Textile Structure
how cloth is put together
Concept

Frictional floor — where it appears

The load a fabric held at a fixed length settles at, being what friction alone can hold. It does not depend on how hard the cloth was tensioned, so the fraction of an applied load that survives is that floor divided by whatever was applied.

Named by 2 essays across 2 fields — each of them below, with the objects they name alongside it.

Also named here as relaxation band — the same set of essays touches all of them, so they are one junction rather than several.

Wash-by-wash shrinkage, reported and modelled. The shrinkage an unfinished cotton cloth shows in each of five laundering cycles, beside what a model with no rate in it predicts. The model says a wash lets every crossing whose frictional barrier is below the cloth's current excess slip to the edge of its own band, and that is a distribution rather than a rate. Two numbers are fitted — the excess the cloth came off the loom with, 7.13%, and the spread of the barriers, 37.2× — against the first two washes. Washes three, four and five are predictions with nothing left to adjust and come out at 0.506%, 0.284%, 0.179% against reported 0.50%, 0.30%, 0.20%. What the bars cannot show is the finding underneath: the reported yarn-on-yarn friction range gives a spread of only 1.34×, which would have the tail over by the third wash.

A cloth shrinks most the first time

A laundering test reports five numbers and they fall away like a geometric series. Nothing in a wash is slow — a cloth is agitated tens of thousands of times in half an hour — so a second wash that shrinks it again is direct evidence that its frictional barriers are spread, and the ratio between successive washes measures how far.

finishing · Shrinkage What a tensioned sheeting has left of its load. A sheeting pulled to a strain, clamped at that length and left. Its length does not change, and its load does: crossings rearrange locally until the load has fallen to what friction alone can hold, which is 0.0756 N per end and is the same number whatever the cloth was pulled to. So the fraction retained is that floor over the load applied, and it falls — a cloth tensioned to 4.94 per cent keeps 29 per cent of what it was given. Below the resting band's own edge nothing is lost at all, because the cloth was never outside what friction could hold. What the plot cannot show is time: nothing here says how long the rearrangement takes, only where it stops.

A tensioned cloth loses its load

Clamp a fabric at a fixed length and its tension falls overnight. Nothing crept and nothing flowed: the crossings rearranged locally until the load had dropped to what friction alone can hold, and that level is the same number whatever the cloth was pulled to — so the harder it was tensioned, the smaller the share it keeps.

mechanics · Set

Named alongside it

The objects these essays reach for when they reach for this one.

Crimp interchangePermanent setRelaxation bandTensile locusYarn frictionAgitationBending rigidityContact forceInterchange budgetPre-shrinkingPre-tensionRelaxation

All concepts