Textile Structure
how cloth is put together
Concept

Twill — where it appears

A weave whose column slides a fixed number of picks from one end to the next, so the interlacings line up in a diagonal no thread follows. The diagonal is a feature of the whole arrangement rather than of any thread, and its angle depends on the two setts as well as on the step.

Named by 11 essays across 4 fields — each of them below, with the objects they name alongside it.

The 5-end satin. The 5-end satin on point paper, a filled square meaning the warp is on the face. Its longest float, its interlacing count and the number of separable cloths it describes were all counted from the matrix that drew it.

Plain, twill and satin

Three rules, and everything else in weaving is a variation on them. What separates the three is not appearance but one trade — how often a thread changes face against how far it runs when it does not.

weaves · Foundation weaves A 2/2 threading, run out to three widths. The same four shafts threaded for repeats of increasing width. The threading line runs up and back down; the harness never grows, and the number of ends it carries is bounded by the loom's width rather than by its shafts.

The harness does not grow

Nearly every account of a loom says the shaft count limits the repeat. It limits the repeat of a straight draw, and of nothing else — a reversed twill on ninety-six ends weaves on the same four shafts as the twill it was made from, and the ratio grows without bound.

fancy · Shafts The 2/2 twill. The 2/2 twill on point paper, a filled square meaning the warp is on the face. Its longest float, its interlacing count and the number of separable cloths it describes were all counted from the matrix that drew it.

The diagonal is not a thread

A twill's diagonal is the most looked-at feature in weaving and the most misdescribed. No thread in the cloth runs diagonally. What runs diagonally is a pattern of which thread is on top, which is a different sort of object.

pattern · Pattern What a float limit of 4 leaves. For each repeat, the fraction of the distinct twills on it whose longest float is within the limit. The constraint is usually stated as a rule about a drawing; it is really a statement about how much of the catalogue exists, and the catalogue shrinks as the repeat grows.

Designing to a float limit

Every jacquard designer works to a rule of the form nothing longer than four. It reads as a constraint on a drawing. It is really a statement about how much of the catalogue exists, and the catalogue shrinks as the repeat grows.

weaves · Float What a raising machine can catch in a 2/2 twill. The draft with every weft float long enough for a raising wire to lift marked on it. The teeth need an unsupported length of thread on the surface, so a cloth in which every thread is bound at every crossing offers them nothing at all — which is why a napped fabric is always a twill or a satin and never a plain weave.

Only a float can be raised

A raising machine drags wire teeth across a cloth and pulls fibre ends up into a nap. The teeth need something to catch, and what they catch is a float — so which fabrics can be napped at all is a question about the matrix, decidable exactly, and the answer over the whole four-by-four census is two.

finishing · Nap How many twills there are. Every way of writing a twill on each repeat, reduced by the two operations that leave the cloth unchanged: starting on a different pick, and turning it over. What is left is the number a designer actually chooses between.

How many twills a repeat admits

Sixty-four ways of writing a twill on eight ends, and twenty-one twills. The difference is two operations that leave the cloth unchanged, and a catalogue that does not quotient by them is counting notations rather than fabrics.

weaves · Foundation weaves How much a draft agrees with itself. On the left the draft; on the right its correlation at every offset, one cell per offset, with the offset of nothing at the top left. Warp-up counts as plus one and weft-up as minus one, so the number in each cell is agreements minus disagreements out of 64. The correlations away from the origin sum to exactly -64, whatever the draft — structure can be moved about and not removed.

A crepe cannot be structureless

A crepe weave is designed to have no line in it anywhere. The correlations of a draft with itself sum to a number fixed by the repeat alone, so structure can be spread and never removed — and on eight ends the floor turns out to be half the repeat, set by a fact about binary words with nothing textile in it.

weaves · Texture weaves The basic weaves at four by four. Plain weave and the three twills a repeat of four admits, each drawn with its longest float and its layer count computed from the matrix. The fifth frame is empty: a satin needs a move coprime with its order and neither one nor one less than it, and four ends admits 0 such moves. So the smallest interesting repeat contains two of the three weaves every manual begins with.

The three basic weaves do not generate the rest

Every weaving manual opens with the same sentence: there are three basic weaves, and everything else is derived from them. The complete catalogue of the smallest interesting repeat is in hand, so the claim can be checked instead of repeated. Starting from plain weave, every twill and every satin, and applying every derivation the manuals name, reaches nine of the 426 cloths that exist there.

weaves · Derivation What combination adds to the manuals' reach. The three counts. The manuals' own operations on their own seeds reach 9 of the 426 four-by-four cloths. Admitting stripes, checks and figures of any two seeds — 17,787 constructions, of which 177 repeat inside four ends and four picks — takes it to 28, a gain of 19. That is a threefold rise and it leaves 398 cloths unreached, which is 93.4 per cent of the catalogue. What the chart cannot show is combinations of combinations, which are excluded on purpose: the closure's seeds have to be what a chapter actually teaches or the count measures something else.

What combining two weaves reaches

The account before it found that the manuals' own operations on their own basic weaves reach nine of the 426 four-by-four cloths, and recorded one exclusion honestly: combination — striping, checking and figuring — was left out, because a combination of two four-end weaves is eight ends wide and so is not a four-by-four cloth at all. Admitting it triples the reach and leaves ninety-three per cent of the catalogue outside.

weaves · Derivation A 3-pick fold across a 8-end satin, move 3. A 8-end satin, move 3 on point paper with a fold 3 picks wide drawn across it at pick 3. A warp end's crimp is made where it turns from over to under, and the dots mark the turns that fall inside the fold. Averaged over the ends there are 0.75 of them, and 4 of the 8 ends in the repeat have none at all — those ends are marked with a line, and each of them crosses the fold dead straight with no crimp to give up. Over every fold position, 50.0% of end-and-place pairs are like that. What the drawing cannot show is what happens to those ends instead, which is that the whole of the fold's length difference goes into their fibres.

How sharply a weave lets a cloth fold

A fold's length difference is paid for out of crimp, and crimp is not spread evenly along a thread — it is made at the interlacings and nowhere else. So what a fold has to spend is not the weave's average crimp but whatever is inside the few picks the fold crosses, and in an eight-end satin half the warp ends have nothing there at all.

weaves · Float 8×2 and 2×8 over every origin. Two grids of the 16 relative origins of 2/2 twill under 8-end satin, the row being how many picks the ground is started along and the column how many ends. The left grid is the census at a block 8×2, the right at 2×8; a square is filled where some of the 65,536 profiles separate. 8×2 fails at 8 origins and 2×8 at 8; both fail at 0 and neither at 0. Turning the cloth over and through a right angle sends each origin to another, and the letters mark where: every letter lands on a square with the same answer, so the two shapes are one census read at relabelled origins.

A turned block is a moved origin

An eight-end satin figured on a 2/2 twill fails on 55,536 profiles at a block eight picks by two ends and on none at two by eight, and that was read as a property of the block's shape. Sweep the relative origin as well and the two shapes trade places: at every one of the sixteen origins exactly one of them fails, and over the sixteen they fail equally often. A shape asymmetry that no origin removes exists, and it needs a satin whose move squared is not one.

pattern · Blocks

Named alongside it

The objects these essays reach for when they reach for this one.

RepeatSatinFloatCensusPoint paperCloth integrityDerivationInterlacingPlain weaveReversalAppearanceAutocorrelation

All concepts