Block figure — where it appears
Named by 8 essays across 2 fields — each of them below, with the objects they name alongside it.
A figure is not a stripe
Two sound weaves side by side always make sound cloth — that is a theorem, and it was proved here. Put one of them inside a *region* instead of a band and it stops being true, and whether it is true or not turns out to depend on a number that appears nowhere in either draft: where the two weaves start relative to each other.
What a figure costs the loom
A block design's shaft count does not depend on how wide the figure is, or how deep, or how many blocks it has. It depends on how many *different* block-columns it has, and each new one costs exactly one repeat of the ground weave — 8 shafts, then 16, then 24, in a straight line with no slope to fit.
A woven outline is a staircase
A jacquard's resolution is quoted as its hook count, and on a 1,200-hook machine 140 cm wide that is a step of 1.17 mm. The cloth cannot use it. A figure's smallest feature is one repeat of the ground weave, which on an eight-end satin is 3.33 mm — so the machine resolves nearly three times finer than the fabric can hold, and a finer machine buys nothing at all.
A figure is harder on its warp
Every basic weave flexes all its ends exactly as often as each other — plain, twill, satin and sateen alike, and it is a one-line theorem. Figure one of them on another and that evenness goes, or does not, depending on where the ground weave was started relative to the figure. The same invisible offset that decides whether a fine figure holds together decides, at a coarse one, how unevenly the loom works the warp.
A rectangular block is not half a rule
The block rule was proved for square blocks and the rectangular case was recorded as not run, on the grounds that a block a repeat wide and half a repeat deep satisfies only half the condition. Running it turns up two things: half the condition rules out the failure nobody can see, and a block turned through a right angle is a different design — which a square census cannot notice, because a square block is its own transpose.
What else the relative origin decides
Where two weaves start relative to each other decides whether the cloth holds together, and it has a second consequence beside that. Two is what a search finds when it looks twice. Sweeping every origin against every measure of the cloth turns up a third — the longest float, which is the one property a weaver actually looks at — and turns up an earlier figure caption that says the opposite.
A figure shows by its shine, not its step
A damask is one cloth in one colour and its pattern is plainly visible. This collection attributed that to the step in its surface — fifty micrometres of relief, computed from the interlacing rates. The step is real and returns almost no light. What makes the figure visible is that its crowns run at right angles to the ground's, so the two trade places when the cloth is turned.
A turned block is a moved origin
An eight-end satin figured on a 2/2 twill fails on 55,536 profiles at a block eight picks by two ends and on none at two by eight, and that was read as a property of the block's shape. Sweep the relative origin as well and the two shapes trade places: at every one of the sixteen origins exactly one of them fails, and over the sixteen they fail equally often. A shape asymmetry that no origin removes exists, and it needs a satin whose move squared is not one.
Named alongside it
The objects these essays reach for when they reach for this one.
DamaskProfile draftCloth integrityFigure and groundRelative originRepeatCensusConnectivityFloatLoose endPoint paperInterlacing