Textile Structure
how cloth is put together
Concept

Curl — where it appears

A cut edge of a single-jersey knit rolling towards one face, because the loop's head and its legs sit at different depths. It is a consequence of the fabric's asymmetry through its thickness rather than of anything about the yarn.

Named by 8 essays across 2 fields — each of them below, with the objects they name alongside it.

Why one curls and the other does not. A knitted loop is not symmetric front to back. Worked every course the same way, the asymmetries add along the edges and the fabric rolls; worked alternately, consecutive courses point opposite ways and cancel.

Why stockinette curls

A knitted loop is not symmetric front to back. Work every course the same way and the asymmetries add up along the edges; alternate them and they cancel. That is the whole difference between a fabric that rolls and one that lies flat.

knits · Knit 1×1 rib — alternate wales to the back. A knitted fabric seen in section across the wales. Alternate wales pulled to the back fold the fabric like a concertina, so its relaxed width is a projection; pulling it wide unfolds the section and no yarn changes length while it happens.

Rib and interlock

A rib fabric is a plain knit folded like a concertina, and its enormous widthwise stretch is the fold opening out. Nothing in it is elastic, and the extension available is a cosine.

knits · Knit Why a cuff is ribbed. The force a knit pulls back with, over the range a cuff is used across. It rises the whole way — 0.79 N per metre at 23% to 3.38 at 104% — and it is small throughout, which is the combination a cuff needs and almost nothing else supplies. A rib gets its extension by geometry, folding alternate wales to opposite faces so that its relaxed width is about half its opened one, and it gets its recovery from the loop reconfiguring. Neither is the yarn stretching, which is why a cuff made of a fibre with no elastic recovery at all still works.

A rib pulls back on a force the loop supplies

A cuff has to give a great deal at almost no load and come back reliably, and no ordinary material does both. A rib gets its extension from folding, which is geometry, and its return from the loop reconfiguring, which is now a computable force — under four newtons a metre over the whole range a cuff works across.

knits · Two-bed Which knitted fabrics lie flat, counted from the structure matrix. The curl balance of every named two-bed structure this site holds, with a tuck counted in full on the bed that took its yarn: the yarn a repeat puts on the front bed minus the yarn it puts on the back, over the total. A fabric lies flat exactly when it is zero, and the criterion has to put single jersey at one end and a one-by-one rib at the other or it is worth nothing — which it does, at 1.00 and 0.00. What it is for is the rest: a tubular fabric balances because it is two jerseys facing opposite ways, both cardigans balance because a tuck holds yarn on the bed that took it, and half-milano and a three-by-one rib come out front-heavy — which is what they are and what they do. 6 of the 13 structures curl.

Which knitted fabrics lie flat

Curl was explained here by counting face changes between courses, which works for stockinette and garter and reaches nothing else. The same question turns out to be a signed sum over a structure's own grid — and it answers for every fabric a two-bed machine can make, including the ones nobody has a rule for.

knits · Two-bed How much of a fabric's yarn crosses between the beds. The share of half periods that cross from one bed to the other, read off each structure's own traverse rather than quoted. It is the mechanical difference between these fabrics in this account: a half period that crosses climbs the whole bed gap and one that does not climbs a yarn diameter. Single jersey and a tubular fabric come out at zero — the tubular one because its two faces are made on separate courses and never meet — and a one-by-one rib comes out at one, with every sinker loop crossing. A two-by-two rib is at a half, which is the number a reader would guess and is here counted.

A tube and an interlock balance for different reasons

Two structures come out identically flat on a signed count and are as unalike as two knitted fabrics get. One is two jerseys that curl in opposite directions and are joined at the edges; the other is a fabric whose every course crosses. Telling them apart needs a different question asked of the same grid.

knits · Two-bed Where a loop's bending actually is. Half a stitch — from the crown of a needle loop's head to the bottom of the next sinker loop — with the curvature at every station drawn as a spine standing off the curve, in units of one over the yarn diameter. The centre line is drawn as a line rather than at the yarn's own width here, because the subject of this figure is the curvature and a yarn drawn at true width covers its own spines. The peak is 1.14, at 28% of the way along, and the curvature varies smoothly from one end to the other with no jump anywhere. That smoothness is the whole point: Peirce's construction joins an arc of constant curvature to a straight line of none, so its bending moment steps at the join, and a step in moment is a point force no thread can carry. An elastica has no steps in it, which is why its forces exist at all and his do not.

What a loop model still cannot say

A planar rod with a natural curvature and point contacts gets a knit's forces, its modulus and its extension. It does not get torsion, it does not get the third dimension the interlacing actually needs, and it does not stop adjacent courses passing through one another — which is why its extension ceiling sits three times beyond any jersey.

mechanics · Elastica How hard a fabric is to bend, per unit width. Bending rigidity in micronewton metres per unit width, computed the same way for eight woven cloths and for a jersey in each of its two directions: the yarn's own rigidity, times the length of yarn per unit area, times the fourth power of the cosine of the angle each element makes with the bending direction. The knit lands inside the band of the woven cloths rather than below it, which is worth knowing because a knit is usually called the softer fabric. It is not softer to bend; it is softer to stretch, by three decades. What it does have is direction: 2.17 to one between its two axes, where a balanced plain weave is near one, and the soft axis is the one a jersey rolls about at its top and bottom edges.

A knit bends more easily along its courses

A jersey is not a soft fabric to bend. Computed the same way as this collection's woven cloths it lands inside their band, at the limp end — and the useful number is not the magnitude but the direction: two point two to one between its two axes, with the soft one being the axis it rolls about.

mechanics · Knit How little eccentricity a curl needs. The radius a jersey would curl to, against how far the fabric's neutral surface fails to bisect its loops. The model's own loop is bisected exactly — its crest sits half a diameter behind the mid-surface and its trough half a diameter in front — so it carries no curling moment at all, and the curve here is what any departure from that would buy. The moment is proportional to the eccentricity, so one solve settles the whole curve. A radius of three millimetres, which is about what a fine jersey rolls to, needs 5.6% of a yarn diameter — 9.4 micrometres on a yarn 167 micrometres across. That is why curl is easy to see and hard to model: the whole of it lives inside a rounding error on the geometry. Only the course-wise edges are drawn, because bending about the other axis turns the thread's end tangents out of the fabric and a free thread given turned ends buckles clean out of it — 3.2 times the fabric's own thickness, for 37% off its energy. That configuration is not available to a thread with neighbours, so the second moment is refused rather than computed.

How little asymmetry a curl needs

A model with a thickness can finally be asked why stockinette rolls. It answers that it does not — its curling moment is exactly zero, by a symmetry — and the useful part is what that costs to break: five per cent of a yarn diameter buys the whole of the curl anybody has ever seen.

mechanics · Elastica

Named alongside it

The objects these essays reach for when they reach for this one.

RibElasticaInterlockLoop asymmetrySpecificationStockinetteAnisotropyBending energyBending rigidityLoop lengthNeedle bedTwo-bed

All concepts