Textile Structure
how cloth is put together
Series

Migration — the series

2 essays on one idea, from the one that introduces it to the one that assumes the rest.
  1. Where the strain goes, at a 25° twist. Extend a twisted yarn and the fibres in it are not all strained alike. If each stays at its own radius — the affine model — a fibre at helix angle θ takes cos²θ of the yarn's strain, so the fibre on the axis takes all of it and the fibre at the surface takes 82.1% of it. The core reaches its breaking extension first and the yarn cannot realise its own fibres. If instead every fibre migrates between the core and the surface, every fibre has the same mean strain and they all break together. The two are exactly computable — 0.8214 against 0.9509 of what the fibres could give — and the ratio between them, 2/(cos α(1 + cos α)) = 1.158, is what migration is worth. The shading is that arithmetic and the two panels use the same scale.

    A straight fibre cannot share the load

    Extend a twisted yarn and its fibres are not all strained alike: the one on the axis takes the whole of it and the one at the surface takes cos²α. So they do not break together, and what a wandering fibre is worth comes out as one expression with nothing fitted in it.

    part 1 · mechanics
  2. The pressure a 23° twist puts on its own fibres. A twisted yarn squeezes itself. Every fibre under tension at a radius pulls inward with sin²θ of its tension per unit length, and integrating outward to the surface — where the pressure is zero by definition, because there is nothing outside to push against — gives p(r) = ½σ(cos²θ(r) − cos²α) in closed form. At a surface angle of 23° the pressure on the axis is 7.6 per cent of the core fibre's own axial stress and the mean over the section is 3.61 per cent of it. The shading is that closed form and the curve is the same function plotted; the shape is what matters, and its one uncompromising feature is the zero at the edge. The outermost fibres are held by nothing, which is why a yarn is hairy, why a surface fibre is the one that comes away on a finger, and why singeing changes a yarn's behaviour out of all proportion to the mass it removes.

    What grips the end of a fibre

    A twisted yarn squeezes itself, and the squeeze holds the fibre ends in. Write the slip and the break out side by side and the fibre's own strength cancels — and so does the load on the yarn — leaving a gripped length that depends on fineness, friction and the twist and on nothing else.

    part 2 · mechanics

All series