Textile Structure
how cloth is put together
Concept

Catalogue — where it appears

The complete enumeration of the weaves at a stated repeat, quotiented by the operations that leave a cloth the same cloth. The operations manuals name reach far less of it than they imply, which is a count rather than an opinion.

Named by 9 essays across 2 fields — each of them below, with the objects they name alongside it.

What four notations can say. Four ways of writing a weave down, with how many of the 426 four-by-four cloths each can express and whether expressing one identifies it: point paper, 426, identifies; a four-part draft on 3 shafts and 4 treadles, 110, identifies; a fraction name, 5, does not identify; a longest-float specification, 426, does not identify. A longest-float specification names every cloth and separates them into only 3 classes.

Four ways to write a weave down

A weave's name in the trade is a pair of numbers — 2/2, 3/1, five-end satin — and the notation is so universal that it is easy to forget it is a notation. It has an image and the image is computable: of the 426 cloths at four by four, five have a name of that kind, and there are four names for the five.

cloth · Notation The basic weaves at four by four. Plain weave and the three twills a repeat of four admits, each drawn with its longest float and its layer count computed from the matrix. The fifth frame is empty: a satin needs a move coprime with its order and neither one nor one less than it, and four ends admits 0 such moves. So the smallest interesting repeat contains two of the three weaves every manual begins with.

The three basic weaves do not generate the rest

Every weaving manual opens with the same sentence: there are three basic weaves, and everything else is derived from them. The complete catalogue of the smallest interesting repeat is in hand, so the claim can be checked instead of repeated. Starting from plain weave, every twill and every satin, and applying every derivation the manuals name, reaches nine of the 426 cloths that exist there.

weaves · Derivation The crown line of every four-by-four draft there is. All 22,874 four-by-four drafts in which every end and every pick interlaces at least once, at sheeting's construction, counted by how much horizontal crown line each carries per square millimetre. The bar at zero holds 2 of them — the two plain weaves, and nothing else in the catalogue. Every other draft has a float somewhere, and a float is a plateau, and a plateau is a line of constant height. So the whole catalogue divides into two drafts that touch at points and 22,872 that touch along lines, with no intermediate case, because a float is either present or it is not.

Two drafts of twenty-two thousand

Every four-by-four draft there is, measured by how much horizontal crown line its surface carries. Two of them carry none — the plain weave and its translation, and nothing else in the catalogue — and the quantity turns out to be smallest for the most balanced cloths and largest for the most one-sided, which is the opposite of what a float count suggests.

cloth · Surface The float a point fault gives a weave, over every draft there is. Every four-by-four draft that describes one cloth — 22,730 of them — laid out as 8 ends by 8 picks, with each intersection of its repeat reversed in turn and the longest float that produces kept. There are two answers and no others. 90 drafts hold the fault to a float of 3; 22,640 — 99.6% of every weave there is — hand it a float of 7. The mechanism behind the second number is that a reversal at a binding point joins the two floats on either side of it, so a weave with runs separated by single binding intersections gives a single mistake the sum of two of its own floats. The 90 that escape are the drafts whose floats are short and evenly spaced — the plain weave and the ribs — which is not the class of weave the trade recommends for hiding a fault.

Which weave hides a fault

The trade says a busy weave hides a mistake. Every four-by-four draft there is was laid out as cloth and given every wrong lift it could have, and ninety-nine in a hundred hand that single mistake a float of seven — because a reversal does not lengthen a float, it joins two.

weaves · Float How much every four-by-four draft can shine. All 22,874 four-by-four drafts in which every end and every pick interlaces, at sheeting's construction and a tolerance of 2°, counted by specular area. The range runs from 0.02% to 0.93%, a factor of 60.0, and the distribution is not smooth — it clusters, because the quantity behind it is a count of whole crossings and takes only certain values. The dullest drafts in the catalogue are the plain weaves, which have no plateau at all and shine only from the crowns of their turns; the brightest carry the most float on the face, with the fewest turns interrupting it. Lustre over the catalogue is a length census, and nothing about the yarn enters it.

Lustre is a length times a width

The specular area of a cloth factors exactly: a length of crown line, which the draft supplies, times a width of section within the tolerance, which the yarn and the finish supply. Neither factor knows anything about the other, and over the four-by-four catalogue the first alone spans a factor of sixty.

weaves · Shine A crepe's search has 4,416 winners and the surface separates them. All 5,040 rearrangements of the base this collection's crepe is built on, scored by how unevenly their crown line is spread over the repeat. 4,416 of them reach the correlation floor, which is the criterion the crepe was chosen by — so that criterion is not choosing, it is tying, and the search takes the first of a very large set. 28 of the rearrangements have a perfectly even surface, the bar at zero, and 16 of those are also at the correlation floor. The crepe actually drawn, marked, sits at 0.236 — the thirty-eighth percentile, better than most and not at the floor. The improvement is available, it costs nothing, and no criterion this collection had could see it.

A crepe is flat in its draft and not in its surface

A crepe weave is chosen by pushing the draft's correlations as flat as they will go. That criterion turns out to tie: on the base this collection uses, 4,416 of the 5,040 rearrangements reach the floor. Sixteen of them additionally spread their crown line perfectly evenly — and the crepe actually drawn is not one of the sixteen.

weaves · Texture weaves The four-by-four catalogue's crown line, counted three ways. Every one of the 22,874 interlacing four-by-four drafts, binned by how much horizontal crown line it carries, under three counts: both systems summed, which is what the published census reports; the warp alone; and the weft alone. A bearing curve sees one system, because a plate meets whichever crown stands higher and meets nothing else until it has sunk past the step between them. Under the summed count 2 drafts carry none; under the warp alone 494 do, and under the weft alone 494. What the histogram cannot show is which drafts moved, which is most of them.

The census counted two systems and a surface has one

Two drafts of twenty-two thousand touch at points, and the two are the plain weave. That is a count of the crown line both systems carry, and a bearing curve sees one: a plate meets whichever crown stands higher and meets nothing else until it has sunk past the step. Counted the way a surface is read, 494 drafts touch at points rather than two — and which 494 depends on a crimp division already called a convention rather than a measurement.

cloth · Surface The bearing crowns of 2/2 twill and 2/2 hopsack, over 3 repeats. The cells at which the warp is on the face, drawn over 3 repeats of each draft — which is the surface a plate meets, since the other system is a step below it. 2/2 twill has 1 component in its repeat and a path that runs the whole way across the cloth, in both directions; 2/2 hopsack has 2 components in its repeat and no path across the cloth at all. Both carry the same length of crown line by the bearing count, and one is a ridge while the other is a field of islands. What the drawing cannot show is the depth of the gaps between them, which is the step to the second system and is a few micrometres.

Four drafts in five have no path along their own crowns

A 2/2 twill and a 2/2 hopsack carry exactly the same length of bearing crown line, which the surface census noted and could not explain. One of them is a ridge running diagonally across the cloth without a break; the other is a field of square islands with no path between them. Counted over the whole catalogue, 4,016 of 22,874 drafts have a crown path that reaches the far side, 1,616 have one in both directions, and 130 have crowns with no neighbour at all.

cloth · Surface How many cloths any one cloth derives into. The 426 four-by-four cloths sorted into the orbits the manuals' derivations cut them into. 12 orbits hold 1 cloth; 83 orbits hold 2 cloths; 62 orbits hold 4 cloths. The largest orbit in the whole catalogue holds 4, so no cloth derives into more than 3 others by any sequence of the named operations, however long. The derivations generate a group of 256 elements and it cuts the catalogue into 157 pieces. What the bars cannot show is which cloths are in which orbit, which is the next figure.

No cloth derives into more than three others

Every weaving manual opens by saying the three basic weaves generate the rest. This collection counted the reach and found nine of 426, and left the nine as a count. It is not a count: every derivation the manuals name is a relabelling of the grid or a complementation of it, both invertible, so they generate a group — and that group cuts the 426 cloths into 157 closed pieces of which the largest holds four. The claim is not merely wrong about how much derivation reaches; derivation cannot reach more than four cloths from anywhere, by any sequence of operations, however long.

weaves · Derivation

Named alongside it

The objects these essays reach for when they reach for this one.

CensusCrown linePlateauBearing curveFloat lengthBalanceCounterchangeCriterionDerivationEnumerationOrbitSurface height

All concepts