Textile Structure
how cloth is put together
Concept

Beat-up — where it appears

The reed's stroke driving a newly inserted pick to the fell, against a resistance the warp's own tension supplies. Its two halves — an elastic one and a frictional one — behave quite differently, and the zone of sliding picks cancels out of the first.

Named by 3 essays across one field — each of them below, with the objects they name alongside it.

The beat-up, at the fell. The last picks of a sheeting at 26 picks per centimetre, with the beat-up zone shaded. Driving the fell forward makes the warp take more crimp and more crimp takes more thread, which the warp can only supply by stretching — so the force is the warp tension times the crimp's elasticity with respect to the pick spacing, 0.182 here. That is 0.205 N per end and 573 N per metre of reed. What the drawing cannot show is that the shaded band's width cancels out of the derivation exactly; it is drawn because a reader needs to see what is being compressed, not because the answer depends on it.

The blow that sets the pick

The take-up gear decides how far the cloth moves between picks and says nothing about the blow that puts each pick where it goes. That blow is a force, and a virtual-work argument gives it in one line — with the length of the beat-up zone cancelling out of the answer exactly, which is the part worth having.

setting · Beat-up Selectable against reachable. How far up the take-up gear's catalogue a beat-up force reaches, on a sheeting. The catalogue holds 4,825 distinct pick densities between 8 and 40 per centimetre, which is the previous rung's count of what the machine can select. At 200 N per metre only 548 of them can be woven; at 2,000 it is 4,256. The fineness of the choice is untouched by the ceiling and the top of the range is cut off entirely, so the weft direction's advantage is resolution rather than reach. What the chart cannot show is the loom's own force, which depends on the beat-up mechanism and is not a property of the cloth.

A pick density is a force budget

The take-up ladder counted what a change-wheel take-up can select: 4,825 distinct pick densities between eight and forty threads per centimetre, against forty-nine warp setts a reed catalogue offers over the same range. That count assumed every setting is available. A beat-up force says otherwise, and cuts the top off the range without touching the fineness of the choice.

setting · Beat-up The two halves of a beat-up force. The force the reed must apply per metre, for a sheeting, against the number of picks that are still sliding against the warp. The elastic half — the warp tension times the crimp's elasticity with respect to the pick spacing — is 573 N/m and does not depend on the zone at all; that cancellation is exact and is the result the rung below established. The frictional half is 1133 N/m per sliding pick and is nothing but zone. Against a reported 400–1500 N/m, that leaves room for at most 0.82 picks sliding — so the fell region a weaver can see, ten to fifty picks deep, is not the same quantity as the picks that are still moving. What the rows cannot show is that this is a static friction throughout, and a beat-up is a blow.

The half of the beat-up that is all zone

The elastic half of the beat-up force is exact and the length of the beat-up zone cancels out of it, which is this site's own result and disagrees with every practical account of weaving. The frictional half is nothing but zone — and requiring the total to match the force a loom is actually built to apply puts the number of picks still sliding at about one.

setting · Beat-up

Named alongside it

The objects these essays reach for when they reach for this one.

ReedCrimpJammingLoomSettSpecificationTake-upWarp tensionBeat-up zoneCensusContact forceContraction

All concepts