Textile Structure
how cloth is put together
Series

Shaping — the series

7 essays on one idea, from the one that introduces it to the one that assumes the rest.
  1. A fashioned edge at 1 wales in 2 courses. A knitted panel narrowing by 1 wale every 2 courses, drawn at the fabric's own aspect: a wale is 1.2791 times as wide as a course is tall, which is Munden's ratio of the two published constants. The edge therefore stands at 32.60 degrees from the wale, and that angle is the same in every yarn, at every gauge and at every loop length. Marks show where the 8 transfers fall.

    A fashioned edge has a quantised angle

    A knitted panel is shaped by transferring loops, so its edge steps by whole wales at whole courses and its angle is the arctangent of a fraction. The available angles turn out to be the same for every plain knit there has ever been — in any yarn, at any gauge, at any loop length — because the constant they scale by cancels the loop out. There are eighteen of them, and 16.67° between the last two.

    part 1 · knits
  2. How far a tube can be tapered by its loop. The same 10 wales by 10 courses of plain knit at the two ends of the usable loop range for a 20 tex yarn — 3.44 mm at the loose end and 2.80 mm at the tight one — drawn at a common scale in centimetres. On 240 needles the circumference falls from 192.0 cm to 156.0 cm, a taper of 18.8 per cent, and the fabric becomes 1.51 times as dense.

    A tube can only be shaped by its loop

    On a circular machine the needle count is the cylinder, so a seamless tube's circumference is its wale count times its wale spacing — and the wale spacing is the loop length over one constant. The loop is the only free quantity, the yarn bounds it at both ends, and what is left is a taper of 18.8 per cent bought at the price of a fabric half again as dense.

    part 2 · knits
  3. A short-row heel on 64 needles, laid flat. The 32 heel stitches of a 64-needle sock, each column drawn as the courses it was worked in during the short rows: nought at the heel's two edges, rising by four courses a stitch to 42 across the 11 stitches left at the turn. The cells are drawn at the knit's own aspect, a wale 1.2791 times as wide as a course is tall. The instep's 32 columns beside it are worked in none of the short rows. Down the back line the extra length turns the tube through 92.4 degrees, and the whole trapezoid is 65.6 per cent of the fabric a true bend of that angle would need.

    A heel turns a right angle because of the loop

    A sock's heel is knitted in short rows on half the needles until a third are left, then back out again. Down the back line that adds a length of courses, and a tube's back line longer than its front by that much has turned through π times two thirds over the loop's own aspect — 93.8 degrees, on any needle count, in any yarn. The trade's third is the loop's shape in disguise. What the rule does not do is make a bend: the heel supplies two thirds of the fabric a true right angle needs, and every missing stitch is on its sides.

    part 3 · knits
  4. Where a knitted disc is flat. The circumference a knitted disc grows per unit of radius, as a share of the 2π a flat disc needs, against the loop's aspect, for 4 wedges (flat at 1.2732), 10 every 2 rounds (flat at 1.2566). Wedges of short rows fall as the aspect rises and rounds with increases rise. The shaded band is the aspect of plain knit between its dry-relaxed value, 1.2500, and its wet-relaxed value, 1.2927.

    A knitted disc is flat at one shape of loop

    A disc lies flat only if its circumference grows by exactly 2π per unit of radius, and a knitted disc's growth is a count of loops in one direction over a count in the other. So it is flat at one value of the loop's aspect and no other. Knitted sideways in wedges of short rows the growth falls as the loop gets wider; knitted outward in rounds it rises. Four wedges and ten increases every two rounds are each flat at an aspect inside the range plain knit moves through when it is washed — and they cross it in opposite directions.

    part 4 · knits
  5. One gore of a 4-gore knitted ball, laid flat. A gore of 30 stitches from pole to pole, knitted sideways in short rows, drawn flat with its rows stacked at the plain-knit loop's fully relaxed aspect of 1.2791. Turned on the sine, its 10 row pairs turn at stitches 0, 1, 2, 3, 4, 5, 6, 8, 9, 11 from each pole — one stitch apart near the pole and further apart towards the equator — and its edge follows the width a sphere asks for. Turned one stitch every pair, the same gore is a diamond of 15 pairs, 1.50 times as wide at the equator. What the drawing cannot show is the fabric smoothing its own staircase edge.

    A knitted ball's short rows have to slow down

    A knitted disc needs one count to meet 2π; a sphere needs a count that follows a sine. Knitted sideways in gores, a ball's short rows must turn one stitch apart at the pole and ever further apart towards the equator — evenly spaced turns knit two flat discs joined at the rim. The pole is the disc again, so gores come in fours; the equator's row pairs have to come out whole, so only some sizes knit round; and a wash moves a four-gore ball from a ruffled pole to a round one.

    part 5 · knits
  6. A ball knitted in rounds, count by count. The stitch count of each round of a ball knitted outward from one pole in 40 rounds, from the pole to the equator, in the fully relaxed state, against the count a sphere asks for. Increasing 5 at a time it reaches 65 at the equator, increasing on rounds 1, 2, 3, 5, 6, 7, 8, 9, 10, 12, 14, 16; Increasing 10 at a time it reaches 60 at the equator, increasing on rounds 3, 5, 8, 11, 15. What the chart cannot show is where round the ball the increases fall, which spirals or stacks them and is a choice of the pattern.

    A ball knitted in rounds washes the other way

    A ball can be knitted sideways in gores or outward from one pole in rounds, and both have to follow the same sine. But a gore counts its meridian in stitches and its circumference in rows, and a round counts them the other way, so the loop's aspect sits underneath one construction and on top of the other. A wash raises the aspect — and closes a gored ball's ruffled poles while it opens a round-knitted ball's.

    part 6 · knits
  7. A ball knitted in rounds with its increases stacked in 5 lines. The shape a ball of plain knit takes unstuffed when its increases, 5 at a time, are stacked in 5 lines from pole to pole, with the same stitches in every round as a sphere. Every stitch between two lines is flat knit, so the 5 panels are flat and the one shape they close up into without stretching has 5 flat sides in every round and 5-sided points at its poles: 2.42 sphere radii tall, 2.14 across its ridges and 1.73 across its flats, so 1.13 to 1.40 times as tall as it is wide. The knitted counts of a 40-round ball give 1.13 to 1.40, against 1.02 for the same counts with the increases spread round, whose rounding is its own. What the drawing cannot show is stuffing, which would stretch the panels towards round.

    Stacked increases knit a ball with flat sides

    A ball knitted in rounds can put its increases anywhere in each increase round. Stack them in lines from pole to pole and every stitch between two lines has a flat knit's neighbours, so the ball is made of flat panels and all its curvature sits on the lines. Flat panels with straight rows close up without stretching in exactly one way: every round a regular polygon, each pole a point. At five lines that ball is 13 per cent taller than it is wide across its ridges and 40 per cent across its flats, and to make it round the stuffing has to stretch the middle of every panel by π²/4m² — nine per cent at five lines, less than a wash moves a course at ten.

    part 7 · knits

All series