Textile Structure
how cloth is put together
Concept

Fell — where it appears

The line where newly inserted picks join the cloth, which the reed drives each pick up to. How far it moves under the beat is what sets the pick density, and it stops moving when the warp's tension balances the reed's stroke.

Named by 2 essays across 2 fields — each of them below, with the objects they name alongside it.

The shed in section. A warp line 1200 mm from the fell of the cloth at the left to the back rest at the right, with 8 shafts at 300 mm and every 16 mm behind it. Each shaft lifts its ends in proportion to its own distance from the fell, which is what gives the same 30 mm clear opening at the reed from every shaft. The resulting extension is 0.460 per cent at the front shaft and 0.722 per cent at the back, a ratio of 1.57. Vertical scale exaggerated 4 times.

The shed is an extension

Every model of a finished cloth treats a thread as inextensible, and every one of them is about a fabric that has left the loom. On the loom the warp is stretched thousands of times a minute by the shed itself, and the amount is exact trigonometry with nothing fitted in it: the square of the shed's tangent, times the shaft's own distance from the fell, over twice what is left behind it.

mechanics · Shed The two halves of a beat-up force. The force the reed must apply per metre, for a sheeting, against the number of picks that are still sliding against the warp. The elastic half — the warp tension times the crimp's elasticity with respect to the pick spacing — is 573 N/m and does not depend on the zone at all; that cancellation is exact and is the result the rung below established. The frictional half is 1133 N/m per sliding pick and is nothing but zone. Against a reported 400–1500 N/m, that leaves room for at most 0.82 picks sliding — so the fell region a weaver can see, ten to fifty picks deep, is not the same quantity as the picks that are still moving. What the rows cannot show is that this is a static friction throughout, and a beat-up is a blow.

The half of the beat-up that is all zone

The elastic half of the beat-up force is exact and the length of the beat-up zone cancels out of it, which is this site's own result and disagrees with every practical account of weaving. The frictional half is nothing but zone — and requiring the total to match the force a loom is actually built to apply puts the number of picks still sliding at about one.

setting · Beat-up

Named alongside it

The objects these essays reach for when they reach for this one.

ReedBack restBeat-upBeat-up zoneContact forceCrimpFrictionHarnessHeddleInextensibilityLoomPick density

All concepts