Textile Structure
how cloth is put together
Concept

Dimensional stability — where it appears

Whether a fabric's measured size stays put through wear and laundering. A knit's depends on its yarn having been set into the loop's own shape rather than on friction holding it, because friction alone cannot hold a relaxed knit along its wales at any construction.

Named by 10 essays across 3 fields — each of them below, with the objects they name alongside it.

The resting band with two coefficients in it. The range of extensions a sheeting can be left in, at rest and while being agitated, at three ratios of kinetic to static friction. The upper bar of each pair is the stuck band, held by the static coefficient; the lower is the band a cloth being shaken can be left in, held by the kinetic one. Agitation narrows the band but by less than the ratio of the coefficients: at 0.75 the narrowing is 0.868. The restoring force is not linear in the extension, so cutting the friction by a quarter does not move the band's edges by a quarter of the way in. What the bars cannot show is where a given piece of cloth actually stops inside its band, which depends on which side it came from.

Why agitation helps a cloth relax

Every standard relaxation procedure agitates: tumble it, wash it, steam it, work it. The explanation given is that agitation lets the fabric find its own dimensions, which is true and is not a mechanism. The mechanism is that a sliding contact resists less than a stuck one — and putting a number on it shows the effect is real, is smaller than the obvious arithmetic suggests, and does not account for what a relaxation procedure achieves.

finishing · Friction Everything a plain knit can be, at one loop length. Bending energy over the two spacings a plain knit has to choose, for a 20 tex cotton yarn at a 3.5 mm loop, as a multiple of the energy the fully relaxed fabric holds. Darker is more. The solid edge is where the straight line between two interlacings reaches the yarn between them — the geometry's own limit, with nothing elastic in it — and there is no state beyond it at any force. Munden's three relaxation states are marked, and the thing to see is that they are not in a hollow: they lie along a slope, in order, with the most completely relaxed of them the highest. An unset yarn would slide down and to the right until it met the edge. Real fabrics sit where they were left.

The relaxed knit is not at a minimum

Differentiate a loop's bending energy along the fabric instead of across it and the answer should be zero, because a relaxed fabric is one nothing is pulling. It is not zero. It is tens of newtons a metre, downhill in both directions at once — and the three relaxation states everybody measures run the wrong way up the slope.

knits · Elastica A jersey gets taller before it gets shorter. How much a 20 tex cotton jersey shortens along its wales as it is pulled along its courses, with the course spacing at every extension chosen to minimise the loop's energy rather than assumed. Over the first 81% it is negative — the fabric gets 2.0% taller as it is pulled wider — and only then does it start to contract, reaching 88% at the geometric limit. A material with a negative Poisson ratio is a curiosity; a knit has one over part of its range for a reason with no material in it at all, which is that widening a wale at a fixed loop length first lets the loop's tightest bends open and only later starts taking height away from it.

A jersey gets taller before it gets shorter

Pull a knit along its courses and the first thing it does is grow along its wales — by two per cent, over the first eighty per cent of extension, before it turns round and contracts. The transverse response changes sign, and there is no material in the explanation at all.

knits · Knit What a knit gives when it is pulled. Force against course-wise extension for a 20 tex cotton jersey at a 3.5 mm loop, computed from the loop's own bending with the relaxed shape as the yarn's natural one. The loop length is the same at every point on the curve: nothing here is the yarn stretching. It reaches 92% extension at 2.96 N per metre and then stiffens by a factor of 85 over the rest of the range, as the straight line between two interlacings runs up against the yarn between them. This is the number the collection's second phase recorded as a lower bound it could not compute, and it is still a lower bound in one respect: friction at the contacts is not in it, so a real fabric is stiffer than this and does not come back along the same curve.

A loop is set and not sprung

The way out of a model that predicts a jersey should spread is to stop treating its yarn as a straight rod bent into a loop. A yarn that has been wetted, heated and dried has taken the loop as its own natural shape — and once the natural shape is the loop, every force downstream becomes computable with the relaxed fabric as the origin.

finishing · Elastica A loop is bent about as hard as its yarn allows. The tightest curvature anywhere on a relaxed loop, against the knitter's own tightness factor, in units of one over the yarn diameter — which is the curvature of a yarn wrapped hard round another of the same size, and the tightest bend any fabric asks for. Across the whole range a knitter can reach it stays between 0.73 and 1.27, crossing one at a tightness factor of about thirteen — which is where the trade's own usable band begins. Nothing arranged that. The only things imposed are the loop length, the yarn diameter and the two measured spacings, and the curvature is whatever the minimisation returns.

Two knits with one tightness factor are one knit

The loop model has exactly one dimensionless group in it — the yarn's diameter over the loop length — so two fabrics that share it have the same loop, to fifteen figures, whatever they are made of. That group is the knitter's own tightness factor, and it explains why an index quoted as empirical works as well as it does.

finishing · Knit geometry A knitted loop is a plane curve in a plane that is not the fabric's. A relaxed 20 tex jersey at a 3.5 mm loop, seen from the end of a course. Each course is a straight line because it is one: a half period leaves and arrives along the course direction, so the plane it bends in contains that direction, and a plane curve seen along a line in its own plane projects to a segment. The upper panel expands the thickness 3× so the arrangement can be seen and no angle may be measured off it; the lower panel is the same fabric at one scale, where the tilt is what it really is. The angle is 11.75°: a climb of one yarn diameter, 0.167 mm, against a drop of a course spacing and a diameter, 0.803 mm. Successive courses overlap by exactly one diameter, which is the interlacing, and the fabric is therefore 0.334 mm thick — two yarn diameters, with nothing fitted.

A state is a thickness too

This collection's rule is that a fabric dimension quoted without its relaxation state is not a measurement. A knitted fabric has three dimensions and only two of them obey the rule: its thickness is the same in every state, because the interlacing that sets it does not relax.

finishing · State What leaving the plane costs, which is less than nothing. Bending energy a stitch against how far the yarn climbs between one interlacing and the next, for a 20 tex cotton jersey at a 3.5 mm loop. The curve falls. A climb is not an extra bend added to a curve that was otherwise unchanged; it is part of the straight line the thread has to span, so a longer climb leaves less slack to be spent on curvature. At a jersey's own climb of one diameter the energy is 24395 nJ against 25060 for the planar model — 2.7% lower, where an earlier estimate on this site put the ride at three per cent of the loop's bending and had the sign the other way round. At a rib's climb of three or four diameters the fall is 33%.

A rib's relaxation is not its bending either

A jersey does not settle where its bending energy is least, and this collection has said so for several rungs. A rib does not either, and the model now says how far from least it would have to go: sixteen yarn diameters of bed gap before the yarn runs out, against the two or three a machine is set to.

finishing · Shrinkage A slack twisted yarn takes a coil of one size. A 20 tex cotton at 800 turns a metre. Its own torque is 1.177 µN·mm at the free bound, and a rod under tension T is stable while its torque stays under 2·√(B·T). Below that tension the straight state stops being a minimum and the thread wraps on itself at a radius of 1.59 mm. That radius is 2B/M, which is 2/(r·ω) once the torque is written out: it depends on the twist and on the ratio of the two stiffnesses, and on neither stiffness itself.

The twist a fabric gives back

A T-shirt that hung straight in the shop has its side seam round the front after three washes. The torque was there all along, the setting had hidden it, and the water gave it back — which makes spirality a finishing failure rather than a knitting one.

finishing · Memory How hard a fabric is to bend, per unit width. Bending rigidity in micronewton metres per unit width, computed the same way for eight woven cloths and for a jersey in each of its two directions: the yarn's own rigidity, times the length of yarn per unit area, times the fourth power of the cosine of the angle each element makes with the bending direction. The knit lands inside the band of the woven cloths rather than below it, which is worth knowing because a knit is usually called the softer fabric. It is not softer to bend; it is softer to stretch, by three decades. What it does have is direction: 2.17 to one between its two axes, where a balanced plain weave is near one, and the soft axis is the one a jersey rolls about at its top and bottom edges.

What friction has to hold in a relaxed knit

A knit's bending energy slopes away from the fabric everybody measures, so something is holding it there. Along its courses friction holds comfortably. Along its wales the driving force is exactly the contact force, so the whole balance collapses to one condition — the friction coefficient must exceed a half — and no yarn in this collection reaches it.

mechanics · Friction The section the fabric asks for, beside the one the model drew. A 24.2 tex cotton yarn in cross-section, at 900 times life size. The circle is what every solve in this collection has assumed: a diameter of 0.184 mm from the count and the packing factor. The ellipse has the same area and a minor axis of 76% of it, which is the closest the fabric's own adjacent courses come to one another — 0.140 mm. Nothing about that number was fitted to a fabric. It falls out of a solve that knew nothing about flattening, and it lands inside the range the trade reports for yarn in cloth, which this collection has carried as a free parameter ever since it first put a number on a sett.

The diameter that does need a state

A fabric dimension quoted without its relaxation state is not a measurement. The rule was applied to the two plan dimensions and then to the thickness, and it was never applied to the one dimension that is not the fabric's at all — the yarn's.

finishing · State

Named alongside it

The objects these essays reach for when they reach for this one.

RelaxationElasticaPermanent setContact forceFrictionSpecificationMunden constantsStitch densityBending energyCloth thicknessEnergy minimumHysteresis

All concepts