Textile Structure
how cloth is put together
Concept

Back rest — where it appears

The bar at the back of a loom over which the warp passes, fixing the far end of every end's path through the shed. Its height decides how the shed's strain divides between the front and back of the loom, which is a setting rather than a constant.

Named by 3 essays across 2 fields — each of them below, with the objects they name alongside it.

The shed in section. A warp line 1200 mm from the fell of the cloth at the left to the back rest at the right, with 8 shafts at 300 mm and every 16 mm behind it. Each shaft lifts its ends in proportion to its own distance from the fell, which is what gives the same 30 mm clear opening at the reed from every shaft. The resulting extension is 0.460 per cent at the front shaft and 0.722 per cent at the back, a ratio of 1.57. Vertical scale exaggerated 4 times.

The shed is an extension

Every model of a finished cloth treats a thread as inextensible, and every one of them is about a fabric that has left the loom. On the loom the warp is stretched thousands of times a minute by the shed itself, and the amount is exact trigonometry with nothing fitted in it: the square of the shed's tangent, times the shaft's own distance from the fell, over twice what is left behind it.

mechanics · Shed The harness a strain budget buys. How many shafts stay inside a 1.0 per cent warp-strain budget, against the clear shed opening the loom needs at the reed: 12 mm gives 43, 16 mm gives 36, 20 mm gives 28, 24 mm gives 21, 30 mm gives 13, 36 mm gives 7, 44 mm gives 1. The shed's tangent enters the strain squared, so the opening is much the strongest thing a loom builder controls.

The harness has a depth

Why does a dobby carry sixteen or twenty-four shafts rather than two hundred? The usual answers are about the mechanism — how many jacks a box can drive, how many hooks a dobby has — and they are real limits that are not the binding one. A stated tolerance on warp strain is a stated distance from the fell, and a stated distance is a whole number of shafts. One per cent buys thirteen.

fancy · Shafts The crossed shed, with the back standard 4 shafts behind the doup. A leno's crossing end in section from the fell to the back rest of an ordinary broad loom, in the crossed shed. The doup 300 mm from the fell lifts it 50.0 mm; its back standard 64 mm further back leaves it 60.7 mm down, beneath its partner. Between the two eyes the end climbs 110.7 mm in 64 mm, and the whole path is 70.2 mm longer than the straight line, 5.85% of the free warp, of which 63.8 mm is that one climb. The same end in the open shed, lifted at its back standard, is 7.2 mm longer, and an ordinary end on the doup's shaft 5.5 mm: the crossed shed is 12.7 times the ordinary shed. Vertical scale exaggerated 3 times. What the drawing cannot show is friction at the eyes, which would keep the extra length in the short span between them.

An easer gives back the kink the crossed shed puts in

A leno loom gives its crossing ends slack at every crossed shed, and the obvious reason — the doup carrying its end sideways — is worth a hundredth of an ordinary shed. The length is one heddle further back. In the crossed shed the doup lifts the end on the far side of its partner while the end's own back heddle, a few shafts behind, holds it down, and between those two eyes the end climbs eleven centimetres in six and a half. On a loom that stretches an ordinary end 0.46 per cent, that is 5.85 per cent — nearly thirteen times as much — and no position of the back heddle takes it below four.

fancy · Leno

Named alongside it

The objects these essays reach for when they reach for this one.

ShedWarp strainHarnessLoomReedShaftCapstanDobbyDoupEaserFellHeddle

All concepts