Textile Structure
how cloth is put together
Concept

Gating — where it appears

How two needle beds line up: rib gating sets the back needles half a pitch along, interlock gating sets them opposite and sharing a space. It decides which needles can hold loops at once, and therefore which structures the machine can knit at all.

Named by 3 essays across one field — each of them below, with the objects they name alongside it.

rib-float in section. A two-bed structure seen in section across the wales, over 3 repeats of course 1. The front bed's loops sit on the upper line and the back bed's on the lower one, offset by 0.5 of a needle pitch because the gating is rib. Of the 2 floats in the repeat, 2 lie in the gap between the beds and 0 on a surface. The upper panel is the fabric at the machine and the lower one is the same course with the beds closed up, which is what happens when the fabric is cast off — and neither panel is a relaxed fabric, because the loops are drawn as arches of one size and a real one settles wherever the yarn's bending leaves it.

A second bed changes what a float is

Every float so far has been on a surface, because every knit so far has had one needle bed. Put a bed behind it and the yarn runs in the gap between them — and over the whole enumeration of two-bed structures, 1,248 floats of 1,272 lie inside the cloth, on no surface at all.

knits · Two-bed tubular, as a graph of its wales. Every wale of tubular as a node — 2 on the front bed and 2 on the back — with one chain per course joining everything that course takes yarn on, because a course is one traverse of one yarn. The nodes are filled by which component they fall into. This structure comes out as 2 fabrics: F0+F1 and B0+B1. The same answer is obtained a second way, by walking every partition of the wales and asking whether any course straddles it, and the two are required to agree.

Does a double jersey hang together

Two beds knitting with nothing passing between them are two fabrics that happen to have been made at once. Of 6,561 two-bed arrays, 1,135 are fabrics and 50 of those are two fabrics — and 28 of the 50 split across the beds rather than along them, so neither half is a layer.

knits · Two-bed Which knitted structures spiral, at a twist factor of 4.0. A yarn leaves the spinning frame with a torque it has not been allowed to release, and a loop knitted from it leans. The lean per unit of twist factor above balance is measured; what is counted here is the structure. A loop on the front bed and one on the back are mirror images, so their torques have opposite signs, and a fabric that knits equally on both beds nets to zero whatever the yarn is doing — which is why 1x1-rib, 2x2-rib, interlock do not spiral and plain, half-cardigan, tubular do. The count has to be made per fabric and not per structure: an interlock and a tube both knit equally on the two beds, and they are opposite cases, because an interlock's two components each straddle the beds while a tube's are each wholly on one. The integrity criterion, which asks what nothing holds together, is what tells them apart. What the bars cannot show is the tube's second face, which leans the other way.

A jersey leans because its yarn still turns

A single-jersey T-shirt comes back from the wash with its side seam spiralling round the body, and a rib does not. The difference is not the yarn: it is a count. Loops on opposite beds are mirror images, so their torques oppose, and a fabric that knits equally on both nets to zero whatever the yarn is doing.

knits · Spirality

Named alongside it

The objects these essays reach for when they reach for this one.

InterlockWaleCourseNeedle bedStitch notationTwo-bedCensusCloth integrityConnectivityFloatInterior floatLayers

All concepts