Textile Structure
how cloth is put together
Concept

Relief — where it appears

A cloth standing out of its own plane, made either by a difference of crimp between regions or by feeding one warp faster than another. The surplus becomes an amplitude by a square root, so an order of magnitude in surplus is a factor of three in depth.

Named by 5 essays across 2 fields — each of them below, with the objects they name alongside it.

The step between a figure and its ground. Three figures on a plain ground, all in one sheeting's threads at its own setts. A thread presses on the thread it crosses only where it turns, and it turns at its interlacings — so the pressing a region receives per unit area is the contact force at one turn times the turns per unit area, and the second factor is a property of the matrix exactly. A five-end satin turns two fifths as often as a plain weave, is pressed two fifths as hard, flattens less, and stands 55 µm proud of it. What the rows cannot show is that both regions are given a plain weave's weave angle: a satin's crimp is genuinely smaller and its turns genuinely gentler, so the real step is larger than this, by an amount not computed here.

A figured cloth has a step in its surface

A damask is one cloth in one set of threads at one sett, and it is not flat. A thread presses on the thread it crosses only where it turns, so a region that turns less often is pressed less often, flattens less and stands thicker — and the step is a ratio of interlacing rates, read off the matrix with no yarn property in it.

pattern · Blocks A seersucker in section. A seersucker in section across four stripes, at a feed ratio of 1.30 — the slack warp let off 30 per cent faster than the tight one — over a 6.0 mm stripe. The surplus has nowhere to go in the plane, so it buckles, and the standard small-amplitude result gives 2.09 mm of rise, which is 4.2 times the cloth's own thickness of 0.500 mm. Nothing has to relax for this to appear: unlike a honeycomb, a seersucker comes off the loom already puckered, and washing deepens it rather than creating it. What the drawing cannot show is that the buckle's shape is an assumption — a sinusoid pinned at the stripe's edges — while its amplitude follows from the surplus and the half-wavelength alone.

A seersucker is made at the loom

Every other relief weave in this collection gets its shape after the loom, from a difference of crimp between two regions of a few per cent. A seersucker's surplus is thirty per cent and is put in as the cloth is woven — an order of magnitude more, which the square root turns into a factor of four in depth and no more than that.

weaves · Texture weaves A damask's figure and ground trade places when the cloth is turned. A satin 8 figure on a sateen 8 ground in sheeting — one cloth, one set of threads, one sett, and the ground is the figure's own complement. Their total specular areas are within a few per cent of one another, so neither is intrinsically the brighter. What differs is the direction: the figure's crowns run with the warp and the ground's with the weft. So the contrast between them is 2.0-to-one with the light coming from 8° and 0.47-to-one from 90° — it reverses, exactly, a quarter turn apart. That is what makes a damask visible in one colour, and it is not the step in its surface: the step is fifty micrometres and returns no light at all under a diffuse illumination, while this contrast is a factor of 2.0 and is present whenever there is a direction in the light.

A figure shows by its shine, not its step

A damask is one cloth in one colour and its pattern is plainly visible. This collection attributed that to the step in its surface — fifty micrometres of relief, computed from the interlacing rates. The step is real and returns almost no light. What makes the figure visible is that its crowns run at right angles to the ground's, so the two trade places when the cloth is turned.

pattern · Blocks A crepe's search has 4,416 winners and the surface separates them. All 5,040 rearrangements of the base this collection's crepe is built on, scored by how unevenly their crown line is spread over the repeat. 4,416 of them reach the correlation floor, which is the criterion the crepe was chosen by — so that criterion is not choosing, it is tying, and the search takes the first of a very large set. 28 of the rearrangements have a perfectly even surface, the bar at zero, and 16 of those are also at the correlation floor. The crepe actually drawn, marked, sits at 0.236 — the thirty-eighth percentile, better than most and not at the floor. The improvement is available, it costs nothing, and no criterion this collection had could see it.

A crepe is flat in its draft and not in its surface

A crepe weave is chosen by pushing the draft's correlations as flat as they will go. That criterion turns out to tie: on the base this collection uses, 4,416 of the 5,040 rearrangements reach the floor. Sixteen of them additionally spread their crown line perfectly evenly — and the crepe actually drawn is not one of the sixteen.

weaves · Texture weaves A warp rib's cord, at doublings of 2 and 4. One warp end drawn in section along the cloth, over the pick groups of a warp rib, at doublings of 2 and 4 and at one scale. The cord's crests are the pick groups and its two dimensions come from different places. The height is the weft's own crimp amplitude and Peirce's closure condition caps it at the two yarn diameters together — 500 µm here — so it runs 304 µm at a doubling of 2 and 361 at 4, which is 61 and 72 per cent of the ceiling. The pitch is the doubling times the pick spacing and has no ceiling at all. So a larger doubling gives a taller cord and a wider one, and wider faster: the aspect falls from 0.40 to 0.29. What the section cannot show is what a finish does, which flattens the cord without changing either the pitch or the ceiling.

A cord's height has a ceiling and its width has none

A warp rib's cord is a wave, and its two dimensions come from two different places. The height is the weft's own crimp amplitude, and Peirce's closure condition caps it at the two yarn diameters together — 500 µm for a quarter-millimetre yarn, of which a 2/2 rib reaches 304 and a 6/6 rib 391. The pitch is the doubling times the pick spacing and has no cap at all. So a bolder rib is taller and wider, and wider faster: the aspect falls from 0.41 to 0.22.

weaves · Rib weaves

Named alongside it

The objects these essays reach for when they reach for this one.

CrimpCrown lineDamaskFigure and groundSurface heightBeamBlockBlock figureBucklingCatalogueCensusCloth thickness

All concepts