Textile Structure
how cloth is put together
Concept

Plateau — where it appears

The flat run at the top of a float, where a thread lies straight across every crossing thread it passes over. It exists only where a thread is on the face for two crossings or more, and it is what makes a crown a ridge rather than a summit.

Named by 8 essays across 2 fields — each of them below, with the objects they name alongside it.

The surface of a 2/2 twill, in plan. One repeat of a 2/2 twill in sheeting, drawn 2 × 2 times, with every point painted in the colour of whichever thread owns the outside of the cloth there and at an opacity set by how high it is. The range is 221.0 µm from the highest point to the lowest, the root-mean-square roughness is 74.9 µm, and 30% of the plan is hole rather than surface. The bright ribbons are the float plateaux, where a thread lies straight across the threads it passes over and its outside is a horizontal line rather than a point — which is the whole of what follows. The warp crowns at 190.8 µm and the weft at 182.8 µm, a step of 8.0 µm, so the cloth touches the world on its warp alone until anything pressing on it has sunk that far.

A cloth has an outside

Every quantity in this collection is a property of the inside of a fabric — a crimp, a cover, a hole, a fibre count. None of them says where the cloth stops. The outside is a height field the draft computes, its crowns stand at two different levels, and which of the two is higher decides what the cloth touches the world with.

cloth · Surface The bearing curves of 4 weaves in one cloth. How much of the plan is within a given depth of the highest point, for plain, 2/2 twill, satin 5, satin 8 — all in sheeting, all at the same sett, the same counts and the same thickness. They differ only in their drafts. At a hundredth of the cloth's thickness the last of them is touching 9 times the area of the first, and the gap widens as the depth shrinks, because the curves do not merely differ by a factor — they have different exponents. A crown that is a line opens as the square root of the depth and a crown that is a point opens in proportion to it.

The curve that says what a cloth touches with

Take a cloth's surface and ask what fraction of the plan lies within a given depth of its highest point. The answer is one curve, it answers every question of the form what does this touch, and its behaviour at the top is decided by a single bit of the draft — whether the longest float is one crossing or more than one.

cloth · Surface The crown line of every four-by-four draft there is. All 22,874 four-by-four drafts in which every end and every pick interlaces at least once, at sheeting's construction, counted by how much horizontal crown line each carries per square millimetre. The bar at zero holds 2 of them — the two plain weaves, and nothing else in the catalogue. Every other draft has a float somewhere, and a float is a plateau, and a plateau is a line of constant height. So the whole catalogue divides into two drafts that touch at points and 22,872 that touch along lines, with no intermediate case, because a float is either present or it is not.

Two drafts of twenty-two thousand

Every four-by-four draft there is, measured by how much horizontal crown line its surface carries. Two of them carry none — the plain weave and its translation, and nothing else in the catalogue — and the quantity turns out to be smallest for the most balanced cloths and largest for the most one-sided, which is the opposite of what a float count suggests.

cloth · Surface A round thread reflects a beam into a fan. A round thread seen end-on, with a beam arriving from straight above. Every point across the thread has its own normal, tilted by the angle it sits at, and mirrors the beam through twice that angle — so a single direction in becomes a whole fan out, spread across the thread and not at all along it. Seen from the front that fan is a highlight lying along the thread, exactly as long as the length of thread that is straight, which is the float. Nothing about this depends on the fibre. A cylinder of any material returns a fan, and the only way to narrow it is to stop the section being a cylinder — which is what a calender does.

A float reflects into a line

A cylinder cannot return a beam to a point. Its normals sweep the whole half-turn across it and nothing at all along it, so a straight thread throws light into a fan — seen as a highlight lying along the thread, exactly as long as the length of thread that is straight. The lobe of a satin is twice as narrow along the thread as across it; the lobe of a plain weave is exactly round.

weaves · Shine How much every four-by-four draft can shine. All 22,874 four-by-four drafts in which every end and every pick interlaces, at sheeting's construction and a tolerance of 2°, counted by specular area. The range runs from 0.02% to 0.93%, a factor of 60.0, and the distribution is not smooth — it clusters, because the quantity behind it is a count of whole crossings and takes only certain values. The dullest drafts in the catalogue are the plain weaves, which have no plateau at all and shine only from the crowns of their turns; the brightest carry the most float on the face, with the fewest turns interrupting it. Lustre over the catalogue is a length census, and nothing about the yarn enters it.

Lustre is a length times a width

The specular area of a cloth factors exactly: a length of crown line, which the draft supplies, times a width of section within the tolerance, which the yarn and the finish supply. Neither factor knows anything about the other, and over the four-by-four catalogue the first alone spans a factor of sixty.

weaves · Shine A crepe's search has 4,416 winners and the surface separates them. All 5,040 rearrangements of the base this collection's crepe is built on, scored by how unevenly their crown line is spread over the repeat. 4,416 of them reach the correlation floor, which is the criterion the crepe was chosen by — so that criterion is not choosing, it is tying, and the search takes the first of a very large set. 28 of the rearrangements have a perfectly even surface, the bar at zero, and 16 of those are also at the correlation floor. The crepe actually drawn, marked, sits at 0.236 — the thirty-eighth percentile, better than most and not at the floor. The improvement is available, it costs nothing, and no criterion this collection had could see it.

A crepe is flat in its draft and not in its surface

A crepe weave is chosen by pushing the draft's correlations as flat as they will go. That criterion turns out to tie: on the base this collection uses, 4,416 of the 5,040 rearrangements reach the floor. Sixteen of them additionally spread their crown line perfectly evenly — and the crepe actually drawn is not one of the sixteen.

weaves · Texture weaves The four-by-four catalogue's crown line, counted three ways. Every one of the 22,874 interlacing four-by-four drafts, binned by how much horizontal crown line it carries, under three counts: both systems summed, which is what the published census reports; the warp alone; and the weft alone. A bearing curve sees one system, because a plate meets whichever crown stands higher and meets nothing else until it has sunk past the step between them. Under the summed count 2 drafts carry none; under the warp alone 494 do, and under the weft alone 494. What the histogram cannot show is which drafts moved, which is most of them.

The census counted two systems and a surface has one

Two drafts of twenty-two thousand touch at points, and the two are the plain weave. That is a count of the crown line both systems carry, and a bearing curve sees one: a plate meets whichever crown stands higher and meets nothing else until it has sunk past the step. Counted the way a surface is read, 494 drafts touch at points rather than two — and which 494 depends on a crimp division already called a convention rather than a measurement.

cloth · Surface The bearing crowns of 2/2 twill and 2/2 hopsack, over 3 repeats. The cells at which the warp is on the face, drawn over 3 repeats of each draft — which is the surface a plate meets, since the other system is a step below it. 2/2 twill has 1 component in its repeat and a path that runs the whole way across the cloth, in both directions; 2/2 hopsack has 2 components in its repeat and no path across the cloth at all. Both carry the same length of crown line by the bearing count, and one is a ridge while the other is a field of islands. What the drawing cannot show is the depth of the gaps between them, which is the step to the second system and is a few micrometres.

Four drafts in five have no path along their own crowns

A 2/2 twill and a 2/2 hopsack carry exactly the same length of bearing crown line, which the surface census noted and could not explain. One of them is a ridge running diagonally across the cloth without a break; the other is a field of square islands with no path between them. Counted over the whole catalogue, 4,016 of 22,874 drafts have a crown path that reaches the far side, 1,616 have one in both directions, and 130 have crowns with no neighbour at all.

cloth · Surface

Named alongside it

The objects these essays reach for when they reach for this one.

Crown lineCatalogueCensusFloat lengthSurface heightBearing curveCrown heightBalanceCloth thicknessCrimp heightLustreSpecular area

All concepts