Textile Structure
how cloth is put together
Concept

Move number — where it appears

How many picks a satin's mark advances between adjacent ends, which must share no factor with the repeat. It is a property of the usual construction rather than of the cloth, and dropping it brings back satins the coprimality argument appears to rule out.

Named by 11 essays across 3 fields — each of them below, with the objects they name alongside it.

Which satins exist. For each order, the moves that give a satin — a step coprime with the order, and not the steps of one and one less which give a twill instead. Four and six admit none, so no regular satin exists on four ends or on six.

There is no satin on six ends

Weavers have known it as a rule for centuries. It is a theorem with a one-line proof about common factors, and it rules out four ends as well.

weaves · Satin Which move to use on 16 ends. For each satin move the order admits, the distance from an interlacing to its nearest neighbour, measured on the torus the repeat lives on. A move whose interlacings crowd gives the eye something to find; the one that scatters furthest is the one to weave.

Which satins are worth weaving

Manuals give the moves a satin admits as a list, as though the survivors were interchangeable. They are not. Measure how far apart the interlacings sit and the traditional counter turns out to be the best move at the orders a weaver mostly uses — and to fail first at thirteen, where the square root names four and five scatters further.

weaves · Satin Where a stitch can hide on a 5-end satin face. The face weave on point paper, with a mark on every gap between two ends at which a stitch would be covered. 15 of the 25 positions in the repeat pass the cover rule, which is 60 per cent of them, and 5 of those can be used at once without two stitches sharing a pick or a gap.

Where a stitch can hide

One reversed intersection turns two cloths into one, and half the intersections in the repeat would do it. Almost none of them may be used — a plain-faced double cloth has nowhere at all to put a stitch, a five-end satin has fifteen places or none depending on which rule is asked, and two satins of the same order differ by a factor of two.

fancy · Double cloth The 6-end satin. The 6-end satin on point paper, drawn over 2 repeats with its marks joined in reading order inside the first. The joining segments are not parallel and not equal, because there is no number of picks the mark advances by at every end. That is what irregular means, and it is not visible in the squares alone. At this order there is one distinct satin and none is regular. The longest float is 1 in the warp and 5 in the weft, and the cloth is one cloth. What the drawing cannot show is that this is the only one: that is a statement about 36 arrangements and is made by the enumeration.

The six-end satin that does exist

There is no six-end satin, and this collection proved it in its founding essays. The proof is about satins with a move number. Drop that word — keep one mark per end and no two marks touching — and six ends has exactly one satin, unique up to where the repeat is started, and four ends still has none at all.

weaves · Satin The surface of an 8-end shading. The height of the cloth's own surface at each tone of an 8-end shading, for the two chains, on a sheeting at 0.50 N in the end. A thread presses on the thread it crosses only where it turns, so a region that turns more often is pressed more often and finishes thinner — and firmness rises towards the midtone of a shading. The spread chain therefore sinks 84 µm between its ends and its midtone and the consecutive chain 43 µm, with 2 of its steps at exactly one thickness against the spread chain's 0. The tone scale is level by construction and the surface under it is not. What the plot cannot show is the light: a step in the surface reads as a line under a raking beam whatever the tone is doing, which is why a relief nobody specified is visible at all.

A tone ramp is a valley, and the satin digs it

A shading's tone is exact and its lustre is measured; its thickness is neither, and nobody specifies it. A firmer weave is pressed harder at every crossing and finishes thinner, so an eight-end shading sinks eighty-four micrometres between its ends and its midtone — about a third of the cloth's whole thickness, on every cloth tried. Build the same chain on a twill instead of a satin and the sag is exactly nothing.

pattern · Shading The cyclic decomposition of a 4-end repeat. A 4-end repeat split into 4 parts, each with exactly one warp mark in every end and every pick, drawn above with each intersection numbered by the part it belongs to. That object is a Latin square, and it is what a shading actually requires: a tone step is a union of parts, so it has exactly k marks in every end and pick and its tone is k over 4 exactly. This is the cyclic square, which is what a satin's cosets write — and at four and six ends there is no satin, so the same square has to be reached through a twill instead. The drafts below are the tone steps in the best order this square admits, whose longest floats run 3, 1, 3. What the drawing cannot show is that the numbering is arbitrary: relabelling the parts gives the same square and a different chain, which is exactly the freedom the order is chosen out of.

A tone step does not need a satin

Every account of shading builds its tone steps out of satin cosets, and at four ends and at six there is no satin to build them from. The construction was never about satins: what a tone step actually needs is that every end and every pick carry the same number of marks, which makes a chain of them a Latin square. A four-end repeat has twenty-four of those and a six-end repeat 1,128,960.

pattern · Shading A lancé weft bound where the 8-end satin interlaces. A warp-faced 8-end satin on a move of 3, with an extra weft thrown after every ground pick and laid on the face over figures 12 ends wide and 28 ends apart. Between figures it is bound only on ends the ground already drops on an adjacent pick, 56 places in the drawn repeat, which leaves back floats of at most 4 and no binding on the face. The drawing is 40 ends by 16 picks and counts as 1 cloth. What it cannot show is whether a binding point counted as hidden is hidden in a real cloth, which depends on the yarns' contrast and on how closely the ground's floats cover it.

A brocade weft floats as far as the next figure

A brocade's pattern weft is a third thread, laid on the face only where the figure wants it. Thrown from selvedge to selvedge it floats on the back across the whole gap to the next figure, unless an end is dropped under it — and on a satin ground a dropped end hides only where the ground already interlaces. That fixes the shortest float that shows nothing, at the larger of the move and its complement less one, and puts the smoothest satin ground at odds with the best-bound brocade.

fancy · Jacquard The lattice under 8/3 and 10/3. Satin marks drawn as points over two repeats, the 8-end satin on a move of 3, whose closest marks are √8 apart and next √10, so its marks line up 45° off the weft; and the 10-end satin on a move of 3, whose closest marks are √10 apart and next √10, two equal directions at right angles and so no single diagonal. For a regular satin the blue arrow is the shortest lattice vector and the red the next, and the faint lines run along the shortest through every mark — the diagonal the marks make. What the drawing cannot show is whether an eye finds that diagonal in woven cloth, where the marks are not points but short interruptions of a float, and where the yarn's own twist lies across them at an angle of its own.

Most satins still have a diagonal

A satin is chosen so that no diagonal forms, and its move is ranked by how far apart its interlacings sit. But the interlacings of a regular satin lie on a lattice, every lattice has a shortest step, and the marks line up along it. Only when two shortest steps tie is there no row to follow — and between five and forty ends the best move manages that at twelve of the thirty-five orders.

weaves · Satin Which satin orders are row-free, from 5 ends to 40. Every satin order from 5 to 40, marked where the best move's lattice has two shortest steps of equal length rather than one — which is the condition under which the interlacings do not line up into a row. The row-free orders are 5, 10, 13, 15, 17, 24, 25, 26, 29, 34, 35, 37: twelve of the 35 orders that admit a regular satin at all. An n-end satin floats over n − 1, so a float limit is a ceiling on the order, and the ceilings for limits of 8, 12, 16 are drawn. What the strip cannot show is the spread, by which the orders are ranked and which decides which move is best within each.

A float limit leaves one row-free satin

A satin is chosen so that no diagonal forms, and an earlier essay found that most of them fail: the interlacings lie on a lattice, every lattice has a shortest step, and the marks line up along it unless two steps tie — which happens at twelve of the thirty-five orders from five to forty. The other constraint was named and not applied. An n-end satin floats over n − 1, so a yarn that will not carry a float longer than eight admits four orders in all, and exactly one of them is row-free: the five-end satin, which is the one everybody already weaves.

weaves · Satin What an irregular satin buys, order by order. For each order, the best regular satin's and the best irregular satin's scatter at the order's own best spread — the largest share of the closest pairs that point in one direction, where one is a line and less is a scatter. 5 ends: regular 0.50, irregular none at the best spread; 6 ends: regular none exists, irregular 0.25; 7 ends: regular 1.00, irregular 0.33; 8 ends: regular 1.00, irregular none at the best spread; 9 ends: regular 1.00, irregular 0.25; 10 ends: regular 0.50, irregular none at the best spread; 11 ends: regular 1.00, irregular none at the best spread. Irregularity buys something at 6, 7, 9 and nothing at the rest, and where it buys it scatters over four directions with no more than a third in any one. What the bars cannot show is whether a reader sees the difference, which is a question about a visual system.

An irregular satin scatters where a regular one lines up

A regular satin's marks lie on a lattice, so its closest pairs all run along one vector and make a row. An irregular satin has no lattice at all, so its closest pairs may point several ways at once — and at seven and nine ends, where every regular satin at the best spread has a row, an irregular one reaches the same spread with its closest pairs scattered over four directions and no more than a third in any one. At eight and eleven ends there is no such satin: the best spread is reached by regular satins alone, and irregularity has nothing to offer.

weaves · Satin 8/3 at 1.00 and 8/3 at 1.29, drawn in cloth. Satin marks drawn over two repeats at the spacings of a cloth, with the pick direction stretched by the sett ratio — ends per centimetre over picks per centimetre — and every closest pair of marks joined. 8-end satin, move 3 at a sett ratio of 1.000: closest pairs point one way: a row; 8-end satin, move 3 at a sett ratio of 1.291: closest pairs point 2 ways: no row. What the drawing cannot show is the float each mark interrupts, which is what a reader of the cloth actually sees.

A satin's row belongs to its sett

Point paper draws an end and a pick as equal squares, and every result about which satins have a row was taken there. A cloth is not square: it is set at so many ends and so many picks a centimetre, and in cloth the ties that made twelve satin orders row-free are ties between steps of different shape, which break at the first per cent of unequal sett. The reverse happens too. An eight-end satin, rowed on paper, has no row at exactly 1.291 ends per pick; an eleven-end at 1.265 and 1.528. And the only scatter that survives a range of setts is an irregular satin whose closest steps are mirror images — which nine ends has from the first per cent and ten only by 1.3.

weaves · Satin

Named alongside it

The objects these essays reach for when they reach for this one.

SatinScatterFloatEnumerationRegular satinSymmetryCensusCoprimeShadingToneBacked clothCloth integrity

All concepts