Fancy yarn — the series · Textile Structure

A V-fastened tuft. A cut pile bound into its ground by V fastening, drawn in section. The pile end passes beneath 3 of the 6 ground picks and wraps 1 half-turn around them in all. The integrity criterion says the tuft is attached; how hard it is held is a different question with a different model behind it.

A chenille is a yarn that is already a fabric

A chenille yarn is a woven gauze cut into strips. Every structural question this collection asks about cloth can be asked about it — does it hang together, how many systems has it, what holds the pile in — and the answers are the same answers one level down.

part 1 · fancy

A designed thin place does not get worse and an accidental one does. The thinnest place a yarn reaches, against how many gauge lengths of it are tested, for a slub yarn and for a randomly uneven yarn of the same 36.3% coefficient of variation. The slub's floor is its base count — 89% of its mean — and it is a horizontal line, because a designed variation has a stated minimum and never goes below it. The random yarn's minimum is an order statistic and falls without limit: 56% over 10 lengths and 22% over 30000. So the advantage is not a number but a function of how much yarn is being asked about, running from 1.6× to 4.0×. What the curve cannot show is the break itself: a yarn's strength at a thin place is not proportional to its linear density there, and the conversion needs a fibre model.

A designed thin place is kinder than an accidental one

A slub yarn and a badly spun one can carry exactly the same coefficient of variation, and the number tells a mill nothing about which it has. The designed variation has a floor — its base count, and it never goes below it — while the accidental one has a tail that falls further the more yarn is tested. At 36% CV the slub bottoms at 89% of its mean and the random yarn reaches 24%, and the gap widens from 1.6 to 3.7 times as the test grows from ten gauge lengths to ten thousand.

part 2 · fancy

A bouclé at an overfeed of 0.80. A core of 20 tex running straight, an effect thread of 30 tex delivered 80 per cent faster than it, and a binder of 15 tex over the top. The surplus effect thread has nowhere to go but into loops, and their size is not a free choice: a semicircular loop of radius r consumes r(π − 2) of surplus, so at one loop every 3 mm the radius is 2.10 mm — 0.70 of the spacing. The yarn's resultant count is 89 tex and the sum of its three components is 65, because the effect enters multiplied by its own overfeed. What the drawing cannot show is the load path: the core and the binder are at the yarn's own length and the effect thread is longer than the yarn, so a pull on the yarn is carried by 39 per cent of its mass and the loops stay slack.

A fancy yarn has its crimp in the wrong thread

A bouclé is made by feeding an effect thread eighty per cent faster than the core it wraps, so the yarn contains more thread than it is long — which is crimp by this collection's own definition. A cloth's crimp is in the thread that carries the load, so removing it is the cloth's first extension. A bouclé's surplus is in a thread that carries nothing, so pulling the yarn stretches the core at once and the loops never straighten. Thirty-nine per cent of the yarn's mass is on the load path, and the other sixty-one is decoration.

part 3 · fancy

A bouclé cloth jammed at its loops and at its count, overfeed 0.8. Sections across 36 mm of plain-woven cloth in a bouclé of 89 tex — a 20 tex core, a 30 tex effect overfed 80% with loops every 3 mm, and a 15 tex binder — drawn to scale. The loops stand 2.10 mm off the core, so the yarn's outline is 4.43 mm across while the diameter its count implies is 0.352 mm, 12.6 times smaller. Jammed at the outline the cloth takes 1.13 ends a centimetre and weighs 20 g/m²; jammed at the count, 14.2 and 252 g/m². What the drawing cannot show is where between the two a real cloth jams, which is how far its loops interleave with their neighbours'.

A bouclé is set by its loops and weighed by its count

A bouclé yarn has two diameters: the one its count implies, a third of a millimetre, and the one its loops occupy, over four millimetres. A cloth jams where its yarns touch, and a bouclé's yarns can touch at either — so its jamming sett is a bracket twelve and a half times wide, from 1.1 to 14 ends a centimetre. The weight follows the count wherever in that bracket the cloth is set, which puts the open end at a twelfth of the close end's weight with four per cent of its area covered by yarn.

part 4 · fancy

Bouclé loops on 3 mm binder spacing at overfeeds of 30%, 80%, 150%, 300%, 500%. Loops of an overfed effect thread drawn to one scale, each between two binder points on a straight core, as the curve of least bending energy with its ends along the core. Overfeed 30%: 1.30 times its base in thread, 1.10 mm tall, a bell, against a semicircle of 0.79 mm; Overfeed 80%: 1.80 times its base in thread, 1.95 mm tall, a bell, against a semicircle of 2.10 mm; Overfeed 150%: 2.50 times its base in thread, 2.92 mm tall, overhanging, against a semicircle of 3.94 mm; Overfeed 300%: 4.00 times its base in thread, 4.83 mm tall, overhanging, against a semicircle of 7.88 mm; Overfeed 500%: 6.00 times its base in thread, 7.25 mm tall, overhanging, against a semicircle of 13.14 mm. The dashed arcs are the semicircles, drawn where they fit. What the drawing cannot show is the binder's own path and thickness, which the loop's feet are taken to sit exactly on.

A bouclé loop is an elastica, not a semicircle

A bouclé's loop was taken to be a semicircle, and the semicircle cannot be right: it meets the core at a right angle, and at eighty per cent overfeed it is wider than the gap it stands in. Solved as what it is — a length of thread leaving the core along the core at two binder points — the loop is taller than the semicircle below an overfeed of two thirds and shorter above it, overhangs at 119 per cent and closes its neck at 559. Nothing of the fibre is in its shape, and the bouclé's jamming bracket at eighty per cent is 11.7 wide rather than 12.6.

part 5 · fancy

A bouclé loop at 80 per cent overfeed, pressed to four heights. One loop of a bouclé at 80 per cent overfeed on 3 millimetre binder spacing, drawn to scale at 100, 80, 50, 20 per cent of its free height, with the force it pushes back with beneath each. The pressed loop is the same elastica the free one is, with one condition added: at its apex the tangent is along the core again, so a pressed loop is two half-loops each with its rise prescribed. At 100 per cent it stands 1.95 millimetres and pushes with -0.00 millinewtons; At 80 per cent it stands 1.56 millimetres and pushes with 12.19 millinewtons; At 50 per cent it stands 0.97 millimetres and pushes with 10.02 millinewtons; At 20 per cent it stands 0.39 millimetres and pushes with 4.90 millinewtons. What the drawing cannot show is the stiffness bracket: the force is the lower bound, with the fibres free to slide.

A loop has a maximum force in it

A bouclé loop pressed by its neighbour is the same elastica the free one is, with one condition added — at its apex the tangent lies along the core again, so a pressed loop is two half-loops with their rise prescribed and needs no contact solve at all. Solved, the eighty-per-cent loop pushes back with nothing at its free height, twelve millinewtons at four fifths of it, and two and a half at a tenth. A curve with a maximum in it is a softening spring, and the promise this account made — a cloth's position read from its beat-up — cannot be kept, because the whole bracket sits at one pressure.

part 6 · fancy

A 100-gram bouclé in section, with the depth to its own load path. A bouclé cloth of 100 grams a square metre in section: the core and binder along the bottom, carrying everything, with the effect thread's loops standing 0.31 millimetres above them. The cloth's surface is the loops and nothing else — its loop envelope is 12.6 times its count diameter — so a rubbing surface meets effect thread first and reaches the core only after that depth. 60.7 per cent of the yarn's mass is effect thread on no load path and 39.3 per cent is core and binder. What the section cannot show is the third dimension: the loops of neighbouring yarns lie between these and are pressed by them.

A bouclé wears from the loops down

A cloth loses its strength before its mass, because a woven cloth's crowns are the very threads that carry the tension. A bouclé inverts it exactly. Its surface is its loops, its loops hang off a core that carries everything, and 61 per cent of its yarn is on no load path at all — so a rub takes three tenths of a millimetre of thread that does nothing before it reaches anything that does, and the cloth is ruined to look at while it is still as strong as it was woven.

part 7 · fancy