Textile Structure
how cloth is put together
Concept

Interchange budget — where it appears

How far a woven cloth can extend before any thread has to stretch, which is where its constant-thread-length locus ends. It is a property of the sett, the two counts and the balance, so two cloths of the same yarn have different budgets and recover differently from the same strain.

Named by 9 essays across 6 fields — each of them below, with the objects they name alongside it.

The two routes a poplin has to a strain. A poplin drawn in section at three places: as woven, at the end of what its crimp can supply, and past that. Between the first two the warp's crimp falls from 8.97% to 4.85% and the weft takes on what it gave up, and the thread length is 0.4953 mm in both — nothing has stretched, and the cloth is 3.93% longer. Between the second and the third the geometry cannot move because the weft's straight run has vanished, so the cloth's extra 2.0% is the thread's extra 2.0%. What the drawing cannot show is which of the two a piece of cloth has had: the first two states look different and the last two look the same, and it is the last two that differ in whether the cloth comes back.

A cloth gives back less than it took

Everything this collection computes about a deforming fabric is reversible, and no fabric is. The repair is not a new material property: a woven cloth has two routes to a strain, one of them costs its threads nothing and comes back in full, and where the first route runs out is a number about the sett with no fibre in it at all.

cloth · Memory The interchange budget against cover, at three yarn counts. The extension a plain cloth can reach with no thread stretching, plotted against its warp cover factor, for 10, 20, 40 tex yarn. The three curves coincide, because every length in Peirce's geometry is a multiple of the yarn diameter and a spacing measured in diameters is a cover factor — so the count divides out exactly and the maximum is at 0.407782 for all of them, at a budget of 7.2857%. That the curve has a maximum at all is the finding: crimp is what a cloth spends, so more of it should be better, and past this cover the weft has nowhere to put what the warp gives up. What the plot cannot show is the balance, which moves the height of the maximum a long way and its position hardly at all.

The most a cloth can give back

The extension a cloth can find without stretching a thread comes from crimp, so setting a cloth closer ought to give it more. It does, up to a point, and then takes it away again — and the point is a cover factor of 0.4078 at a budget of 7.2857 per cent, identical to six figures for every yarn count from five tex to a hundred.

cloth · Memory The shear a dome demands, against how far round it the cloth reaches. A flat sheet of inextensible threads takes a double curvature only by shearing, and the shear it needs depends on how far round the dome it has to reach rather than on how big the dome is — a knee, a shoulder and a beach ball demand exactly the same at the same fraction of their own radius. The horizontal line is the locking angle for a sheeting, where the threads are touching side by side and the mechanism has nowhere left to go. Reaching one radius round takes the cloth to 85% of that, and reaching 1.2 radii passes it. What the plot cannot show is the frictional part: a shear well inside the locking angle is still a shear at crossings friction is holding, so a knee that is domed a thousand times keeps a little of each one.

A knee is a dome imposed a thousand times

A flat sheet of inextensible threads takes a double curvature only by shearing, and how much shear it needs depends on how far round the dome it has to reach — not on how big the dome is. So a knee and a beach ball demand the same, and a trouser knee covered to its own equator is at 85 per cent of the angle at which the threads touch side by side.

applied · Damage The poplin's two budgets as it is held stretched. What is left of a poplin's interchange in each direction as it is held at more and more warp strain. The warp's budget falls to nothing at 3.93%, which is the point of the curve; the weft's rises, because the crimp the warp gives up is crimp the weft takes on. There is one locus and one position on it, so the two are not two quantities that happen to be related — they are the two distances from one point to the two ends of one curve. The consequence is that a pre-tensioned cloth has almost no warp recovery left and more weft recovery than it started with. What the plot cannot show is that the exchange rate between them is not constant: the curve is not a straight line, and its slope is the Poisson ratio this site computes elsewhere.

A cloth has one budget for two directions

A woven cloth looks as though it carries two independent reserves of free extension, one along the warp and one across the weft. It carries one. There is a single curve of states and a single position on it, so every hundredth spent one way is refunded the other — which means a pre-tensioned cloth has not used its recovery up, it has moved it.

mechanics · Tensile The tightest fold a 20 tex cotton yarn can be given. A cloth folded as sharply as it can be folded. The two yarn crowns on the inside of the fold cannot pass through one another, so the fold's radius is the yarn's own — 0.084 mm for a 20 tex cotton yarn — and there is no measurement of an iron anywhere in the argument. At that radius a fibre free to slide is strained 7.14%, which is √(packing × fibre tex ÷ yarn tex), and the whole yarn bending as a rod would be strained exactly one hundred per cent. Cotton's measured breaking extension is 6.0% to 10.0%, so the free bound does not survive and the locked one cannot. What the drawing cannot show is the fibres inside the yarn, which is exactly what the argument is about — the picture is the same either way and the strain is fourteen times different.

A crease is a fold the crimp cannot supply

A fold needs its outer face longer than its inner, and a woven cloth's way of supplying a length is to move crimp. That runs out at a radius of millimetres, and a pressed crease is tenths of one — so the fold is handed to the fibres. How hard it strains them turns on a question this collection has been unable to settle for two fields, and a crease settles it by refusing.

finishing · Crease A 3-pick fold across a 8-end satin, move 3. A 8-end satin, move 3 on point paper with a fold 3 picks wide drawn across it at pick 3. A warp end's crimp is made where it turns from over to under, and the dots mark the turns that fall inside the fold. Averaged over the ends there are 0.75 of them, and 4 of the 8 ends in the repeat have none at all — those ends are marked with a line, and each of them crosses the fold dead straight with no crimp to give up. Over every fold position, 50.0% of end-and-place pairs are like that. What the drawing cannot show is what happens to those ends instead, which is that the whole of the fold's length difference goes into their fibres.

How sharply a weave lets a cloth fold

A fold's length difference is paid for out of crimp, and crimp is not spread evenly along a thread — it is made at the interlacings and nowhere else. So what a fold has to spend is not the weave's average crimp but whatever is inside the few picks the fold crosses, and in an eight-end satin half the warp ends have nothing there at all.

weaves · Float Elastic recovery against strain, for seven fibres. The elastic recovery of seven fibres at the strains it is reported at: extend to a stated strain, unload, read the strain returned immediately. Each fibre's points are joined and the line stops where the measurements stop, which is the point of the figure — a fibre strained past the last point on its own line is a fibre this collection declines to answer for. Nothing here is measured below one per cent of strain, and a woven cloth just past its own interchange budget is at a thread strain of a few hundredths, so the region that matters most for a fabric is the region nobody has reported. Recovery falls monotonically for every fibre, which is what lets the unmeasured region be bracketed between the lowest measured value and one rather than extrapolated. What the plot cannot show is the delayed recovery, which is excluded by the convention and is largest for the fibre with the best reputation for recovering.

Recovery is measured and nothing predicts it

A fibre's stiffness is a bracket this collection can compute the ends of. What fraction of a strain it gives back is not: it has to be looked up, the tables are thin, they stop exactly where a fabric needs them, and the most attractive explanation for the ordering they show turns out to have no signal in it at all.

mechanics · Yarn stiffness How far each cloth's sett moves between the loom and the finished state. A cloth on the loom is held: the warp is under beam tension and the picks are driven up at whatever density the take-up says. Let it go and it relaxes to the least-energy state of its own locus, which is a state at a different sett. The bars are how far each sett moves, and they always move in opposite directions because there is one locus: warp ends per centimetre fall as the cloth widens and picks per centimetre rise as it shortens. Seven of the eight move a little over one per cent; the poplin, whose two counts and two setts are the only unbalanced pair in the table, moves six and ten. What the bars cannot show is what a designer does with them, which is that the two numbers a specification quotes are not two free numbers — the finished construction is a point on a one-dimensional curve.

The construction a loom must be set to

A specification quotes ends and picks per centimetre in the finished cloth, and a loom is set to neither of them. The cloth relaxes to the least-energy state of its own locus, which is a state at a different sett — and because the locus is one curve, the two numbers a specification quotes are not two free numbers.

setting · Take-up What a tensioned sheeting has left of its load. A sheeting pulled to a strain, clamped at that length and left. Its length does not change, and its load does: crossings rearrange locally until the load has fallen to what friction alone can hold, which is 0.0756 N per end and is the same number whatever the cloth was pulled to. So the fraction retained is that floor over the load applied, and it falls — a cloth tensioned to 4.94 per cent keeps 29 per cent of what it was given. Below the resting band's own edge nothing is lost at all, because the cloth was never outside what friction could hold. What the plot cannot show is time: nothing here says how long the rearrangement takes, only where it stops.

A tensioned cloth loses its load

Clamp a fabric at a fixed length and its tension falls overnight. Nothing crept and nothing flowed: the crossings rearranged locally until the load had dropped to what friction alone can hold, and that level is the same number whatever the cloth was pulled to — so the harder it was tensioned, the smaller the share it keeps.

mechanics · Set

Named alongside it

The objects these essays reach for when they reach for this one.

Permanent setTensile locusCrimpCrimp interchangeElastic recoveryBending rigidityJammingPacking factorSettThread lengthYarn diameterBreaking extension

All concepts