Textile Structure
how cloth is put together
Concept

Kinematics — where it appears

What a mechanism can move through, with no forces in the account, which is how a woven cloth's shear is treated here. Adding forces changes what the model can say rather than correcting it, which is why this site kept the two accounts apart for a long time.

Named by 4 essays across 2 fields — each of them below, with the objects they name alongside it.

A trellis sheared 30°. The net at an angle, with every thread segment exactly the length it started at. The extension along the diagonal is the bias stretch, and it is a change of shape rather than a change of length.

The bias is a mechanism

Cloth cut at forty-five degrees stretches by a third and springs back, while the threads in it stretch by nothing at all. Almost every explanation given for this is wrong, and the right one is not about elasticity.

mechanics · Bias The angle a pressurised hose wants. A fixed length of yarn wound on a cylinder at a stated angle, with the radius and length the geometry gives, beside the volume it encloses as the angle varies. The maximum is at arctan √2 — 54.74° — with no material constant anywhere in it, and the same angle comes out of balancing the hoop and axial stresses, which is a different calculation with the same answer.

The angle a hose wants

A braided hose has one angle at which pressure neither lengthens it nor shortens it, and the angle is arctan √2 — 54.74° — with no friction coefficient, no modulus and no fitted constant in it. Two arguments that share no algebra arrive at the same number, and which side of it a hose was braided on decides which way it moves.

applied · Bias Everywhere a muslin can go. Every state a muslin of 24 × 22 threads per centimetre in 20 and 20 tex can reach without a yarn changing length, solved from Peirce's plain-weave geometry. The set is a curve and not a region: 6.59 per cent of extension is available along the warp, and reaching it costs 21.82 per cent of the width.

Pulled both ways, only one can give

A cloth at constant thread length has one degree of freedom, so its reachable states are a curve rather than a region. Equal extension in both directions meets that curve at exactly one point — the state the cloth is already in — so the amount available is nought.

mechanics · Tensile A ratio that will not hold still. The exchange rate between the two directions for 4 cloths, against how far each has been extended along the warp. Every curve is above one half everywhere it is drawn, and every curve rises — so a single number for a cloth's ratio has to name the state it was read at, which a material's ratio does not.

A cloth's Poisson ratio is not a material's

The ratio of a cloth's contraction to its extension has a name everywhere else in mechanics, and it breaks every rule the name comes with — above one half on all eight cloths measured, doubling across a four per cent span, and not reciprocal between the two directions.

mechanics · Tensile

Named alongside it

The objects these essays reach for when they reach for this one.

InextensibleBiasConstant length locusCrimpCrimp interchangePeirce's geometryPressure vesselShearAnisotropyBiaxialBraidExtension

All concepts