Textile Structure
how cloth is put together
Concept

Loom state — where it appears

A cloth as it leaves the loom, still holding the warp tension it was woven under and not yet any dimension worth quoting. Every quoted dimension of a cloth is therefore a dimension after something has happened to it, and saying which state is not optional.

Named by 9 essays across 3 fields — each of them below, with the objects they name alongside it.

The same thread, on the loom and off it. One warp end in section over eight picks, drawn twice at the same scale. The thread is the same length in both panels; in the lower one more of that length is in the bends, so the cloth it spans is shorter. Nothing has been lost — the length has moved into the crimp. The thread's thickness and the height of its bends are drawn larger than scale so the interlacing is legible; the two panels' spacings are not.

What comes off the loom is not the cloth

Every number on this site so far describes a fabric in one particular condition — held under tension, stretched to the reed width, never wetted — and none of them says so. That condition lasts until the cloth is taken off the machine, which is the first thing that happens to it.

finishing · State The same thread, on the loom and off it. One warp end in section over eight picks, drawn twice at the same scale. The thread is the same length in both panels; in the lower one more of that length is in the bends, so the cloth it spans is shorter. Nothing has been lost — the length has moved into the crimp. The thread's thickness and the height of its bends are drawn larger than scale so the interlacing is legible; the two panels' spacings are not.

Relaxation is the crimp coming back

A cloth that shrinks in the wash has not lost any thread. The thread is exactly as long as it was; more of its length is now spent going up and down rather than along, and the difference is the shrinkage, computable to the last figure from the woven geometry alone.

finishing · Shrinkage How much a cloth can give back. Relaxation shrinkage against how much of the warp crimp the loom took out, with the area shrinkage above it and the ceiling drawn across. The ceiling is the crimp itself, read as c/(1+c): it is all the length there is to give, and no tension reaches past it.

Why the warp shrinks more

A woven cloth almost always loses more length than width, and the reason is not in the cloth. It is in the machine — the warp is held under tension for the whole of weaving and the weft is held for a fraction of a second — so the two systems arrive at the finishing works with different amounts of crimp missing.

finishing · Shrinkage What a pre-shrunk label promises. Three lengths of the same cloth: as woven, as it leaves the compressive-shrinkage machine, and where it will finally settle. The residual shrinkage quoted on a label is measured against the second of these and the total against the first, so the two numbers are not the same quantity and cannot be subtracted.

Pre-shrinking is a subtraction done in advance

A compressive-shrinkage machine takes four per cent out of a cloth before anybody buys it, and the label then quotes what is left. The two numbers are fractions of different lengths, so they cannot be subtracted — and the difference between doing that correctly and incorrectly is most of the number.

finishing · Shrinkage The same thread, on the loom and off it. One warp end in section over eight picks, drawn twice at the same scale. The thread is the same length in both panels; in the lower one more of that length is in the bends, so the cloth it spans is shorter. Nothing has been lost — the length has moved into the crimp. The thread's thickness and the height of its bends are drawn larger than scale so the interlacing is legible; the two panels' spacings are not.

The cloth gains weight by losing size

Mass per unit area is the number a fabric is bought by, and it rises by eleven per cent when a cloth relaxes — with nothing added, nothing removed and no thread changed. The quantity is a ratio, and finishing moves its denominator.

finishing · State A membrane is cut smaller than it is. Warp and fill compensation against how far the crossings flatten under prestress. With the thread lengths and the cloth's thickness both fixed there is no strain available at all — the closure condition determines the state — so the whole of the compensation is the crossings squeezing and the crimp coming out. The direction that arrives with less crimp gives back less, which is why a warp compensates less than a fill.

A membrane is cut smaller than it is

A tensioned fabric roof is cut to a pattern smaller than the shape it will take, because stressing it makes it grow. At a fixed cloth thickness a prestress can only interchange crimp — one direction grows and the other shrinks — so everything that makes both directions grow is the crossings flattening, which is the one quantity here this site cannot compute.

applied · Crimp How much a cloth can give back. Relaxation shrinkage against how much of the warp crimp the loom took out, with the area shrinkage above it and the ceiling drawn across. The ceiling is the crimp itself, read as c/(1+c): it is all the length there is to give, and no tension reaches past it.

A dimension without a state

Every essay in this field turned on the same omission, and collecting them produces a result none of them had on its own — the quantities a cloth's geometry determines divide cleanly into those a finishing works can move and those it cannot, and the division is not the one the vocabulary suggests.

finishing · State The beat-up, at the fell. The last picks of a sheeting at 26 picks per centimetre, with the beat-up zone shaded. Driving the fell forward makes the warp take more crimp and more crimp takes more thread, which the warp can only supply by stretching — so the force is the warp tension times the crimp's elasticity with respect to the pick spacing, 0.182 here. That is 0.205 N per end and 573 N per metre of reed. What the drawing cannot show is that the shaded band's width cancels out of the derivation exactly; it is drawn because a reader needs to see what is being compressed, not because the answer depends on it.

The blow that sets the pick

The take-up gear decides how far the cloth moves between picks and says nothing about the blow that puts each pick where it goes. That blow is a force, and a virtual-work argument gives it in one line — with the length of the beat-up zone cancelling out of the answer exactly, which is the part worth having.

setting · Beat-up The resting band, not the resting point. The bending energy of a sheeting along its own constant-thread-length locus, with the band in which friction can hold it shaded. The minimum is a single state; the band is 10.9 per cent of length wide, because the cloth stops sliding as soon as the energy it can release falls below the 0.0756 N friction takes to move a crossing. What the drawing cannot show is which end of the band a given piece of cloth stops at, which depends on the direction it arrived from and is what makes relaxation hysteretic.

A cloth relaxes until its threads stop pushing

The finishing field treats the relaxed state as a place a cloth arrives at. With an energy along its own locus and a friction at its crossings it is not a place but a band — and which point of the band a piece of cloth stops at depends on which side it came from, which is why washing it twice gives two answers.

finishing · State

Named alongside it

The objects these essays reach for when they reach for this one.

CrimpRelaxationShrinkageCoverPeirce's geometrySettSpecificationAreal densityCrimp interchangeFinishingWarp tensionBeat-up

All concepts