Textile Structure
how cloth is put together
Concept

Point paper — where it appears

Squared paper on which a weave is written, one square to each intersection, filled where the warp is on the face. It records the interlacement exactly and records nothing else, so two cloths with the same drawing can differ in thickness, thread and origin.

Named by 21 essays across 5 fields — each of them below, with the objects they name alongside it.

The 2/2 twill. The 2/2 twill on point paper, a filled square meaning the warp is on the face. Its longest float, its interlacing count and the number of separable cloths it describes were all counted from the matrix that drew it.

The draft is a matrix

Point paper is not a diagram of cloth. It is a grid of yes-or-no decisions about which threads to lift, which makes a weave a binary matrix and almost every question about it arithmetic.

cloth · What cloth is 2/2 twill: written at 4×4, repeating on 4. On the left the draft as written, with the smallest rectangle that tiles it outlined. On the right the same draft with every translation that leaves it unchanged marked from the top left corner: there are 4 of them, so a fundamental domain holds 4 intersections rather than the 16 the rectangle claims and the 16 the point paper carries. Nothing in the drawing on the left says so.

What a repeat repeats

Point paper is ruled in squares, and the rectangle a draft is written on is a decision by whoever drew it. The unit a cloth actually has is smaller — two intersections for a plain weave, four for a 2/2 twill — and it is not a rectangle at all.

cloth · Repeat 3 cloths on 6 ends. A repeat of 6 ends and 6 picks holding 3 complete cloths, each with 2 ends and 2 picks of its own. The bars beside the strands say which cloth each belongs to; the ceiling at this size is 3, and the longest float is 5 because the face warp passes over every pick below it.

How many layers a draft can have

Of the 22,874 four-by-four drafts this site sweeps, 22,730 are one cloth and 144 are two. None is three, and none can be — a repeat of n ends holds at most n halved cloths, because every cloth needs two ends and two picks of its own before it interlaces at all.

cloth · Integrity A stripe of a satin stripe on a plain ground. a satin stripe on a plain ground, written as one draft of 8 picks and 20 ends. Each band is generated from its own rule and the whole matrix is measured as one: 10 shafts, which is the number of distinct columns in the union of the two bands, against 8 if every column were shared and 10 if none were. The bands have 0 columns in common.

A stripe is a partition of the warp

A striped cloth is not a weave with decoration on it — it is one matrix in which different bands of ends obey different rules. The shaft count is a set union rather than a sum, and of forty-five pairs of standard weaves only three share a single column.

pattern · Stripe What four notations can say. Four ways of writing a weave down, with how many of the 426 four-by-four cloths each can express and whether expressing one identifies it: point paper, 426, identifies; a four-part draft on 3 shafts and 4 treadles, 110, identifies; a fraction name, 5, does not identify; a longest-float specification, 426, does not identify. A longest-float specification names every cloth and separates them into only 3 classes.

Four ways to write a weave down

A weave's name in the trade is a pair of numbers — 2/2, 3/1, five-end satin — and the notation is so universal that it is easy to forget it is a notation. It has an image and the image is computable: of the 426 cloths at four by four, five have a name of that kind, and there are four names for the five.

cloth · Notation 8-end satin figured on 8-end sateen. A 3 by 3 block profile, drawn above at one square per block, and the cloth it produces below at one square per intersection. The figure weave is 8-end satin and the ground is 8-end sateen, both single cloths on their own; each block is 8 ends and 8 picks. The composite is 1 cloth, with a longest float of 8 and 0 threads lying loose, all counted from the matrix that drew the picture.

A figure is not a stripe

Two sound weaves side by side always make sound cloth — that is a theorem, and it was proved here. Put one of them inside a *region* instead of a band and it stops being true, and whether it is true or not turns out to depend on a number that appears nowhere in either draft: where the two weaves start relative to each other.

pattern · Blocks What a raising machine can catch in a 2/2 twill. The draft with every weft float long enough for a raising wire to lift marked on it. The teeth need an unsupported length of thread on the surface, so a cloth in which every thread is bound at every crossing offers them nothing at all — which is why a napped fabric is always a twill or a satin and never a plain weave.

Only a float can be raised

A raising machine drags wire teeth across a cloth and pulls fibre ends up into a nap. The teeth need something to catch, and what they catch is a float — so which fabrics can be napped at all is a question about the matrix, decidable exactly, and the answer over the whole four-by-four census is two.

finishing · Nap Float lengths in a honeycomb. The same draft twice. On the left, filled where the warp is on the face — which is all point paper says. On the right, every intersection shaded by the length of the float it belongs to, from one at the palest to 6 at the strongest. The gradient on the right is the whole mechanism of a relief weave and it is invisible on the left.

A honeycomb gets its cells in the wash

The obvious mechanism is take-up on the loom, and the arithmetic says it is wrong: every end of a diamond passes through the long floats and the tight ones alike. What is left is finishing, and a cell is a region that wanted to shrink less than the cloth around it.

weaves · Texture weaves The block condition, one half at a time. Every block shape from 8×8 down, for 8-end satin figured on 8-end sateen, each an exhaustive census of all 65,536 four-by-four profiles. The bar is split: the dark part is figures that separate with a thread left loose on the face, and the light part is figures that separate with nothing visible wrong. Shapes satisfying the block condition in one direction only are marked, and none of them has a light part at all. What the chart cannot show is why: the census is exhaustive and the theorem behind it is not proved here.

A rectangular block is not half a rule

The block rule was proved for square blocks and the rectangular case was recorded as not run, on the grounds that a block a repeat wide and half a repeat deep satisfies only half the condition. Running it turns up two things: half the condition rules out the failure nobody can see, and a block turned through a right angle is a different design — which a square census cannot notice, because a square block is its own transpose.

pattern · Blocks A tube. A two-layer fabric 6 ends wide in each layer, with the weft's path drawn across the section below the draft. 1 piece of cloth, 0 free selvedges, 1 shuttle, and a developed width of 12 ends however the edges are joined. The connectivity of the infinite repeat is 2 for this draft and cannot tell this construction from the others.

A tube and two cloths are the same draft

Two separate fabrics, a cloth twice the width of the loom and a seamless tube are the same draft to the last square. The check this site is built on reports two layers for all three and is right every time — because the thing that separates them is four free selvedges, or two, or none, and a repeat has no selvedges in it.

fancy · Double cloth Everything the relative origin decides. Each of six quantities computed from a weave matrix, swept over all 64 relative origins of 8-end satin figured on 8-end sateen. A quantity that takes one value across the sweep is a gauge freedom of the pair; one that takes several is something a designer chooses without knowing it. longest float takes 2 values; interlacing rate takes 2 values; weft-face fraction takes 3 values. The origins fall into 3 different partitions, so the moving quantities are not all decided by the same number. What the table cannot show is the census over all 65,536 profiles, which is a seventh column, and the one that showed the origin decides whether the cloth holds together.

What else the relative origin decides

Where two weaves start relative to each other decides whether the cloth holds together, and it has a second consequence beside that. Two is what a search finds when it looks twice. Sweeping every origin against every measure of the cloth turns up a third — the longest float, which is the one property a weaver actually looks at — and turns up an earlier figure caption that says the opposite.

pattern · Blocks A 40-by-40 motif on a poplin, drawn and finished. A motif 40 ends wide and 40 picks tall, at the setts the reed and the take-up were set to, and the same motif measured on the finished cloth. Point paper has one cell per end and per pick, so a motif's proportions are the ratio of the two setts — and both setts move in the finishing, in opposite directions. On the poplin the aspect changes by a factor of 0.8429, so a circle drawn as a circle at the loom's numbers comes back 15.7% out of round and a designer who wants a circle must draw an ellipse of 1.1863. What the drawing cannot show is that the correction is not a property of the design: it belongs to the cloth, so the same card woven on a different construction is a different shape.

A motif is drawn at the wrong shape on purpose

Point paper has one cell per end and per pick, so a design's proportions on the cloth are the ratio of the two setts. Both setts move in the finishing and they move in opposite directions, so a circle drawn as a circle comes back out of round — by three per cent on a balanced cloth and by sixteen on a warp-dense one.

pattern · Pattern What combination adds to the manuals' reach. The three counts. The manuals' own operations on their own seeds reach 9 of the 426 four-by-four cloths. Admitting stripes, checks and figures of any two seeds — 17,787 constructions, of which 177 repeat inside four ends and four picks — takes it to 28, a gain of 19. That is a threefold rise and it leaves 398 cloths unreached, which is 93.4 per cent of the catalogue. What the chart cannot show is combinations of combinations, which are excluded on purpose: the closure's seeds have to be what a chapter actually teaches or the count measures something else.

What combining two weaves reaches

The account before it found that the manuals' own operations on their own basic weaves reach nine of the 426 four-by-four cloths, and recorded one exclusion honestly: combination — striping, checking and figuring — was left out, because a combination of two four-end weaves is eight ends wide and so is not a four-by-four cloth at all. Admitting it triples the reach and leaves ninety-three per cent of the catalogue outside.

weaves · Derivation The 6-end satin. The 6-end satin on point paper, drawn over 2 repeats with its marks joined in reading order inside the first. The joining segments are not parallel and not equal, because there is no number of picks the mark advances by at every end. That is what irregular means, and it is not visible in the squares alone. At this order there is one distinct satin and none is regular. The longest float is 1 in the warp and 5 in the weft, and the cloth is one cloth. What the drawing cannot show is that this is the only one: that is a statement about 36 arrangements and is made by the enumeration.

The six-end satin that does exist

There is no six-end satin, and this collection proved it in its founding essays. The proof is about satins with a move number. Drop that word — keep one mark per end and no two marks touching — and six ends has exactly one satin, unique up to where the repeat is started, and four ends still has none at all.

weaves · Satin A 3-pick fold across a 8-end satin, move 3. A 8-end satin, move 3 on point paper with a fold 3 picks wide drawn across it at pick 3. A warp end's crimp is made where it turns from over to under, and the dots mark the turns that fall inside the fold. Averaged over the ends there are 0.75 of them, and 4 of the 8 ends in the repeat have none at all — those ends are marked with a line, and each of them crosses the fold dead straight with no crimp to give up. Over every fold position, 50.0% of end-and-place pairs are like that. What the drawing cannot show is what happens to those ends instead, which is that the whole of the fold's length difference goes into their fibres.

How sharply a weave lets a cloth fold

A fold's length difference is paid for out of crimp, and crimp is not spread evenly along a thread — it is made at the interlacings and nowhere else. So what a fold has to spend is not the weave's average crimp but whatever is inside the few picks the fold crosses, and in an eight-end satin half the warp ends have nothing there at all.

weaves · Float A two-layer interchange, 1 block by 2. A two-layer cloth whose layers change places from block to block, drawn as the draft and as the section a weaver would draw. Each block is one repeat of the stack, 4 picks by 4 ends, and the design has 2 boundaries in it. Every strand in the draft is coloured by the cloth this site's criterion puts it in, and there is one colour, because there is one cloth — with no intersection reversed anywhere in the repeat. A stitch joins two layers at a point; an interchange joins them along a line, and the line is the design's own block boundary rather than anything added to it. The section below is schematic: it draws each ply as a line rather than as its threads, because what has to be seen is that the two lines cross, and a section at thread level over 2 blocks is a picture nobody can count.

An interchange joins what a stitch would have had to

The rung below spent a whole essay on where a stitch may be put in a double cloth, and found face weaves with nowhere to put one at all. A design in which the two layers change places from block to block needs no stitch anywhere: the boundary is the join. Two blocks side by side make one cloth with not a single intersection reversed, and the same two blocks with no boundary between them make two.

fancy · Double cloth A warp pinstripe in a 2/2 twill, 1, 2, 3 threads wide. A light stripe of ends in a dark 2/2 twill, drawn as the face a reader sees at 1, 2, 3 threads wide over 3 repeats. A single stripe thread is on the face at 50% of the crossings and goes under for up to 2 at a time, so it draws a broken line. Adjacent threads of the same colour cover one another's gaps, and the line becomes unbroken at 3 — the fewest neighbours for which, at every crossing, at least one is on the face — though an unbroken line is not a solid one, and beneath each panel is how much of its width is light, which varies along it until the line is a whole repeat wide. What the drawing cannot show is distance: a broken line whose gaps are a fraction of a millimetre reads as a fainter unbroken one from arm's length, and how far that is depends on the sett and on the eye.

No weave draws an unbroken line one thread wide

A pinstripe is drawn on point paper as a single coloured column, and in cloth a single end is on the face only where it is up — so in every weave that interlaces, a line one thread wide has gaps in it. Neighbours of the same colour fill each other's gaps, and the fewest that leave no gap is a property of the weave: two in a plain weave, three in a 2/2 twill, and in a warp-faced sateen two across the warp and eight across the weft. Unbroken is not solid either — an eight-pick bar in that sateen has no gap and is an eighth light.

pattern · Stripe A repeat across a 1800-end warp. Four repeat widths laid across the same 1800-end warp, drawn at the warp's own scale. The pale bands at the two ends are the selvedge threading, 24 ends each, which weaves its own firmer weave and is not part of the design. Between them the body is ruled into whole repeats, alternating so they can be counted, and the marked bands at the two sides are the remainder — the part of a repeat that did not fit, split between the two selvedges because the trade centres the pattern. None of these four repeats divides the body exactly, and the leftovers run from 2 to 24 ends. What the drawing cannot show is what the break looks like: a quarter of a repeat at the selvedge reads as a border and half of one reads as a mistake, and where the line between those falls is a judgement.

A repeat has to fit the width

A repeat tiles the plane and a warp has two edges, so somewhere between them a repeat is cut through. The set of repeat widths that divide a warp exactly is the set of divisors of its body, and a body of a few thousand ends has a few dozen — two to eight per cent of the candidates. So a designer choosing a repeat for any reason except the width chooses one that does not fit, and the leftover averages half a repeat, split between the two selvedges.

cloth · Repeat What a profile draft can reach at 4 by 4. The share of the 22,874 interlacing 4-by-4 drafts that a profile draft can express, at two block sizes. A profile is a grid of blocks each carrying a figure weave or a ground weave, so its image is every draft reachable by any choice of the two weaves and any assignment — which is enumerated here rather than argued: 4,096 combinations at the larger block, and the distinct results counted. With two-by-two blocks it reaches 306 drafts, which is 1.34 per cent. With one-by-one blocks the profile is the draft and it reaches all of them, which is the control. What the bars cannot show is that the reachable drafts are the useful ones: every figured cloth ever woven is in the small set, and the notation is narrow because designs are.

A profile draft is a notation whose alphabet is weaves

The rung below measured four notations for a single weave and left open the notations for something larger. A profile draft is the first of them: a grid of blocks, each carrying a figure weave or a ground weave. Its image is enumerable and it is tiny — every pair of two-by-two weaves against every assignment of two-by-two blocks reaches 306 of the 22,874 interlacing four-by-four drafts, which is 1.34 per cent. And the 306 are the ones anybody weaves.

cloth · Notation The draft for 2/2 twill, as a loom holds it. The 2/2 twill written the way a weaver writes it: the threading above, saying which shaft each end hangs on; the lifting plan to the right, saying which shafts rise on each pick; and the cloth below, which is not copied from the weave but produced by running those two against one another and then checked against it.

A lifting plan says nothing without a threading

The second of the notations for something larger than a weave is a pair, not a notation: a threading and a lifting plan, and neither alone expresses anything. The pair's image is exactly the drafts with no more distinct columns than there are shafts — 98 at two shafts, 5,282 at three, all 22,874 at four — and it is not nested with the profile draft's in either direction. The profile reaches 192 drafts that need all four shafts, and misses 64 of the 98 a two-shaft loom weaves.

cloth · Notation The edge of a warp line in a 2/2 twill, at 3 and 4 threads. A light line in a dark 2/2 twill, drawn at 3 and 4 threads wide over 3 repeats with both of its boundaries traced crossing by crossing. The line has no gap at either width, and neither boundary is straight: at the crossings where the outermost thread of the band is under the ground, the edge retreats to the next thread in. At 3 it swings 2 threads with a period of 4; At 4 it swings 2 threads with a period of 4. What the drawing cannot show is distance, at which a swing of one thread width is below what an eye separates and a swing of three may not be.

An unbroken line is not a clean one

A line of colour has two boundaries and neither is straight, in any weave there is. The thread at the edge must go under somewhere, and where it does the edge retreats to its neighbour — so the boundary steps, and by exactly one thread less than the narrowest unbroken line the weave draws. Over 22,874 drafts there are three widths and three swings and no draft anywhere else, and widening the line past its narrowest unbroken width leaves the edge precisely where it was.

pattern · Stripe

Named alongside it

The objects these essays reach for when they reach for this one.

FloatRepeatCensusCloth integrityConnectivitySatinStripeInterlacingNotationBlock figureDouble clothEnumeration

All concepts