Textile Structure
how cloth is put together
Series

Satin — the series

7 essays on one idea, from the one that introduces it to the one that assumes the rest.
  1. Which satins exist. For each order, the moves that give a satin — a step coprime with the order, and not the steps of one and one less which give a twill instead. Four and six admit none, so no regular satin exists on four ends or on six.

    There is no satin on six ends

    Weavers have known it as a rule for centuries. It is a theorem with a one-line proof about common factors, and it rules out four ends as well.

    part 1 · weaves
  2. Which move to use on 16 ends. For each satin move the order admits, the distance from an interlacing to its nearest neighbour, measured on the torus the repeat lives on. A move whose interlacings crowd gives the eye something to find; the one that scatters furthest is the one to weave.

    Which satins are worth weaving

    Manuals give the moves a satin admits as a list, as though the survivors were interchangeable. They are not. Measure how far apart the interlacings sit and the traditional counter turns out to be the best move at the orders a weaver mostly uses — and to fail first at thirteen, where the square root names four and five scatters further.

    part 2 · weaves
  3. The 6-end satin. The 6-end satin on point paper, drawn over 2 repeats with its marks joined in reading order inside the first. The joining segments are not parallel and not equal, because there is no number of picks the mark advances by at every end. That is what irregular means, and it is not visible in the squares alone. At this order there is one distinct satin and none is regular. The longest float is 1 in the warp and 5 in the weft, and the cloth is one cloth. What the drawing cannot show is that this is the only one: that is a statement about 36 arrangements and is made by the enumeration.

    The six-end satin that does exist

    There is no six-end satin, and this collection proved it in its founding essays. The proof is about satins with a move number. Drop that word — keep one mark per end and no two marks touching — and six ends has exactly one satin, unique up to where the repeat is started, and four ends still has none at all.

    part 3 · weaves
  4. The lattice under 8/3 and 10/3. Satin marks drawn as points over two repeats, the 8-end satin on a move of 3, whose closest marks are √8 apart and next √10, so its marks line up 45° off the weft; and the 10-end satin on a move of 3, whose closest marks are √10 apart and next √10, two equal directions at right angles and so no single diagonal. For a regular satin the blue arrow is the shortest lattice vector and the red the next, and the faint lines run along the shortest through every mark — the diagonal the marks make. What the drawing cannot show is whether an eye finds that diagonal in woven cloth, where the marks are not points but short interruptions of a float, and where the yarn's own twist lies across them at an angle of its own.

    Most satins still have a diagonal

    A satin is chosen so that no diagonal forms, and its move is ranked by how far apart its interlacings sit. But the interlacings of a regular satin lie on a lattice, every lattice has a shortest step, and the marks line up along it. Only when two shortest steps tie is there no row to follow — and between five and forty ends the best move manages that at twelve of the thirty-five orders.

    part 4 · weaves
  5. Which satin orders are row-free, from 5 ends to 40. Every satin order from 5 to 40, marked where the best move's lattice has two shortest steps of equal length rather than one — which is the condition under which the interlacings do not line up into a row. The row-free orders are 5, 10, 13, 15, 17, 24, 25, 26, 29, 34, 35, 37: twelve of the 35 orders that admit a regular satin at all. An n-end satin floats over n − 1, so a float limit is a ceiling on the order, and the ceilings for limits of 8, 12, 16 are drawn. What the strip cannot show is the spread, by which the orders are ranked and which decides which move is best within each.

    A float limit leaves one row-free satin

    A satin is chosen so that no diagonal forms, and an earlier essay found that most of them fail: the interlacings lie on a lattice, every lattice has a shortest step, and the marks line up along it unless two steps tie — which happens at twelve of the thirty-five orders from five to forty. The other constraint was named and not applied. An n-end satin floats over n − 1, so a yarn that will not carry a float longer than eight admits four orders in all, and exactly one of them is row-free: the five-end satin, which is the one everybody already weaves.

    part 5 · weaves
  6. What an irregular satin buys, order by order. For each order, the best regular satin's and the best irregular satin's scatter at the order's own best spread — the largest share of the closest pairs that point in one direction, where one is a line and less is a scatter. 5 ends: regular 0.50, irregular none at the best spread; 6 ends: regular none exists, irregular 0.25; 7 ends: regular 1.00, irregular 0.33; 8 ends: regular 1.00, irregular none at the best spread; 9 ends: regular 1.00, irregular 0.25; 10 ends: regular 0.50, irregular none at the best spread; 11 ends: regular 1.00, irregular none at the best spread. Irregularity buys something at 6, 7, 9 and nothing at the rest, and where it buys it scatters over four directions with no more than a third in any one. What the bars cannot show is whether a reader sees the difference, which is a question about a visual system.

    An irregular satin scatters where a regular one lines up

    A regular satin's marks lie on a lattice, so its closest pairs all run along one vector and make a row. An irregular satin has no lattice at all, so its closest pairs may point several ways at once — and at seven and nine ends, where every regular satin at the best spread has a row, an irregular one reaches the same spread with its closest pairs scattered over four directions and no more than a third in any one. At eight and eleven ends there is no such satin: the best spread is reached by regular satins alone, and irregularity has nothing to offer.

    part 6 · weaves
  7. 8/3 at 1.00 and 8/3 at 1.29, drawn in cloth. Satin marks drawn over two repeats at the spacings of a cloth, with the pick direction stretched by the sett ratio — ends per centimetre over picks per centimetre — and every closest pair of marks joined. 8-end satin, move 3 at a sett ratio of 1.000: closest pairs point one way: a row; 8-end satin, move 3 at a sett ratio of 1.291: closest pairs point 2 ways: no row. What the drawing cannot show is the float each mark interrupts, which is what a reader of the cloth actually sees.

    A satin's row belongs to its sett

    Point paper draws an end and a pick as equal squares, and every result about which satins have a row was taken there. A cloth is not square: it is set at so many ends and so many picks a centimetre, and in cloth the ties that made twelve satin orders row-free are ties between steps of different shape, which break at the first per cent of unequal sett. The reverse happens too. An eight-end satin, rowed on paper, has no row at exactly 1.291 ends per pick; an eleven-end at 1.265 and 1.528. And the only scatter that survives a range of setts is an irregular satin whose closest steps are mirror images — which nine ends has from the first per cent and ten only by 1.3.

    part 7 · weaves

All series