Textile Structure
how cloth is put together
Concept

Contact threshold — where it appears

The pressure a hair layer can carry before a flat plate reaches the cloth's own crowns, which for a woven cotton is about a fifth of a kilopascal. Below it every contact result describes a surface nothing is touching; above it the bearing curve applies.

Named by 3 essays across 2 fields — each of them below, with the objects they name alongside it.

A yarn's diameter is a contour, not a length. The fraction of the space beside a 20 tex cotton yarn that is occupied by hair, against height, grossed up from the modelled population by the measured split between the long and short populations. At the yarn's own surface it is 8.9% — the layer is almost entirely gap — and it falls away exponentially from there. Every instrument that reports a yarn diameter is picking a contour of this curve, and the contours are far apart: a threshold that needs half the space filled is never met at all, one that needs a twentieth is met at 355 µm, and a hair counter triggers out at 2353 µm. The earlier model gave the layer a single thickness of 25 µm, which is a fair description of where most of the material is and wrong about its extent by more than a decade. What the curve cannot say is which contour any particular instrument uses, which is a fact about the instrument.

A yarn has a diameter for every instrument

Conservation of volume gives a yarn one diameter and every other route gives a different one. The disagreement is not experimental scatter: a yarn's outside is a coverage that falls away exponentially, and each instrument stops at whatever contour of it will trigger the instrument.

cloth · Hair layer At 0.1 kilopascals the plate is standing on hair. A flat foot pressed onto sheeting at 0.1 kPa, over 3 mm of cloth. It stops 25 µm above the cloth's own crowns, because that is where the hairs it is bending can carry the load: of the 10 hairs drawn, 9 reach higher than the foot and are laid over under it, and the rest are untouched. The vertical scale is set by the approach and not by the layer — 5188 pixels to the millimetre off the cloth against 192 along it — because the foot's height above the crowns is tens of micrometres and the layer it stands in is more than a millimetre, so a picture at one scale shows the second and not the first. The thickness reported is 0.432 mm against 0.382 mm for the cloth itself, so 12% of the reading is a population and not a fabric. The hair layer carries up to 0.23 kPa before the foot reaches the crowns at all. A laid-over hair is drawn as two straight segments where a real one is an elastica: the corner is a convenience and the height it turns at is the measurement. What the picture cannot show is that a bent hair leans on its neighbours, which the arithmetic behind it does not know either.

A light touch never reaches the crowns

This collection found that a plain weave touches at points and every other cloth touches along lines, and that the difference is an exponent rather than a factor. It is a real result about a real surface, and at the pressures a fabric is actually touched at, nothing ever reaches that surface.

cloth · Contact A thickness is a property of the pressure it was measured at. What a gauge reports for sheeting against the pressure it presses with. At 1 kPa it reads 0.382 mm, which is the cloth; at 0.02 kPa it reads 0.555 mm, which is the cloth plus 87 µm of hair on each face. The difference is 31% of the reading and it is not a compressibility: nothing in the fabric has been squashed, the foot has simply stopped in a different place. That is why every thickness standard specifies its pressure to two figures, and why comparing a thickness from one standard with a thickness from another is comparing two different measurements of two different objects. The dashed line is the cloth's own geometric thickness, which no reading below the crossover ever reaches.

A compression curve is two laws in series

A published fabric compression exponent is a fitted number with no derivation attached, and this site has already said why: the range it is fitted over straddles two regimes. One of them turns out not to be in the cloth at all.

mechanics · Compression

Named alongside it

The objects these essays reach for when they reach for this one.

Hair layerBearing curveBuckling loadCanopy criterionCloth thicknessContact pressureHair coverageCompactionCompression energyCover factorCrown heightCrown line

All concepts