Velvet — where it appears
Named by 5 essays across one field — each of them below, with the objects they name alongside it.
Pile is a third thread system
Velvet, corduroy, plush and carpet all carry threads that are not woven into the ground in the ordinary sense. Two of the three systems make a perfectly good matrix and the third is not in it — so the encoding this whole site rests on has nothing to say about the part of the fabric a hand actually touches.
Corduroy is a cut float
An extra weft floats over some ends, a knife runs along the cloth, and each half of the float stands up. So the pile height is exactly half the float's length — which makes corduroy the one pile fabric whose surface is decided entirely by a quantity this site has been counting since its first essay.
Velvet is cut apart
Two ground cloths are woven face to face with a pile warp shuttling between them, and while it does the whole thing is one cloth — the criterion says so, and the pile is the only reason it is true. Then a knife runs down the middle and the same criterion says two. The manufacture is the deliberate destruction of cloth integrity.
A crushed pile is not held down by its fibres
A carpet flattened under a foot has bent its tufts through a right angle, which sounds severe and is not: the fibres in a five-millimetre pile are strained under two tenths of a per cent, an order of magnitude below the smallest strain anybody has measured a recovery at. What holds a pile down is the tufts leaning on one another.
A pile is the only surface with no crowns
Every other fabric touches on the tops of curved threads, so its contact vanishes as the load goes to zero and the pressure on what is touching rises without limit. A cut pile touches on flat ends left in one plane by a blade — so its contact is finite at no load at all, its pressure concentration is bounded, and it is the only fabric whose abrasion mass loss is an honest measure of its damage.
Named alongside it
The objects these essays reach for when they reach for this one.
PileCloth integrityConnectivityTuftAbrasionAnchorageBearing curveBending rigidityContact pressureCorduroyCrown lineDouble cloth