a square metre, which is more than the cloth weighs, and the whole of the weave's influence is spent in the first ten of them.

finishing · Coating At 0.1 kilopascals the plate is standing on hair. A flat foot pressed onto sheeting at 0.1 kPa, over 3 mm of cloth. It stops 25 µm above the cloth's own crowns, because that is where the hairs it is bending can carry the load: of the 10 hairs drawn, 9 reach higher than the foot and are laid over under it, and the rest are untouched. The vertical scale is set by the approach and not by the layer — 5188 pixels to the millimetre off the cloth against 192 along it — because the foot's height above the crowns is tens of micrometres and the layer it stands in is more than a millimetre, so a picture at one scale shows the second and not the first. The thickness reported is 0.432 mm against 0.382 mm for the cloth itself, so 12% of the reading is a population and not a fabric. The hair layer carries up to 0.23 kPa before the foot reaches the crowns at all. A laid-over hair is drawn as two straight segments where a real one is an elastica: the corner is a convenience and the height it turns at is the measurement. What the picture cannot show is that a bent hair leans on its neighbours, which the arithmetic behind it does not know either.

A light touch never reaches the crowns

This collection found that a plain weave touches at points and every other cloth touches along lines, and that the difference is an exponent rather than a factor. It is a real result about a real surface, and at the pressures a fabric is actually touched at, nothing ever reaches that surface.

cloth · Contact Two cloths touch on a fraction of what one cloth does. A 2/2 twill in sheeting pressed against a flat plate, and the same cloth pressed against another piece of itself. At an approach of 24.9 µm the single surface is touching 15.87% of the plan and the pair 3.130% — a factor of 5. The reason is that a gap between two rough surfaces is the sum of two depths, so both surfaces have to be near their own maxima at the same place, and the chance of that is the product of two small numbers. The pair's curve is the convolution of the two height distributions, computed exactly on histograms rather than fitted to a Gaussian — because a woven surface is bimodal and nothing about it is Gaussian.

Friction is two surfaces, not one

A gap between two rough bodies is the sum of two depths, so two cloths face to face touch on the convolution of their height distributions rather than on either of them. At the approach a light touch produces that is twenty times less contact than the same cloth against a plate — which is why a fabric's friction against a plate and against another fabric are two different measurements.

finishing · Friction A seam stands 763 µm proud of a cloth 382 µm thick. A 10 mm seam allowance of 3 plies in a 60 mm panel of one, in sheeting. The seam stands 763 µm above the body of the garment — which is 102 times the depth at which the body cloth first comes into contact with anything at all. So a flat surface rubbed across this garment touches only the seam, over 16.7% of the area drawn, until it has crushed a whole thickness of fabric. Everything this collection computes about where wear lands on a woven surface applies inside that 16.7%, and the other 83.3% is not being touched.

A seam stands proud and wears first

A seam allowance is three plies where the garment is one, so it stands three quarters of a millimetre above a cloth whose own surface has a few micrometres of contact in it. Anything flat rubbed across the garment touches the seam and nothing else — all of the wear on two or three per cent of the area, until a whole thickness of fabric has been crushed.

applied · Seams Two exponents in a compression curve. How far a flat plate sinks into plain, 2/2 twill, satin 8 in sheeting, against the pressure it is applying, on logarithmic axes where a power law is a straight line. The measured slopes over the light end of the range are 0.50 for the plain, 0.67 for the 2/2 twill, 0.67 for the satin 8 — against two thirds predicted for any weave carrying a float and one half for a weave carrying none. The prediction is one line of algebra: pressure is a stiffness times a strain times a bearing fraction, the bearing fraction is a square root of depth for a plateau and linear in it for a point, so the pressure is the three-halves power in the first case and the square in the second. Nothing is fitted to produce it; the slopes are measured afterwards and compared. At the heavy end every curve bends, because the crowns have merged and the cloth has stopped being a surface and started being a solid — which is a different regime with a different law, and it belongs to the compaction of a fibre mass rather than to the geometry of an interlacement.

A cloth compresses along its own bearing curve

A fabric's pressure–thickness curve is always fitted with an empirical power law and the exponent is reported without explanation. It is not empirical. At light loads it is two thirds for any weave carrying a float and one half for a weave carrying none, and the two numbers come out of one line of algebra with nothing fitted in it.

mechanics · Compression A thickness is a property of the pressure it was measured at. What a gauge reports for sheeting against the pressure it presses with. At 1 kPa it reads 0.382 mm, which is the cloth; at 0.02 kPa it reads 0.555 mm, which is the cloth plus 87 µm of hair on each face. The difference is 31% of the reading and it is not a compressibility: nothing in the fabric has been squashed, the foot has simply stopped in a different place. That is why every thickness standard specifies its pressure to two figures, and why comparing a thickness from one standard with a thickness from another is comparing two different measurements of two different objects. The dashed line is the cloth's own geometric thickness, which no reading below the crossover ever reaches.

A compression curve is two laws in series

A published fabric compression exponent is a fitted number with no derivation attached, and this site has already said why: the range it is fitted over straddles two regimes. One of them turns out not to be in the cloth at all.

mechanics · Compression A 100-gram bouclé in section, with the depth to its own load path. A bouclé cloth of 100 grams a square metre in section: the core and binder along the bottom, carrying everything, with the effect thread's loops standing 0.31 millimetres above them. The cloth's surface is the loops and nothing else — its loop envelope is 12.6 times its count diameter — so a rubbing surface meets effect thread first and reaches the core only after that depth. 60.7 per cent of the yarn's mass is effect thread on no load path and 39.3 per cent is core and binder. What the section cannot show is the third dimension: the loops of neighbouring yarns lie between these and are pressed by them.

A bouclé wears from the loops down

A cloth loses its strength before its mass, because a woven cloth's crowns are the very threads that carry the tension. A bouclé inverts it exactly. Its surface is its loops, its loops hang off a core that carries everything, and 61 per cent of its yarn is on no load path at all — so a rub takes three tenths of a millimetre of thread that does nothing before it reaches anything that does, and the cloth is ruined to look at while it is still as strong as it was woven.

fancy · Fancy yarn The four-by-four catalogue's crown line, counted three ways. Every one of the 22,874 interlacing four-by-four drafts, binned by how much horizontal crown line it carries, under three counts: both systems summed, which is what the published census reports; the warp alone; and the weft alone. A bearing curve sees one system, because a plate meets whichever crown stands higher and meets nothing else until it has sunk past the step between them. Under the summed count 2 drafts carry none; under the warp alone 494 do, and under the weft alone 494. What the histogram cannot show is which drafts moved, which is most of them.

The census counted two systems and a surface has one

Two drafts of twenty-two thousand touch at points, and the two are the plain weave. That is a count of the crown line both systems carry, and a bearing curve sees one: a plate meets whichever crown stands higher and meets nothing else until it has sunk past the step. Counted the way a surface is read, 494 drafts touch at points rather than two — and which 494 depends on a crimp division already called a convention rather than a measurement.

cloth · Surface The bearing crowns of 2/2 twill and 2/2 hopsack, over 3 repeats. The cells at which the warp is on the face, drawn over 3 repeats of each draft — which is the surface a plate meets, since the other system is a step below it. 2/2 twill has 1 component in its repeat and a path that runs the whole way across the cloth, in both directions; 2/2 hopsack has 2 components in its repeat and no path across the cloth at all. Both carry the same length of crown line by the bearing count, and one is a ridge while the other is a field of islands. What the drawing cannot show is the depth of the gaps between them, which is the step to the second system and is a few micrometres.

Four drafts in five have no path along their own crowns

A 2/2 twill and a 2/2 hopsack carry exactly the same length of bearing crown line, which the surface census noted and could not explain. One of them is a ridge running diagonally across the cloth without a break; the other is a field of square islands with no path between them. Counted over the whole catalogue, 4,016 of 22,874 drafts have a crown path that reaches the far side, 1,616 have one in both directions, and 130 have crowns with no neighbour at all.

cloth · Surface What leaving the plane costs, which is less than nothing. Bending energy a stitch against how far the yarn climbs between one interlacing and the next, for a 20 tex cotton jersey at a 3.5 mm loop. The curve falls. A climb is not an extra bend added to a curve that was otherwise unchanged; it is part of the straight line the thread has to span, so a longer climb leaves less slack to be spent on curvature. At a jersey's own climb of one diameter the energy is 24395 nJ against 25060 for the planar model — 2.7% lower, where an earlier estimate on this site put the ride at three per cent of the loop's bending and had the sign the other way round. At a rib's climb of three or four diameters the fall is 33%.

What a knit gives up when it is pressed

The woven half of this collection has had a compression curve for several rungs — a thickness that falls under load, a bearing area that grows, a pressure at every point. The knitted half had a plan and no depth. It has a relaxed thickness and an initial slope now, and the two fabrics turn out to resist for different reasons.

mechanics · Compression

Named alongside it

The objects these essays reach for when they reach for this one.

Crown lineReal contact areaCloth thicknessContact pressureCrown heightSurface heightAbrasionPlateauCatalogueCensusCompression energyFloat length

All concepts