Textile Structure
how cloth is put together
Concept

Cloth integrity — where it appears

Whether a draft describes one fabric rather than several lying on each other, decided from its above-and-below relation. The test is exact and it has no tolerance, which is what makes it different from every other property a draft can be asked about.

Named by 43 essays across 7 fields — each of them below, with the objects they name alongside it.

Whether the cloth is one cloth. Two drafts. Both interlace everywhere, both have short floats, and both look like perfectly ordinary weaves. One is a single fabric and the other is two fabrics lying on each other, and the bars beside each strand say which layer it belongs to.

Does it hang together

A draft can interlace everywhere, have short floats, and describe two fabrics lying on each other rather than one. Nothing about the drawing says so, and the test that does is exact.

cloth · Integrity The plait braid. A braid written as a word of crossings and drawn from it. Each strand is coloured by the component of the above-and-below relation it belongs to, so a word describing two independent braids rather than one shows as two colours. This one is 1 braid.

Braids and the third thread system

A braid is one set of strands interlacing with itself at an angle, so the question of whether it holds together is the same question a weave answers — and most crossing sequences answer it badly.

cloth · Integrity A preform through its thickness, and whether it is one piece. An orthogonal three-dimensional preform in section, with the binder's path, beside the digraph the integrity criterion consumes: one node per level, an arrow from each level to the one above it, and the binder's own contacts. The warp and weft here are straight and do not interlace at all, so the whole of the connectivity is the binder — and the count of separable pieces is what the criterion returns, unchanged from the weave it was written for.

The third index is not a repeat

The fancy weaves left three-dimensional weaving open as a possible fifth escape from the binary matrix. It is not one. The criterion that decides whether a plain weave is one cloth decides a five-layer preform unchanged — and what a third dimension actually takes away is periodicity, because a thickness has a top and a bottom and a repeat does not.

applied · What cloth is The tricot lapping. A warp-knit lapping drawn from the guide bar's movement. Each thread is coloured by the group of wales it belongs to, so a lapping that leaves the wales independent shows as several colours. This one joins them into 1 group.

Warp knitting, which is a different thing entirely

Every wale has its own thread, and if the thread never leaves its wale the fabric is a set of independent cords. Whether a lapping makes cloth is decided by a coprimality condition — the satin theorem, in a knit.

knits · Warp knit The 5-end satin. The 5-end satin on point paper, a filled square meaning the warp is on the face. Its longest float, its interlacing count and the number of separable cloths it describes were all counted from the matrix that drew it.

What the matrix cannot say

A weave is a binary matrix, and the whole of this collection rests on it. So it is worth setting down, in one place and precisely, what that encoding decides exactly, what it decides while appearing to decide something else, and the four quite different reasons a real fabric can fall outside it altogether.

cloth · What cloth is A web at 6 fibre lengths squared per unit area. Straight fibres dropped at random positions and random angles. The largest connected group is drawn solid; everything not joined to it is drawn faintly. Whether that group reaches both edges is what decides whether this is a sheet or a heap.

Nonwovens, and what holds them together instead

A web of fibres laid down at random has no repeat, so the exact test for whether a fabric holds together has nothing to work on. What replaces it is a threshold, and the threshold is sharp.

cloth · Integrity How often a draft falls apart. Every four-by-four draft in which each end and each pick interlaces at least once, sorted by its longest float, with the fraction that describe more than one cloth. The counts are produced by running the enumeration rather than by recalling it.

Every cloth there is, at four by four

Sixty-five thousand matrices, twenty-two thousand weaves, and about a dozen with names. The complete census of the smallest interesting repeat is a map of a whole small world, and almost none of it has ever been woven.

cloth · What cloth is How many four-by-four weaves there are. The same census counted four ways. A draft is a notation; shifting the repeat's origin, turning the cloth over and turning it end for end all change the matrix and not the fabric. Each bar is the number of distinct objects left once those identifications are made, counted by canonical form and checked against Burnside's lemma.

How many cloths are there

Twenty-two thousand eight hundred and seventy-four four-by-four drafts. Four hundred and twenty-six four-by-four cloths. And the site's own separation rate — the fraction of drafts that look like fabric and are not — more than doubles when fabrics are counted instead of notations, which is the opposite of what was expected.

pattern · Pattern A V-fastened tuft. A cut pile bound into its ground by V fastening, drawn in section. The pile end passes beneath 3 of the 6 ground picks and wraps 1 half-turn around them in all. The integrity criterion says the tuft is attached; how hard it is held is a different question with a different model behind it.

Pile is a third thread system

Velvet, corduroy, plush and carpet all carry threads that are not woven into the ground in the ordinary sense. Two of the three systems make a perfectly good matrix and the third is not in it — so the encoding this whole site rests on has nothing to say about the part of the fabric a hand actually touches.

fancy · Pile What a tuft's wrap is worth at μ = 0.3. The two classical ways of binding a cut pile into its ground, with the holding force each provides as a multiple of the tension applied to the free end. The model is the capstan equation and the friction coefficient is measured rather than derived, so the ratio between the two matters and neither absolute number should be quoted alone.

How a tuft is held

A V-fastened tuft and a W-fastened tuft are both attached, and the integrity criterion returns the same verdict for both. One of them is specified for hotel corridors and the other sheds. What separates them is not a topological property at all — it is an angle, and it needs a coefficient somebody has to measure.

fancy · Pile A double cloth. Two complete fabrics woven in one repeat, and what happens when a single intersection is turned over. The layer count beside the draft is computed from the matrix drawn, and the census below it is every single-square change tried in turn.

Backed and stitched constructions

A double cloth is two fabrics woven at once, and the check that verifies it says exactly two. Turn one intersection over and it says one — which means one mistake is enough to destroy the construction, and the enumeration says half of them would do it.

weaves · Integrity 3 cloths on 6 ends. A repeat of 6 ends and 6 picks holding 3 complete cloths, each with 2 ends and 2 picks of its own. The bars beside the strands say which cloth each belongs to; the ceiling at this size is 3, and the longest float is 5 because the face warp passes over every pick below it.

How many layers a draft can have

Of the 22,874 four-by-four drafts this site sweeps, 22,730 are one cloth and 144 are two. None is three, and none can be — a repeat of n ends holds at most n halved cloths, because every cloth needs two ends and two picks of its own before it interlaces at all.

cloth · Integrity A stripe of a satin stripe on a plain ground. a satin stripe on a plain ground, written as one draft of 8 picks and 20 ends. Each band is generated from its own rule and the whole matrix is measured as one: 10 shafts, which is the number of distinct columns in the union of the two bands, against 8 if every column were shared and 10 if none were. The bands have 0 columns in common.

A stripe is a partition of the warp

A striped cloth is not a weave with decoration on it — it is one matrix in which different bands of ends obey different rules. The shaft count is a set union rather than a sum, and of forty-five pairs of standard weaves only three share a single column.

pattern · Stripe The force at a crossing. One warp end of a sheeting riding over three picks, with the weave angle Peirce's geometry solves for at that construction: 36.8°. An end held at 0.50 N presses each pick it crosses with 0.599 N, which is twice the tension times the sine of the angle and has no material constant in it. What the drawing cannot show is the relaxed case: a cloth with no tension in it still holds its threads together, and what does the holding then is the yarn's own resistance to being bent, which needs an elastica this site does not have.

Every crossing is a force

A thread arrives at a crossing at an angle and leaves at its negative, so the two pulls have transverse parts that add. The force pressing one thread onto another is twice the tension times the sine of the weave angle — and for an ordinary sheeting that is more than the tension in the thread itself.

cloth · Contact One cloth, before the knife. Double plush: two ground cloths woven face to face with a pile warp shuttling between them. Uncut, the pile is the only thing either ground touches the other through, and the integrity criterion says one cloth. Cut down the middle, every pile end is severed and the same criterion says two. The whole manufacture is the deliberate destruction of an integrity the criterion otherwise exists to confirm.

Velvet is cut apart

Two ground cloths are woven face to face with a pile warp shuttling between them, and while it does the whole thing is one cloth — the criterion says so, and the pile is the only reason it is true. Then a knife runs down the middle and the same criterion says two. The manufacture is the deliberate destruction of cloth integrity.

fancy · Pile 8-end satin figured on 8-end sateen. A 3 by 3 block profile, drawn above at one square per block, and the cloth it produces below at one square per intersection. The figure weave is 8-end satin and the ground is 8-end sateen, both single cloths on their own; each block is 8 ends and 8 picks. The composite is 1 cloth, with a longest float of 8 and 0 threads lying loose, all counted from the matrix that drew the picture.

A figure is not a stripe

Two sound weaves side by side always make sound cloth — that is a theorem, and it was proved here. Put one of them inside a *region* instead of a band and it stops being true, and whether it is true or not turns out to depend on a number that appears nowhere in either draft: where the two weaves start relative to each other.

pattern · Blocks Where a thread stops sliding and starts breaking. A pick of sheeting gripped over a length of cloth, drawn one crossing at a time. The resistance is 0.30 times the 0.599 N each crossing presses with, so it rises with the length held; the breaking load of 3.74 N does not. The two are equal at 7.4 mm. What the drawing cannot show is that μ is a range rather than a constant, so the mark is a band and its position is exactly inversely proportional to the friction.

A thread is held one crossing at a time

Grip a thread over a length of cloth and its resistance to being pulled out rises with that length, because it is held at every crossing it makes. Its own breaking load does not rise at all. The two curves cross, and the length at which they cross turns out to be a seam allowance, a frayed edge and a tuft's anchorage — three rules of thumb with one number under them.

cloth · Contact A leno and the open plain weave it is not. Two warp ends and the picks they hold. On the left the doup end passes under its partner between picks and comes up the other side; on the right it never crosses, which is an open plain weave at the same sett. The layer count under each panel is computed by the same criterion that decides every other draft, and it returns the same verdict for both.

Leno is not a matrix

A doup end crosses under its partner between picks and comes up on the other side, so the end at position three on pick two is a different end on pick three. The entry W[i][j] does not name anything. The encoding is not wrong about leno; it is undefined for it.

fancy · Leno tubular, as a graph of its wales. Every wale of tubular as a node — 2 on the front bed and 2 on the back — with one chain per course joining everything that course takes yarn on, because a course is one traverse of one yarn. The nodes are filled by which component they fall into. This structure comes out as 2 fabrics: F0+F1 and B0+B1. The same answer is obtained a second way, by walking every partition of the wales and asking whether any course straddles it, and the two are required to agree.

Does a double jersey hang together

Two beds knitting with nothing passing between them are two fabrics that happen to have been made at once. Of 6,561 two-bed arrays, 1,135 are fabrics and 50 of those are two fabrics — and 28 of the 50 split across the beds rather than along them, so neither half is a layer.

knits · Two-bed The draft for 2/2 twill, as a loom holds it. The 2/2 twill written the way a weaver writes it: the threading above, saying which shaft each end hangs on; the lifting plan to the right, saying which shafts rise on each pick; and the cloth below, which is not copied from the weave but produced by running those two against one another and then checked against it.

How many shafts a draft needs

Every quantity this site has counted so far is a property of the cloth. This one is a property of the loom — the number of distinct columns in the matrix — and it is very probably the strongest single predictor of which of the twenty-two thousand four-by-four drafts anybody ever wove.

weaves · Shafts A leno and the open plain weave it is not. Two warp ends and the picks they hold. On the left the doup end passes under its partner between picks and comes up the other side; on the right it never crosses, which is an open plain weave at the same sett. The layer count under each panel is computed by the same criterion that decides every other draft, and it returns the same verdict for both.

The criterion cannot see friction

This site's central check is exact, decidable in linear time, and structurally incapable of distinguishing a carpet from a fabric that sheds. That is not a defect to be repaired — a separation exists or it does not, and there is no margin in it — and the fancy weaves are precisely the constructions that live in the gap.

fancy · Integrity The block condition, one half at a time. Every block shape from 8×8 down, for 8-end satin figured on 8-end sateen, each an exhaustive census of all 65,536 four-by-four profiles. The bar is split: the dark part is figures that separate with a thread left loose on the face, and the light part is figures that separate with nothing visible wrong. Shapes satisfying the block condition in one direction only are marked, and none of them has a light part at all. What the chart cannot show is why: the census is exhaustive and the theorem behind it is not proved here.

A rectangular block is not half a rule

The block rule was proved for square blocks and the rectangular case was recorded as not run, on the grounds that a block a repeat wide and half a repeat deep satisfies only half the condition. Running it turns up two things: half the condition rules out the failure nobody can see, and a block turned through a right angle is a different design — which a square census cannot notice, because a square block is its own transpose.

pattern · Blocks A tube. A two-layer fabric 6 ends wide in each layer, with the weft's path drawn across the section below the draft. 1 piece of cloth, 0 free selvedges, 1 shuttle, and a developed width of 12 ends however the edges are joined. The connectivity of the infinite repeat is 2 for this draft and cannot tell this construction from the others.

A tube and two cloths are the same draft

Two separate fabrics, a cloth twice the width of the loom and a seamless tube are the same draft to the last square. The check this site is built on reports two layers for all three and is right every time — because the thing that separates them is four free selvedges, or two, or none, and a repeat has no selvedges in it.

fancy · Double cloth Everything the relative origin decides. Each of six quantities computed from a weave matrix, swept over all 64 relative origins of 8-end satin figured on 8-end sateen. A quantity that takes one value across the sweep is a gauge freedom of the pair; one that takes several is something a designer chooses without knowing it. longest float takes 2 values; interlacing rate takes 2 values; weft-face fraction takes 3 values. The origins fall into 3 different partitions, so the moving quantities are not all decided by the same number. What the table cannot show is the census over all 65,536 profiles, which is a seventh column, and the one that showed the origin decides whether the cloth holds together.

What else the relative origin decides

Where two weaves start relative to each other decides whether the cloth holds together, and it has a second consequence beside that. Two is what a search finds when it looks twice. Sweeping every origin against every measure of the cloth turns up a third — the longest float, which is the one property a weaver actually looks at — and turns up an earlier figure caption that says the opposite.

pattern · Blocks Where a stitch can hide on a 5-end satin face. The face weave on point paper, with a mark on every gap between two ends at which a stitch would be covered. 15 of the 25 positions in the repeat pass the cover rule, which is 60 per cent of them, and 5 of those can be used at once without two stitches sharing a pick or a gap.

Where a stitch can hide

One reversed intersection turns two cloths into one, and half the intersections in the repeat would do it. Almost none of them may be used — a plain-faced double cloth has nowhere at all to put a stitch, a five-end satin has fifteen places or none depending on which rule is asked, and two satins of the same order differ by a factor of two.

fancy · Double cloth What holds a tuft in, in newtons. The withdrawal force of a V-fastened and a W-fastened tuft over the reported range of yarn-on-yarn friction, on a duck ground with 1.00 N in each pick. Each is the friction at the wraps, with each wrap's share dragged around every wrap between it and the pulled end — a capstan series rather than a single factor. W runs from 0.79 to 6.84 N and V from 0.15 to 0.41. Both are an order of magnitude below what a carpet is specified at, which is a finding about carpets rather than about the model. What the chart cannot show is the backing, which is where the rest of a tufted carpet's anchorage comes from.

What holds a tuft in, in newtons

The pile ladder computed a tuft's anchorage as a capstan ratio and said, correctly, that a ratio was all it could offer. A ratio multiplies a tension and there was no tension anywhere on this site. There is one now — and the answer, put beside what a carpet is actually specified at, falls short by a factor of three.

fancy · Pile Which seams slip and which break. For each cloth, the grip a 10 mm seam allowance offers divided by the thread's own breaking load. Above one the fabric or the thread gives first and the seam holds until it does; below one the threads slide out and the seam opens with the cloth intact. voile, batiste, poplin, sheeting break; cheesecloth, muslin, duck, filter slip. The allowance that would save every cloth in the table is 74 mm, which is set by the openest of them alone. What the chart cannot show is the stitching itself, which has its own strength and its own way of cutting the threads it passes through.

A seam slips before it breaks

A sewn seam fails in one of two ways and the trade names them separately: the threads pull out of the cloth beside the stitching, or something breaks. Which one a given cloth does is decided by whether its seam allowance clears the length at which grip beats strength — and at the ordinary ten millimetres, the table divides four against four.

applied · Seams What combination adds to the manuals' reach. The three counts. The manuals' own operations on their own seeds reach 9 of the 426 four-by-four cloths. Admitting stripes, checks and figures of any two seeds — 17,787 constructions, of which 177 repeat inside four ends and four picks — takes it to 28, a gain of 19. That is a threefold rise and it leaves 398 cloths unreached, which is 93.4 per cent of the catalogue. What the chart cannot show is combinations of combinations, which are excluded on purpose: the closure's seeds have to be what a chapter actually teaches or the count measures something else.

What combining two weaves reaches

The account before it found that the manuals' own operations on their own basic weaves reach nine of the 426 four-by-four cloths, and recorded one exclusion honestly: combination — striping, checking and figuring — was left out, because a combination of two four-end weaves is eight ends wide and so is not a four-by-four cloth at all. Admitting it triples the reach and leaves ninety-three per cent of the catalogue outside.

weaves · Derivation A V-fastened tuft. A cut pile bound into its ground by V fastening, drawn in section. The pile end passes beneath 3 of the 6 ground picks and wraps 1 half-turn around them in all. The integrity criterion says the tuft is attached; how hard it is held is a different question with a different model behind it.

A chenille is a yarn that is already a fabric

A chenille yarn is a woven gauze cut into strips. Every structural question this collection asks about cloth can be asked about it — does it hang together, how many systems has it, what holds the pile in — and the answers are the same answers one level down.

fancy · Fancy yarn A plain weave with one end missing. A plain weave on the left and the same cloth with one end broken and not pieced up on the right, drawn over 2 repeats so that the fault can be seen as the cloth has it: absent from every repeat, for the whole length of the piece. The picks that were held by the missing end are now held by whatever is on either side of it, so the longest float across the ends goes from 1 to 3 end widths — measured in the width the cloth had rather than in the narrower repeat, because the place the end used to occupy is still there. Every pick still changes side somewhere, so the cloth holds together — which is what happens in 55% of all the ways a four-by-four draft can lose an end.

What a missing end does to the weave

Every four-by-four draft there is, with each of its four ends taken away in turn: ninety-one thousand cloths, and not one of them falls into layers. What happens instead is worse, and the criterion has never had to report it before.

weaves · Integrity One pick of a 2/2 twill made in the wrong shed. Pick 2 of a 2/2 twill laid in the shed belonging to another pick. The thread is there, it is beaten up in its place, and it is simply not the pick the design asked for — so the fault is a bar the whole width of the cloth and one pick deep. This one leaves the cloth sound, with its longest float at 3. Across every four-by-four draft and every possible wrong shed — 1,372,440 substitutions — 63.2% leave a cloth that still hangs together, 36.6% leave a thread loose, and 0.25% split the cloth. The same wrong shed is harmless in one draft and destroys another, so nothing about the size of the mistake predicts the size of the fault.

A mispick is one row in the wrong place

Every four-by-four draft, with each of its picks replaced by every shed the loom could have made instead: a million and a third substitutions. Two thirds leave a cloth that still hangs together, a third leave a thread held by nothing, and the same wrong shed is harmless in one draft and fatal in another.

weaves · Derivation The fold the trade actually makes. 2 singles of 20 tex cotton at 800 turns a metre, folded at 566 — a ratio of 0.707. That is 1/√2, the ratio at which the fold's surface helix angle equals its singles' — 22.8° — because a fold of 2 singles is √2 times the diameter. The trade's own bracket for 2 folds is 0.6 to 0.75, and it contains this number.

A leno twists what a weave only crosses

Every woven cloth's threads have a linking number of zero, and that is why an open cloth slips. A leno is the one woven structure whose warp ends wind about one another, so it is the one whose threads are linked — and it is famously the structure that holds at setts where nothing else does.

fancy · Leno Unlinked: a woven crossing: as close as anybody likes, and never through. Two closed curves and the Gauss linking integral taken over them, which returns 0.0000 at 200 segments a curve. A woven crossing: as close as anybody likes, and never through. A linking number is an integer, so a value coming back at a few thousandths of one is the discretisation reporting itself rather than a fabric that is slightly linked. The two arrangements are the two ways of making cloth: a knitted fabric's courses link and a woven cloth's threads do not, at any crimp and for ever.

A braid is a third way to hold threads

Weaving holds by friction and knitting holds by linking. A braid does neither: its strands travel across the structure and back, so no pair of them is linked and no pair of them returns to where it started — and it holds without a reed, a beat-up or a sett.

fancy · Integrity A two-layer interchange, 1 block by 2. A two-layer cloth whose layers change places from block to block, drawn as the draft and as the section a weaver would draw. Each block is one repeat of the stack, 4 picks by 4 ends, and the design has 2 boundaries in it. Every strand in the draft is coloured by the cloth this site's criterion puts it in, and there is one colour, because there is one cloth — with no intersection reversed anywhere in the repeat. A stitch joins two layers at a point; an interchange joins them along a line, and the line is the design's own block boundary rather than anything added to it. The section below is schematic: it draws each ply as a line rather than as its threads, because what has to be seen is that the two lines cross, and a section at thread level over 2 blocks is a picture nobody can count.

An interchange joins what a stitch would have had to

The rung below spent a whole essay on where a stitch may be put in a double cloth, and found face weaves with nowhere to put one at all. A design in which the two layers change places from block to block needs no stitch anywhere: the boundary is the join. Two blocks side by side make one cloth with not a single intersection reversed, and the same two blocks with no boundary between them make two.

fancy · Double cloth How many layers the repeat, the harness and the beams each allow. Three ceilings on the number of layers a double cloth can have, for five layer weaves. The repeat's bound is half its ends and is a property of the notation. The harness's is the strain budget — 13 shafts on an ordinary broad loom at a 1.0% warp strain limit — divided by the shafts one layer of that weave costs. The beams' is how many warps the loom carries, which is 2. The shortest of each three is marked, and it is the beams at the coarse end of the table and the harness at the fine end; the repeat is never the binding one except at two-end layers, where it happens to coincide with the harness. A double cloth of eight-end satin layers needs 16 shafts and the budget is 13, so it is a jacquard construction by arithmetic rather than by choice. What the bars cannot show is the pick rate: a k-layer cloth needs k times the picks per centimetre of finished cloth and takes k times as long to weave, which is a cost rather than a ceiling and is the reason four-layer cloths are rare even where they are possible.

The repeat allows four layers and the loom allows two

A repeat of eight ends can hold four separable cloths, and the site has a witness that reaches the bound exactly. No loom weaves four. The harness's strain budget buys thirteen shafts and a layer costs its own weave's shaft count, so five-end satin layers stop at two and eight-end satin layers cannot be doubled on a dobby at all — and two differing layers already want a beam each. The notation's ceiling is the only one of the three that is never binding.

fancy · Double cloth A knitted interlacing, and the number that makes it a fabric. Two loops idealised to rings, one drawn through the other, which is what a needle does. The Gauss linking integral returns 1. A knitted fabric of n wales has that between every pair of adjacent courses n times over, and it is the whole of why a knitted fabric can be made from one thread and taken apart by pulling it.

Why a knit runs and a weave frays

The two fabrics fail in two ways and everybody knows which is which. This collection has described both accurately for eighteen phases without being able to say what causes them, and the cause turns out to be one integer each: nought for a cloth, one per wale for a knit.

cloth · Topology How much of a fabric's yarn crosses between the beds. The share of half periods that cross from one bed to the other, read off each structure's own traverse rather than quoted. It is the mechanical difference between these fabrics in this account: a half period that crosses climbs the whole bed gap and one that does not climbs a yarn diameter. Single jersey and a tubular fabric come out at zero — the tubular one because its two faces are made on separate courses and never meet — and a one-by-one rib comes out at one, with every sinker loop crossing. A two-by-two rib is at a half, which is the number a reader would guess and is here counted.

A tube and an interlock balance for different reasons

Two structures come out identically flat on a signed count and are as unalike as two knitted fabrics get. One is two jerseys that curl in opposite directions and are joined at the edges; the other is a fabric whose every course crosses. Telling them apart needs a different question asked of the same grid.

knits · Two-bed A woven crossing, and the number that never changes. A warp end and a weft pick at 6% crimp, drawn with the thickness expanded three times so the interlacing can be seen. Each goes over its neighbour and comes back; neither passes through the other. The Gauss linking integral over the pair, closed far outside the crossing, returns 0.0000. It returns that at every crimp and for every weave, because crimp moves a thread up and down across its neighbour and a curve that goes over and comes back has done nothing a linking number can see.

A woven cloth is not linked at all

Every thread in every woven cloth passes over its neighbours and comes back. None of them passes through. So the linking number of any two threads in any weave is zero, at any crimp, permanently — and almost everything a cloth does that a knitted fabric does not follows from that one number being nought.

weaves · Topology What links what, in the two ways of making cloth. The linking number between two adjacent courses, for a knitted tube of 12 wales, for the same tube as this collection's model draws it, and for a woven cloth's two thread systems. The fabric's is 12 — one for every needle loop drawn through the loop below. The model's is -0.0000, because it places the interlacing at a point where two centre lines pass a diameter apart and two curves passing beside one another are not linked. The woven cloth's is -0.0000 and always will be, at any crimp and for every weave. That last row is not a defect of any model: a woven cloth really is unlinked, and it is the reason it frays where a knitted fabric runs.

A point cannot link

A knitted fabric of n wales has a linking number of n between every pair of adjacent courses. This collection's model of the same fabric has zero, and it has zero because the interlacing was declared to be a point where two centre lines pass a diameter apart — which is a near miss, and a near miss is not a knot.

knits · Topology The crest, and the loop that ought to be holding it open. One course of the solved fabric in plan, with the two half periods that meet at a crest marked. They approach to 0.003 mm — 0.018 of a yarn diameter — and run within that of one another for more than a millimetre of arc. The ring drawn between them is the needle loop of the next course, which is what holds them apart in a fabric and what this model does not have: the interlacing was declared a point, and a point holds nothing open. The same omission is what makes the course's writhe zero and its linking number zero, so three of this collection's findings are one defect seen three ways.

What holds a crest apart

Two half periods meet at every crest of every course and, in this collection's model, run within a fiftieth of a yarn diameter of one another for more than a millimetre. In a fabric what holds them apart is the loop of the next course drawn between them — which is the loop this model does not have.

knits · Contact A knitted interlacing, and the number that makes it a fabric. Two loops idealised to rings, one drawn through the other, which is what a needle does. The Gauss linking integral returns 1. A knitted fabric of n wales has that between every pair of adjacent courses n times over, and it is the whole of why a knitted fabric can be made from one thread and taken apart by pulling it.

A tuck is the one stitch that links twice

Knitting has three stitches and only one of them makes a new link. A knit stitch links a loop to the loop below; a miss links nothing; and a tuck holds two loops in one head — which is why a tuck stops a run and why the three cannot be described by one number.

knits · Stitch notation 8×2 and 2×8 over every origin. Two grids of the 16 relative origins of 2/2 twill under 8-end satin, the row being how many picks the ground is started along and the column how many ends. The left grid is the census at a block 8×2, the right at 2×8; a square is filled where some of the 65,536 profiles separate. 8×2 fails at 8 origins and 2×8 at 8; both fail at 0 and neither at 0. Turning the cloth over and through a right angle sends each origin to another, and the letters mark where: every letter lands on a square with the same answer, so the two shapes are one census read at relabelled origins.

A turned block is a moved origin

An eight-end satin figured on a 2/2 twill fails on 55,536 profiles at a block eight picks by two ends and on none at two by eight, and that was read as a property of the block's shape. Sweep the relative origin as well and the two shapes trade places: at every one of the sixteen origins exactly one of them fails, and over the sixteen they fail equally often. A shape asymmetry that no origin removes exists, and it needs a satin whose move squared is not one.

pattern · Blocks Linked: a knitted interlacing: one loop drawn through the next. Two closed curves and the Gauss linking integral taken over them, which returns -1.0002 at 200 segments a curve. A knitted interlacing: one loop drawn through the next. A linking number is an integer, so a value coming back at a few thousandths of one is the discretisation reporting itself rather than a fabric that is slightly linked. The two arrangements are the two ways of making cloth: a knitted fabric's courses link and a woven cloth's threads do not, at any crimp and for ever.

What a closed thread cannot choose

A thread whose ends are held has a quantity it cannot change without breaking: the total number of times its material winds about its own axis, plus the number of times that axis winds about itself. The two can trade, and everything a twisted yarn does when it is let go is that trade happening.

mechanics · Topology

Named alongside it

The objects these essays reach for when they reach for this one.

ConnectivityRepeatCensusFrictionFloatInterlacingDouble clothLinking numberPoint paperCapstanLoose endPile

All concepts