Textile Structure
how cloth is put together
Concept

Dart — where it appears

A wedge removed from a flat pattern and sewn up, supplying part of the angular deficit a curved form demands of a cloth that cannot stretch. The deficit it supplies is the Gaussian curvature of the surface integrated over the region, which is why a sphere needs one full turn of it.

Named by 4 essays across 2 fields — each of them below, with the objects they name alongside it.

A cloth laid over a sphere. Every thread segment is exactly one pitch and none has stretched. What has changed is the angle at each crossing, and the amount is decided by the surface — a developable one costs nothing and a curved one costs more the further the cloth goes.

Why clothes need darts

A flat cloth goes round a cylinder for nothing and cannot go round a sphere at all without shearing. The amount of shear is decided by the curvature, and when it exceeds what the threads allow, something has to be cut out.

mechanics · Drape Where a bias cut's waste actually is. A bolt of cloth with panels placed at a stated angle, the ones that fit drawn and the rest of the cloth left shaded. Identical panels at a single angle tile the plane exactly, so the interior of the bolt loses nothing at all and the whole of the waste is at the two selvedges. The inset is the single-panel bounding box, which is the picture the usual account of bias cutting draws.

The bias cut and the selvedge

A bias-cut square costs exactly twice its own area, and every other shape costs more. That is an exact result about one panel — and it is not where a cutting room's waste comes from, because identical panels at one angle tile the plane. The loss is at the two selvedges, so it falls as the cloth gets wider, which no account in terms of the diagonal can explain.

applied · Cutting How much of the curvature a cloth can take without being cut. The dart angle a spherical cap still demands after the fabric's own shear has absorbed what it can, against how closely the cloth is set. The total the cap demands is fixed by Gauss–Bonnet and is the same for all of them; what changes is how much of it the trellis can supply before its threads jam. An open cloth drapes a hemisphere with no dart at all; a closely set one has to be cut from the start.

A hemisphere costs one full turn

The total angle a pattern must remove to cover a hemisphere is exactly 360 degrees, and it is the same for a hat and for a stadium dome. What changes with the fabric is how much of that the cloth can supply by shearing instead of by being cut — and that is a property of the sett, computed from the angle at which its threads jam.

applied · Cutting The shear a dome demands, against how far round it the cloth reaches. A flat sheet of inextensible threads takes a double curvature only by shearing, and the shear it needs depends on how far round the dome it has to reach rather than on how big the dome is — a knee, a shoulder and a beach ball demand exactly the same at the same fraction of their own radius. The horizontal line is the locking angle for a sheeting, where the threads are touching side by side and the mechanism has nowhere left to go. Reaching one radius round takes the cloth to 85% of that, and reaching 1.2 radii passes it. What the plot cannot show is the frictional part: a shear well inside the locking angle is still a shear at crossings friction is holding, so a knee that is domed a thousand times keeps a little of each one.

A knee is a dome imposed a thousand times

A flat sheet of inextensible threads takes a double curvature only by shearing, and how much shear it needs depends on how far round the dome it has to reach — not on how big the dome is. So a knee and a beach ball demand the same, and a trouser knee covered to its own equator is at 85 per cent of the angle at which the threads touch side by side.

applied · Damage

Named alongside it

The objects these essays reach for when they reach for this one.

DevelopableDrapeFishnetGaussian curvatureLocking angleMarker efficiencyShearBaggingBiasBias-cutDirectionDouble curvature

All concepts