Textile Structure
how cloth is put together
Concept

Resting band — where it appears

The range of states friction can hold a fabric in short of its own minimum, which is why a relaxed cloth is not at equilibrium. Agitation narrows it, and it needs two friction coefficients rather than one to be a band at all.

Named by 2 essays across 2 fields — each of them below, with the objects they name alongside it.

Stick, slip, and the ratio between the two coefficients. The force in a thread as a cloth is agitated, with a static coefficient of 0.300 and a kinetic one of 0.225 — a ratio of 0.75, which is what fibre on fibre measures. The force climbs until it reaches the static limit, the contact breaks away, and while it is sliding it resists only at the kinetic limit. So a cloth that is being shaken can be left anywhere in the narrower band, and a cloth at rest anywhere in the wider one. What the trace cannot show is how much this buys: the band does not narrow in the ratio of the coefficients, because the restoring force stiffens away from the minimum, and the real narrowing is nearer 0.87 than 0.75.

Two coefficients, not one

Every friction on this site is a single number, and the account of why a cloth relaxes better when it is agitated depends entirely on there being two. Separating static from kinetic changes what a resting state is: a cloth at rest is held by one coefficient and a cloth being shaken by the other, and the band it can be left in narrows — by less than the ratio, because a cloth's restoring force is not linear in its extension.

cloth · Friction The resting band with two coefficients in it. The range of extensions a sheeting can be left in, at rest and while being agitated, at three ratios of kinetic to static friction. The upper bar of each pair is the stuck band, held by the static coefficient; the lower is the band a cloth being shaken can be left in, held by the kinetic one. Agitation narrows the band but by less than the ratio of the coefficients: at 0.75 the narrowing is 0.868. The restoring force is not linear in the extension, so cutting the friction by a quarter does not move the band's edges by a quarter of the way in. What the bars cannot show is where a given piece of cloth actually stops inside its band, which depends on which side it came from.

Why agitation helps a cloth relax

Every standard relaxation procedure agitates: tumble it, wash it, steam it, work it. The explanation given is that agitation lets the fabric find its own dimensions, which is true and is not a mechanism. The mechanism is that a sliding contact resists less than a stuck one — and putting a number on it shows the effect is real, is smaller than the obvious arithmetic suggests, and does not account for what a relaxation procedure achieves.

finishing · Friction

Named alongside it

The objects these essays reach for when they reach for this one.

AgitationCrimpFrictionHysteresisKinetic frictionRelaxationStatic frictionContact forceDimensional stabilityPull-outShrinkage

All concepts