Textile Structure
how cloth is put together
Concept

Pile — where it appears

A third thread system standing out of a ground cloth, held to it by wrapping rather than by being woven into it. How hard it is held is a capstan problem, so the fastening's wrap angle decides the anchorage and the ground picks decide the rest.

Named by 14 essays across 3 fields — each of them below, with the objects they name alongside it.

The 5-end satin. The 5-end satin on point paper, a filled square meaning the warp is on the face. Its longest float, its interlacing count and the number of separable cloths it describes were all counted from the matrix that drew it.

What the matrix cannot say

A weave is a binary matrix, and the whole of this collection rests on it. So it is worth setting down, in one place and precisely, what that encoding decides exactly, what it decides while appearing to decide something else, and the four quite different reasons a real fabric can fall outside it altogether.

cloth · What cloth is A V-fastened tuft. A cut pile bound into its ground by V fastening, drawn in section. The pile end passes beneath 3 of the 6 ground picks and wraps 1 half-turn around them in all. The integrity criterion says the tuft is attached; how hard it is held is a different question with a different model behind it.

Pile is a third thread system

Velvet, corduroy, plush and carpet all carry threads that are not woven into the ground in the ordinary sense. Two of the three systems make a perfectly good matrix and the third is not in it — so the encoding this whole site rests on has nothing to say about the part of the fabric a hand actually touches.

fancy · Pile What a tuft's wrap is worth at μ = 0.3. The two classical ways of binding a cut pile into its ground, with the holding force each provides as a multiple of the tension applied to the free end. The model is the capstan equation and the friction coefficient is measured rather than derived, so the ratio between the two matters and neither absolute number should be quoted alone.

How a tuft is held

A V-fastened tuft and a W-fastened tuft are both attached, and the integrity criterion returns the same verdict for both. One of them is specified for hotel corridors and the other sheds. What separates them is not a topological property at all — it is an angle, and it needs a coefficient somebody has to measure.

fancy · Pile Corduroy: floats of 6 ends, cut. 3 wales of an extra weft floating over 6 warp ends each, cut at their midpoints so that each half stands away from the ground. The pile height is half a float's length and nothing else decides it, so a finer sett at the same float count gives a shorter pile; the wale spacing is the float plus its binding ends.

Corduroy is a cut float

An extra weft floats over some ends, a knife runs along the cloth, and each half of the float stands up. So the pile height is exactly half the float's length — which makes corduroy the one pile fabric whose surface is decided entirely by a quantity this site has been counting since its first essay.

fancy · Pile Terry at a let-off of 5 to one. Towelling has two warp beams. The ground warp is held at ordinary tension; the pile warp is let off 5 times as fast, and the excess has nowhere to go but up. The loop height follows from the ratio and the pick spacing, and no float length appears in it.

Terry needs two beams

A towel's pile is not woven longer. It is fed longer — from a second warp beam let off several times faster than the first — so the loop height follows from a ratio and a pick spacing, and the float length that decides a corduroy does not appear in it anywhere.

fancy · Pile One cloth, before the knife. Double plush: two ground cloths woven face to face with a pile warp shuttling between them. Uncut, the pile is the only thing either ground touches the other through, and the integrity criterion says one cloth. Cut down the middle, every pile end is severed and the same criterion says two. The whole manufacture is the deliberate destruction of an integrity the criterion otherwise exists to confirm.

Velvet is cut apart

Two ground cloths are woven face to face with a pile warp shuttling between them, and while it does the whole thing is one cloth — the criterion says so, and the pile is the only reason it is true. Then a knife runs down the middle and the same criterion says two. The manufacture is the deliberate destruction of cloth integrity.

fancy · Pile A leno and the open plain weave it is not. Two warp ends and the picks they hold. On the left the doup end passes under its partner between picks and comes up the other side; on the right it never crosses, which is an open plain weave at the same sett. The layer count under each panel is computed by the same criterion that decides every other draft, and it returns the same verdict for both.

The criterion cannot see friction

This site's central check is exact, decidable in linear time, and structurally incapable of distinguishing a carpet from a fabric that sheds. That is not a defect to be repaired — a separation exists or it does not, and there is no margin in it — and the fancy weaves are precisely the constructions that live in the gap.

fancy · Integrity What holds a tuft in, in newtons. The withdrawal force of a V-fastened and a W-fastened tuft over the reported range of yarn-on-yarn friction, on a duck ground with 1.00 N in each pick. Each is the friction at the wraps, with each wrap's share dragged around every wrap between it and the pulled end — a capstan series rather than a single factor. W runs from 0.79 to 6.84 N and V from 0.15 to 0.41. Both are an order of magnitude below what a carpet is specified at, which is a finding about carpets rather than about the model. What the chart cannot show is the backing, which is where the rest of a tufted carpet's anchorage comes from.

What holds a tuft in, in newtons

The pile ladder computed a tuft's anchorage as a capstan ratio and said, correctly, that a ratio was all it could offer. A ratio multiplies a tension and there was no tension anywhere on this site. There is one now — and the answer, put beside what a carpet is actually specified at, falls short by a factor of three.

fancy · Pile How much too thick a round section is, and what reconciles it. For each cloth in this site's table: the thickness a circular Peirce section predicts, the thickness a cloth of that construction measures, and the force per crossing that makes the flattened model reproduce the measurement. The over-prediction runs from 36% to 81%. The reconciling forces span a factor of 4.6 across a table whose counts span a factor of six, and every one of them is of the order of the contact force the cloth's own warp tension supplies — which is what makes this a model rather than eight fitted parameters. What the rows cannot show is that the thicknesses are trade figures for cloths of these constructions rather than measurements of these particular fabrics, so what is being read is an ordering.

The criterion gets a force

This site's integrity criterion decides exactly whether a draft describes one cloth, and has one standing limitation: it says a tuft bound under one pick and a tuft bound under three are both attached, and it is right, and one of those is a carpet while the other sheds. What separates them needs a normal force in a fabric that is not under tension — the number the rung that computed it recorded as unavailable, and the one a thickness gauge now supplies.

fancy · Integrity The pressure a 30° twist puts on its own fibres. A twisted yarn squeezes itself. Every fibre under tension at a radius pulls inward with sin²θ of its tension per unit length, and integrating outward to the surface — where the pressure is zero by definition, because there is nothing outside to push against — gives p(r) = ½σ(cos²θ(r) − cos²α) in closed form. At a surface angle of 30° the pressure on the axis is 12.5 per cent of the core fibre's own axial stress and the mean over the section is 5.65 per cent of it. The shading is that closed form and the curve is the same function plotted; the shape is what matters, and its one uncompromising feature is the zero at the edge. The outermost fibres are held by nothing, which is why a yarn is hairy, why a surface fibre is the one that comes away on a finger, and why singeing changes a yarn's behaviour out of all proportion to the mass it removes.

A tuft is set so it cannot untwist

A cut pile tuft has a free end, and at a free end the pressure holding the twist is zero. So the twist runs out over a computable length, the tuft opens, and a carpet loses its appearance long before it loses any material.

fancy · Pile A V-fastened tuft. A cut pile bound into its ground by V fastening, drawn in section. The pile end passes beneath 3 of the 6 ground picks and wraps 1 half-turn around them in all. The integrity criterion says the tuft is attached; how hard it is held is a different question with a different model behind it.

A chenille is a yarn that is already a fabric

A chenille yarn is a woven gauze cut into strips. Every structural question this collection asks about cloth can be asked about it — does it hang together, how many systems has it, what holds the pile in — and the answers are the same answers one level down.

fancy · Fancy yarn Three kinds of surface, and only one of them starts open. The bearing curves of a 2/2 twill in sheeting, of a terry loop pile, and of a cut corduroy pile of 30 tex, over the first six per cent of a cloth's thickness. The woven curve opens as the square root of the depth and the loop pile's does the same, because a loop's top is a curved thread like any other. The cut pile does not open: it is a flat line at 5.2% of the plan, from a depth of nothing, because a blade severed every tuft in one pass and left every end in one plane. That is not a larger contact area, it is a different kind of contact area — one that does not vanish as the load goes to zero, which is a property no woven surface has.

A pile is the only surface with no crowns

Every other fabric touches on the tops of curved threads, so its contact vanishes as the load goes to zero and the pressure on what is touching rises without limit. A cut pile touches on flat ends left in one plane by a blade — so its contact is finite at no load at all, its pressure concentration is bounded, and it is the only fabric whose abrasion mass loss is an honest measure of its damage.

fancy · Pile Hair, nap and pile are one construction at three settings. 12 mm of sheeting at one pair of scales, carrying each of this site's three protruding surfaces — 50 pixels to the millimetre along the cloth and 29 off it. They are the same object, fibre standing off a cloth with a density, a length and an anchor, and they differ by 9-fold in density and 4.8-fold in length. What actually separates them is the third line under each name: hairs are held by whatever the twist happened to leave, a nap by the float it was pulled from, and a pile by a W or a V through three picks. Only the last two were chosen. The pile's tufts are drawn in the float colour because that is what a woven pile is, and they are all one length because a blade cut them; the hairs and the nap are drawn as measured quantities and their lengths come from the population's own exponential. Each panel clips to the room it has, and the densest of the three is drawn at the model's own number rather than thinned.

Hair, nap and pile are one construction

This site now has three surfaces made of fibre standing off a cloth, arrived at from three different directions and in three different fields. They are the same object at three settings, and what separates them is not what they are but how much of them anybody decided.

fancy · Pile 6 tapered panels laid across a 150 cm cloth three ways. 6 panels 14 cm across the top, 32 cm across the bottom and 75 cm long, laid across a cloth 150 cm wide, drawn to scale. Turned end for end alternately, 6 fit side by side and the 6 take 75 cm of cloth. Laid all one way in lanes, 4 fit and they take 150 cm. Laid all one way with alternate columns shifted half a length, 5 columns fit and they take 150 cm. What the drawing cannot show is a real marker's other pieces, which fill the gaps these leave.

A nap is paid for by the taper of the pattern

A raised cloth's fibres lean, so a panel turned end for end shows a different amount of fibre and every piece of a garment has to lie the same way along the bolt. What that costs is not a property of the cloth. A rectangle costs nothing laid one way; a tapered panel costs (1 − r)/(1 + r) of extra cloth in lanes, where r is its narrow width over its wide one; and the best any one-way lay can do is exactly half of that, because a trapezoid's difference body is a hexagon and hexagons tile. On a real width it arrives in whole panel lengths: six skirt gores take 75 centimetres two ways and 150 one way.

finishing · Nap

Named alongside it

The objects these essays reach for when they reach for this one.

Cloth integrityCapstanFrictionConnectivitySpecificationVelvetTuftAbrasionAnchorageContact forceCrimpHair layer

All concepts