Knit — the series · Textile Structure

The loop

A knit is one thread bent into loops, each drawn through the loop below. Nothing in it is straight, which is why it stretches in every direction while a woven cloth stretches only at an angle.

part 1 · knits

Why one curls and the other does not. A knitted loop is not symmetric front to back. Worked every course the same way, the asymmetries add along the edges and the fabric rolls; worked alternately, consecutive courses point opposite ways and cancel.

A knitted loop is not symmetric front to back. Work every course the same way and the asymmetries add up along the edges; alternate them and they cancel. That is the whole difference between a fabric that rolls and one that lies flat.

part 2 · knits

One break, two outcomes. The same single break in a knit and in a weave. In the knit nothing holds the loop above the break, so the failure climbs the wale; in the weave every other thread is still held by the threads crossing it, and one thread comes loose.

Ravel, fray and run

Cut a woven cloth and one thread comes loose. Break one loop in a knit and every loop above it follows. The two structures fail in opposite ways, and the reason is topology rather than strength.

part 3 · knits

1×1 rib — alternate wales to the back. A knitted fabric seen in section across the wales. Alternate wales pulled to the back fold the fabric like a concertina, so its relaxed width is a projection; pulling it wide unfolds the section and no yarn changes length while it happens.

Rib and interlock

A rib fabric is a plain knit folded like a concertina, and its enormous widthwise stretch is the fold opening out. Nothing in it is elastic, and the extension available is a cosine.

part 4 · knits

Four ways a fabric gets longer without stretching. Extension available from each mechanism, computed from the geometry that provides it. None of these numbers involves a yarn changing length; every one of them is a shape changing, and they differ by an order of magnitude.

Why a knit recovers and a woven does not

Four fabrics get longer without a single yarn stretching, and the four mechanisms are worth wildly different amounts. Three of them are recoverable and one is very nearly not, and which is which follows from where the extension came from.

part 5 · knits

The loop that costs nothing to extend. A plain knitted loop at rest and extended by 35 per cent, with the arcs marked. The arcs' radius is the diameter of the yarn the loop wraps, 0.167 mm, and it is set by contact rather than by the fabric's dimensions — so extending the fabric lengthens the legs and bends nothing further. The bending energy is 0.0176 N·mm at both, and the model therefore asks no force at all for an extension a woven cloth would refuse. What the drawing cannot show is what a real knit's first few per cent do cost, which is friction and yarn flattening and is not a bending property.

A knit is soft because it bends

Ask the same energy question of a woven cloth and a knitted one and the answers are not different by a factor — they are different in kind. A woven cloth's bending energy changes the moment it is extended. A knitted loop's does not change at all, exactly, over the whole of its extension, because its arcs are held to a radius by contact rather than by the fabric's dimensions.

part 6 · knits

A knit's restoring force, and the column that does not move. A plain knit of 20 tex cotton at a loop length of 3.5 mm, over the extension range its own geometry admits. The bending energy stored in one loop is the same number at every extension — the loop's arcs are held to a radius by the thread they wrap rather than by the fabric's dimensions, so extending the fabric does not bend anything more. The frictional resistance at the interlocks is not zero: it is μ times the force pressing there, times 2.34 interlocks per millimetre of width. So a knit's resistance to extension is dissipative rather than elastic, which is why it does not spring back and why its dimensions depend on how much it has been agitated. What the rows cannot show is the interlock force itself, which this site does not have for a knit and which is recorded as missing.

What stops a knit extending

A knitted loop's bending energy does not change as the fabric extends — exactly, over the whole range its geometry admits. Something resists, and it is not stiffness. It is friction at the interlocks, which is dissipative rather than elastic, and that single fact accounts for why a knit does not spring back, why a softener changes its dimensions and why the constants its size is quoted with contain no yarn property at all.

part 7 · knits

A loop's cell, dry and wetted. One stitch of a 20 tex cotton jersey at a 3.50 mm loop, drawn inside the rectangle of one wale by one course that its own dimensions give. The thread is drawn at its own width, and it already fills 1.129 of the cell dry — more than the whole of it, which is what an opaque jersey looks like from above. Wetting takes it to 1.355. So the reason a knit does not build a swelling pressure is not that it has room; it is that its dimensions are a loop length times a constant with no yarn diameter in them, so there is no closure condition to fail. What the drawing cannot show is the third dimension: the legs lie over one another rather than overlapping in the plane, which is exactly why an occupancy above one is possible.

A loop has no closure condition

A woven cloth can run out of room: its two systems must supply its whole thickness between them, and past a certain swelling they cannot. A knit has no such equation, so no critical swelling and no pressure. The obvious explanation — that a knit is open and has somewhere to put the swelling — is false, and the arithmetic refuses it.

part 8 · knits

Munden's states against the fibre swelling. What a plain knit does between its relaxation states, beside the swelling of the fibre it is made of. Going from dry-relaxed to wet-relaxed a jersey loses 5.66% along its courses and 2.44% across its wales, and going on to fully relaxed it loses 9.1% and 7.0%. The fibre swells 20%. Two things rule the swelling out as the cause: it is several times the whole change, and the change is markedly anisotropic while a swelling enters both of a loop's dimensions through the same loop length. What the bars cannot show is what does cause it, which is friction — water lets the loops move to where the yarn's own bending had been trying to put them.

A knit's change of state is not its swelling

A jersey is smaller wet-relaxed than dry-relaxed, by 5.7 per cent along its courses and 2.4 across its wales. Water is obviously involved, so the swelling is the obvious cause. Two things rule it out, and both are properties of the constants rather than measurements of a fabric.

part 9 · knits

A plain knit's two relaxation steps. Munden's three relaxation states are usually given as three sets of constants. Read as a path they are two steps, and the two compose to the whole exactly — which is a real check, because the three sets were measured independently. The first step is the larger in the course direction and the smaller across the wales, and the second is 0.64 of the first lengthwise. That is the shape of a laundering series and it is the same mechanism: a fully relaxed state is reached by tumbling rather than by waiting, so what the standard specifies is a quantity of agitation and not a duration. What the bars cannot show is the loop length, which cancels out of all four numbers because every dimension of a knit is a loop length times a dimensionless constant.

A knit relaxes for as long as it is allowed to

Munden's three states are usually given as three sets of constants. Read as a path they are two steps, they compose exactly, and the second is not a smaller version of the first — the fabric shrinks twice as much along its courses as across its wales on the first step and rather less than half as much on the second.

part 10 · knits

A course is one thread and a warp is many

A woven fabric draws its warp from two thousand packages side by side, so a yarn's drift averages out across the width. A weft knit takes whole courses from one package, so the same drift becomes a band — and the standard remedy for that turns an invisible error into a visible one.

part 11 · knits

single jersey, as loops. Three courses of the same structure drawn as yarn. A knitted needle takes a new loop through the one below; a tuck takes the yarn into the loop below and leaves it on the needle, so that loop is held for another course; a miss floats straight past. Six needles is as many as a loop diagram can carry, which is why the array beside it exists.

A jersey has two surfaces

The face of a plain knit shows the legs of its loops, which run along the wale; the back shows the heads and feet, which run across it. So the two faces carry their crowns at right angles — the same situation as a damask's figure and its ground, in a fabric with no warp, no weft and no float.

part 12 · knits

Whether a cloth's hairs can reach one another. n_A λ² for each construction in this site's table — the hairs per square millimetre times the square of their own length, which is the pure number that asks whether a hair can touch its neighbour. It is a count times an area, so it has to be a pure number. Every one of them is under one, which means no ordinary woven cotton cloth has a hair layer at all: it has isolated whiskers on a bare surface. The dashed line is the threshold. The spread across the whole table is only 1.9-fold, because the density goes as the sett times the root of the count and those move in opposite directions as a cloth is made finer — so construction is almost powerless here, and everything that crosses this threshold does so by finishing rather than by weaving.

A knit gives up its fibres more easily

Knitwear pills and shirting does not, and the fibres are often the same fibres. The difference is a count of yarn per unit area and a pressure between threads, and both of them push a knit over a threshold that a woven cloth of the same yarn cannot reach.

part 13 · knits

What a knit gives when it is pulled

How far a knit stretches by rearranging its loops is usually given as a bound rather than a number, because saying more needs a loop with bending stiffness in it. Solved from the loop's own bending, the answer is a curve: soft for a hundred per cent, then stiffening by a factor of eighty as the yarn between two interlacings runs out of ways to be anywhere but straight.

part 14 · knits

The modulus a knit has instead of one

A fabric's stiffness in extension is usually its yarn's modulus with the geometry taken out. A knit's is not: dimensionally it can only be a bending rigidity over a length cubed, and the same yarn laid straight and parallel is thirty thousand times stiffer than the fabric made of it.

part 15 · mechanics

A jersey gets taller before it gets shorter

Pull a knit along its courses and the first thing it does is grow along its wales — by two per cent, over the first eighty per cent of extension, before it turns round and contracts. The transverse response changes sign, and there is no material in the explanation at all.

part 16 · knits

How hard a fabric is to bend, per unit width. Bending rigidity in micronewton metres per unit width, computed the same way for eight woven cloths and for a jersey in each of its two directions: the yarn's own rigidity, times the length of yarn per unit area, times the fourth power of the cosine of the angle each element makes with the bending direction. The knit lands inside the band of the woven cloths rather than below it, which is worth knowing because a knit is usually called the softer fabric. It is not softer to bend; it is softer to stretch, by three decades. What it does have is direction: 2.17 to one between its two axes, where a balanced plain weave is near one, and the soft axis is the one a jersey rolls about at its top and bottom edges.

A knit bends more easily along its courses

A jersey is not a soft fabric to bend. Computed the same way as this collection's woven cloths it lands inside their band, at the limp end — and the useful number is not the magnitude but the direction: two point two to one between its two axes, with the soft one being the axis it rolls about.

part 17 · mechanics

Everything a plain knit can be, at one loop length. Bending energy over the two spacings a plain knit has to choose, for a 20 tex cotton yarn at a 3.5 mm loop, as a multiple of the energy the fully relaxed fabric holds. Darker is more. The solid edge is where the straight line between two interlacings reaches the yarn between them — the geometry's own limit, with nothing elastic in it — and there is no state beyond it at any force. Munden's three relaxation states are marked, and the thing to see is that they are not in a hollow: they lie along a slope, in order, with the most completely relaxed of them the highest. An unset yarn would slide down and to the right until it met the edge. Real fabrics sit where they were left.

How far a knit could go if its yarn were the limit

The yarn in a stitch allows three hundred and twenty per cent course-wise extension before the straight line between two interlacings reaches the thread spanning it. A jersey jams at about a hundred. The factor of three is the finding: what stops a knit stretching is not the loop running out of yarn.

part 18 · knits

The force at an interlacing, which no longer lies in the fabric. A crossing of a relaxed jersey in section on the left, with the thickness expanded 3×, and on the right the contact force drawn at the angle the solve gives it — which is a true angle, unlike anything in the section beside it. The head of one course and the feet of the next lie one yarn diameter apart through the fabric, 0.167 mm, so the interlacing is not a point in a plane and the force at it is not in one either. It comes out at 38.30 mN a stitch, turned 11.75° out of the fabric: 37.50 mN along the wales, which is what friction has to hold, and 7.81 mN through the thickness, which is what holds the two faces apart. Divided by the area a stitch occupies the second is 15.1 kPa, or 113 mmHg — a pressure, and the quantity a compression measurement reports.

How thick a knit is

Two centre lines pass at a diameter and each has a radius on either side, so a plain jersey is two yarn diameters thick with nothing fitted. It does not depend on the gauge, it lands inside the band of this collection's woven cloths, and it is lower than any gauge will read.

part 19 · knits