Textile Structure
how cloth is put together
Concept

Relative origin — where it appears

Where one weave starts against another in a cloth containing both, which is a real quantity that point paper does not record. It decides whether a figured cloth holds together and how far its boundary shows, and no drawing on point paper records it.

Named by 5 essays across 2 fields — each of them below, with the objects they name alongside it.

8-end satin figured on 8-end sateen. A 3 by 3 block profile, drawn above at one square per block, and the cloth it produces below at one square per intersection. The figure weave is 8-end satin and the ground is 8-end sateen, both single cloths on their own; each block is 8 ends and 8 picks. The composite is 1 cloth, with a longest float of 8 and 0 threads lying loose, all counted from the matrix that drew the picture.

A figure is not a stripe

Two sound weaves side by side always make sound cloth — that is a theorem, and it was proved here. Put one of them inside a *region* instead of a band and it stops being true, and whether it is true or not turns out to depend on a number that appears nowhere in either draft: where the two weaves start relative to each other.

pattern · Blocks Flexes per end in the same check, ground a pick along. One bar per warp end above the draft of the same check, ground a pick along, each the number of times that end changes sides in one repeat — which is the number of times the shed drags it through its heddle eye. The counts run from 6 to 10, and they are the same numbers that give the cloth its interlacing rate of 0.500 per intersection.

A figure is harder on its warp

Every basic weave flexes all its ends exactly as often as each other — plain, twill, satin and sateen alike, and it is a one-line theorem. Figure one of them on another and that evenness goes, or does not, depending on where the ground weave was started relative to the figure. The same invisible offset that decides whether a fine figure holds together decides, at a coarse one, how unevenly the loom works the warp.

mechanics · Shed Everything the relative origin decides. Each of six quantities computed from a weave matrix, swept over all 64 relative origins of 8-end satin figured on 8-end sateen. A quantity that takes one value across the sweep is a gauge freedom of the pair; one that takes several is something a designer chooses without knowing it. longest float takes 2 values; interlacing rate takes 2 values; weft-face fraction takes 3 values. The origins fall into 3 different partitions, so the moving quantities are not all decided by the same number. What the table cannot show is the census over all 65,536 profiles, which is a seventh column, and the one that showed the origin decides whether the cloth holds together.

What else the relative origin decides

Where two weaves start relative to each other decides whether the cloth holds together, and it has a second consequence beside that. Two is what a search finds when it looks twice. Sweeping every origin against every measure of the cloth turns up a third — the longest float, which is the one property a weaver actually looks at — and turns up an earlier figure caption that says the opposite.

pattern · Blocks The warp floats across a tone edge on 8 ends. 2 strips of point paper, each one repeat of a tone on either side of a straight edge between picks, with the edge ruled and every warp float of the greatest length that crosses it drawn along its thread. Ground the exact complement: tones of 7 and 1 marks per end (cosets 1 to 7 against coset 0), not nested, and the longest warp float across the edge is 8 against 7 inside either tone. Ground one pick along: tones of 1 and 7 marks per end (coset 1 against cosets 1 to 7), nested, and the longest warp float across the edge is 7 against 7 inside either tone. A float drawn in the warning colour is longer than anything either tone has on its own. What the strips cannot show is the cloth: the edge here is one intersection wide, and in a woven piece the two tones take up yarn differently, so the change is spread over threads that point paper draws as belonging wholly to one side or the other.

A damask's edge floats further than its figure

Figure and ground in a damask carry the same longest float, which is true of both areas and false along the line between them. A float can cross the edge where two tones meet, and when one tone's marks lie inside the other's it can never be longer than a float either tone already has. A damask built as an exact complement is the one place in n that its ground can start which breaks this, and it floats n picks at its edge against n − 1 inside.

pattern · Shading 8×2 and 2×8 over every origin. Two grids of the 16 relative origins of 2/2 twill under 8-end satin, the row being how many picks the ground is started along and the column how many ends. The left grid is the census at a block 8×2, the right at 2×8; a square is filled where some of the 65,536 profiles separate. 8×2 fails at 8 origins and 2×8 at 8; both fail at 0 and neither at 0. Turning the cloth over and through a right angle sends each origin to another, and the letters mark where: every letter lands on a square with the same answer, so the two shapes are one census read at relabelled origins.

A turned block is a moved origin

An eight-end satin figured on a 2/2 twill fails on 55,536 profiles at a block eight picks by two ends and on none at two by eight, and that was read as a property of the block's shape. Sweep the relative origin as well and the two shapes trade places: at every one of the sixteen origins exactly one of them fails, and over the sixteen they fail equally often. A shape asymmetry that no origin removes exists, and it needs a satin whose move squared is not one.

pattern · Blocks

Named alongside it

The objects these essays reach for when they reach for this one.

Block figureCensusCloth integrityDamaskFloatConnectivityFigure and groundInterlacingLoose endPoint paperProfile draftSatin

All concepts