Textile Structure
how cloth is put together
Concept

Yarn friction — where it appears

The coefficient of friction between one yarn and another, reported as a range because it depends on fibre, finish and moisture. Every result on this site that uses it is either a ratio that survives the range or is quoted as an interval.

Named by 7 essays across 5 fields — each of them below, with the objects they name alongside it.

A plain knit's two relaxation steps. Munden's three relaxation states are usually given as three sets of constants. Read as a path they are two steps, and the two compose to the whole exactly — which is a real check, because the three sets were measured independently. The first step is the larger in the course direction and the smaller across the wales, and the second is 0.64 of the first lengthwise. That is the shape of a laundering series and it is the same mechanism: a fully relaxed state is reached by tumbling rather than by waiting, so what the standard specifies is a quantity of agitation and not a duration. What the bars cannot show is the loop length, which cancels out of all four numbers because every dimension of a knit is a loop length times a dimensionless constant.

A knit relaxes for as long as it is allowed to

Munden's three states are usually given as three sets of constants. Read as a path they are two steps, they compose exactly, and the second is not a smaller version of the first — the fabric shrinks twice as much along its courses as across its wales on the first step and rather less than half as much on the second.

knits · Knit A 5.0 mm cotton pile standing and crushed. A pile tuft standing 5.0 mm proud and the same tuft pressed flat, which turns it through a right angle over its own length and so bends it to a radius of 3.18 mm. Its fibres are strained 0.187% — an order of magnitude below the smallest strain anybody has measured a recovery at, so this file declines to say what fraction comes back. The consequence is that a crushed carpet is not held down by its fibres: what keeps a pile flat is the tufts leaning on one another and the friction where they touch. Below 0.469 mm the fibre does enter its measured range, which is the difference between a carpet and a velvet and has nothing to do with what either is made of. What the drawing cannot show is the neighbouring tufts, which are the mechanism.

A crushed pile is not held down by its fibres

A carpet flattened under a foot has bent its tufts through a right angle, which sounds severe and is not: the fibres in a five-millimetre pile are strained under two tenths of a per cent, an order of magnitude below the smallest strain anybody has measured a recovery at. What holds a pile down is the tufts leaning on one another.

fancy · Pile The shear a dome demands, against how far round it the cloth reaches. A flat sheet of inextensible threads takes a double curvature only by shearing, and the shear it needs depends on how far round the dome it has to reach rather than on how big the dome is — a knee, a shoulder and a beach ball demand exactly the same at the same fraction of their own radius. The horizontal line is the locking angle for a sheeting, where the threads are touching side by side and the mechanism has nowhere left to go. Reaching one radius round takes the cloth to 85% of that, and reaching 1.2 radii passes it. What the plot cannot show is the frictional part: a shear well inside the locking angle is still a shear at crossings friction is holding, so a knee that is domed a thousand times keeps a little of each one.

A knee is a dome imposed a thousand times

A flat sheet of inextensible threads takes a double curvature only by shearing, and how much shear it needs depends on how far round the dome it has to reach — not on how big the dome is. So a knee and a beach ball demand the same, and a trouser knee covered to its own equator is at 85 per cent of the angle at which the threads touch side by side.

applied · Damage What holds a pick in. The holding force on one weft, as a multiple of the tension applied to its free end. For a plain weave it is the capstan on twice the weave angle, which Peirce's geometry gives at each sett and which falls towards nothing as the cloth opens out. For a leno it is the capstan on a half-turn, which the sett does not enter at all.

A leno's hole cannot drift

A filter cloth is rated by its largest hole, and the largest hole grows one micrometre for every micrometre an end moves sideways. What holds an end in place in an ordinary weave is friction at its crossings, and that friction falls smoothly to nothing as a cloth opens — with no threshold to warn anybody. A leno's crossing does not: its ends are wrapped through half a turn by construction, so the grip has no sett in it, and at an open cloth it holds eighteen times what a plain weave manages.

fancy · Leno Wash-by-wash shrinkage, reported and modelled. The shrinkage an unfinished cotton cloth shows in each of five laundering cycles, beside what a model with no rate in it predicts. The model says a wash lets every crossing whose frictional barrier is below the cloth's current excess slip to the edge of its own band, and that is a distribution rather than a rate. Two numbers are fitted — the excess the cloth came off the loom with, 7.13%, and the spread of the barriers, 37.2× — against the first two washes. Washes three, four and five are predictions with nothing left to adjust and come out at 0.506%, 0.284%, 0.179% against reported 0.50%, 0.30%, 0.20%. What the bars cannot show is the finding underneath: the reported yarn-on-yarn friction range gives a spread of only 1.34×, which would have the tail over by the third wash.

A cloth shrinks most the first time

A laundering test reports five numbers and they fall away like a geometric series. Nothing in a wash is slow — a cloth is agitated tens of thousands of times in half an hour — so a second wash that shrinks it again is direct evidence that its frictional barriers are spread, and the ratio between successive washes measures how far.

finishing · Shrinkage What a tensioned sheeting has left of its load. A sheeting pulled to a strain, clamped at that length and left. Its length does not change, and its load does: crossings rearrange locally until the load has fallen to what friction alone can hold, which is 0.0756 N per end and is the same number whatever the cloth was pulled to. So the fraction retained is that floor over the load applied, and it falls — a cloth tensioned to 4.94 per cent keeps 29 per cent of what it was given. Below the resting band's own edge nothing is lost at all, because the cloth was never outside what friction could hold. What the plot cannot show is time: nothing here says how long the rearrangement takes, only where it stops.

A tensioned cloth loses its load

Clamp a fabric at a fixed length and its tension falls overnight. Nothing crept and nothing flowed: the crossings rearranged locally until the load had dropped to what friction alone can hold, and that level is the same number whatever the cloth was pulled to — so the harder it was tensioned, the smaller the share it keeps.

mechanics · Set The force at an interlacing, which no longer lies in the fabric. A crossing of a relaxed jersey in section on the left, with the thickness expanded 3×, and on the right the contact force drawn at the angle the solve gives it — which is a true angle, unlike anything in the section beside it. The head of one course and the feet of the next lie one yarn diameter apart through the fabric, 0.167 mm, so the interlacing is not a point in a plane and the force at it is not in one either. It comes out at 38.30 mN a stitch, turned 11.75° out of the fabric: 37.50 mN along the wales, which is what friction has to hold, and 7.81 mN through the thickness, which is what holds the two faces apart. Divided by the area a stitch occupies the second is 15.1 kPa, or 113 mmHg — a pressure, and the quantity a compression measurement reports.

The force that holds a knit open

Resolving a knitted loop's contact force out of the fabric's plane leaves a fifth of it pointing through the thickness. That fifth is 7.8 millinewtons a stitch, fifteen kilopascals over the area a stitch occupies, and it is the whole reason a jersey has a thickness rather than a plan.

mechanics · Elastica

Named alongside it

The objects these essays reach for when they reach for this one.

Permanent setAgitationBending rigidityContact forceCrimp interchangeFrictional floorInterchange budgetRelaxationRelaxation bandResidual shrinkageTensile locusTightness factor

All concepts