Textile Structure
how cloth is put together
Concept

Fibre diameter — where it appears

The width of a single filament, which sets how many are in a yarn's cross-section and therefore how wide the bending bracket is. It is also what swells in water, and the yarn's own diameter follows it only once the packing has been accounted for.

Named by 5 essays across 4 fields — each of them below, with the objects they name alongside it.

A cotton fibre dry and wet. One cotton fibre in its dry state and saturated with water, both drawn at the same scale in both directions. It is 20% wider and 1.2% longer, so its cross-sectional area rises by 44% if the section stays similar to itself. The length difference is drawn and is nearly invisible, which is the point: a swelling that were the same in both directions would make a cloth bigger and change nothing about its structure, and this one changes every ratio of a diameter to a spacing in the cloth. What the drawing cannot show is the section: a cotton fibre is not a cylinder, and the directly measured area swelling of 40% to 42% does not agree with the square of the width change, which is a fact about the fibre.

What water does to a thread

A cotton fibre in water is a fifth wider and a hundredth longer. If it grew equally in both directions a wet cloth would simply be a bigger cloth and nothing structural would follow; because it does not, every ratio of a diameter to a spacing in a cloth moves, and they all move the same way.

cloth · Water A yarn's voids against its fibres' swelling. One cotton yarn's cross-section at a packing factor of 0.60, drawn dry and with every fibre swollen by 20% while the yarn's own outline is held. The fibres now occupy 0.864 of the section, which is above the 0.75 a heavily compacted assembly reaches and above the 0.65 of a spun yarn, so the yarn cannot stay this size: it must grow by at least 7.3%. What the drawing cannot show is disorder — the fibres are laid on a lattice here to make the areas exact, and a real yarn's fibres are neither round nor evenly spaced, which is why the bound is quoted over three packing limits rather than at one.

A yarn's voids are not enough

A ring-spun cotton yarn is sixty per cent fibre and forty per cent air, and its fibres gain forty-four per cent of area in water. The obvious thought is that the air takes it. The arithmetic says the air cannot, and gives a floor on how far the yarn itself must grow with no measurement of a yarn in it anywhere.

cloth · Water Cover, dry and wetted. Warp cover for every cloth in the table when its threads swell by 20% and its spacings are held, with the dry value and the sett at which the swollen threads touch beside each bar. Cover is a diameter over a spacing and only the diameter moves, so every cover is multiplied by exactly 1.20 and every jamming sett divided by it — an identity rather than a result, and the one statement in this ladder a reader can check by hand. No cloth here reaches a cover of one, so none of them jams laterally on wetting; the closest is the sheeting at 0.628. What the bars cannot show is the through-thickness condition, which the sheeting fails at a swelling of half this one.

A wet cloth is set closer than it was woven

Cover is a diameter over a spacing. Wetting moves the diameter and does not move the spacing, so every cover factor on this site is multiplied by exactly the swelling ratio and every jamming sett divided by it — which is an identity, and the one statement in this ladder a reader can check by hand.

setting · Sett Cotton and viscose in every column this site carries. The two cellulosic fibres compared across every constant on this site. Both are cellulose at 1.52 g/cm³, both are given a modulus of 8 GPa and a fineness of 1.7 dtex, so a 20 tex yarn of either has the same diameter to the last figure — and therefore the same crimp, the same cover, the same jamming sett and the same bending bracket. Every geometric result on this site is the same number for the two fibres. Water separates them twice: viscose swells 1.75 times as far across and loses half its strength where cotton gains a tenth. What the table cannot show is why, which is a question about how cellulose is arranged inside a fibre and is not in this collection.

Water tells two fibres apart

Cotton and viscose are the same material by every constant this collection carries. Same density, same modulus, same fineness, so the same diameter at every count and the same crimp, cover, jamming sett and bending bracket. A wash separates them by a factor of two, and it is the only thing here that can.

mechanics · Yarn stiffness Thirty micrometres is a buckling load. The wool fibre diameter at which a protruding end reaches the measured threshold for prickle, against how far it protrudes. A fibre end pressed against skin is a column held at the cloth and free to slide at its tip, so it buckles at 20.19EI/ℓ² and carries no more load than that; below the threshold it bends away and is felt as touch, above it the load stands and is felt as pain. At a two-millimetre protrusion — which this site's own hair model puts in the top fifth of a wool's population — the threshold diameter is 32 µm, bracketed at 29–34 by the range of the measured force. Neither the thirty micrometres nor the two millimetres was put in. The band is the force bracket, and the fourth power in I = πd⁴/64 is what makes the boundary sharp: at a mean of 21 µm and a spread of 24%, 3.2% of the fibres are over it, and it is that few per cent that decides whether a garment can be worn.

Prickle is a buckling load

The wool trade specifies comfort against skin by the percentage of fibres coarser than thirty micrometres, and the thirty is a measured boundary with no derivation attached. It is a column formula: solve for the diameter at which a protruding fibre end stops bending away and starts standing its ground, and thirty micrometres falls out.

applied · Prickle

Named alongside it

The objects these essays reach for when they reach for this one.

MoistureSwellingPacking factorViscoseCover factorCrimpRegainAnisotropyBending rigidityBoundBracketBuckling load

All concepts