Textile Structure
how cloth is put together
Generator

Two pore systems in one cloth — 24 threads per centimetre

Two pore systems in one cloth — 24 threads per centimetre
Two pore systems in one cloth — 24 threads per centimetre. A plain weave of 20 tex cotton in section, at 24 threads per centimetre, so the yarn is 167 µm across and the clear hole between two picks is 250 µm. That hole's hydraulic radius is 124.8 µm. Inside the yarn, fibres 14 µm across packed at 0.6 leave spaces of hydraulic radius 2.33 µm — 53 times finer, and by Jurin's law 53 times higher: 6.37 m against 119 mm. The yarn's interior is magnified 6 times and the two discs at the foot are the only part drawn at one scale.

A plain weave of 20 tex cotton in section, at 24 threads per centimetre, so the yarn is 167 µm across and the clear hole between two picks is 250 µm. That hole's hydraulic radius is 124.8 µm. Inside the yarn, fibres 14 µm across packed at 0.6 leave spaces of hydraulic radius 2.33 µm — 53 times finer, and by Jurin's law 53 times higher: 6.37 m against 119 mm. The yarn's interior is magnified 6 times and the two discs at the foot are the only part drawn at one scale.

4 essays call wick-section. The drawing above is what it returns with no arguments at all; every call below passes it something, because a placement that passes nothing draws whichever member of the family the generator happens to default to rather than the weave its essay argues about.

Where it is called

Every figure listed here is drawn from this one rule.

The sett moves the flux and not the height. A 20 tex cotton yarn woven at every sett from 8 to 34 threads per centimetre. Above: the hole between the threads lifts from 27 to 234 mm as the cloth closes, while the space between the fibres lifts 6.37 m at every one of them — so the cloth's maximum is the flat line, and the sett does not touch it. Below: the permeability of those holes falls by a factor of 292 over the same range. Both curves are monotone, so there is no optimum — only an interval, ending at the jam at 34.6 threads per centimetre. Setting and geometry

The sett decides how much, not how high

Every essay on wicking so far has found the sett deciding something. This one finds it deciding nothing at all: a cloth's maximum rise is 6.37 m at eight threads per centimetre and 6.37 m at thirty-four, because the sett cannot reach inside a yarn.

 Two pore systems in one cloth — 24 threads per centimetre. A plain weave of 20 tex cotton in section, at 24 threads per centimetre, so the yarn is 167 µm across and the clear hole between two picks is 250 µm. That hole's hydraulic radius is 124.8 µm. Inside the yarn, fibres 14 µm across packed at 0.6 leave spaces of hydraulic radius 2.33 µm — 53 times finer, and by Jurin's law 53 times higher: 6.37 m against 119 mm. The yarn's interior is magnified 6 times and the two discs at the foot are the only part drawn at one scale. Cloth doing a job

How high a cloth wicks

A woven cloth has two capillary systems and they are a factor of twenty to a hundred apart. The one every diagram draws — the hole between four threads — lifts 119 mm. The one nobody draws, inside the yarn, lifts 6.37 m.

 A front on a thread with 8 per cent crimp. Three rows at one scale. The top row is the warp end laid out straight, with the wetted front marked at four equal quarters of its own length — which is where Washburn's law puts it at four times whose square roots are evenly spaced. The middle row is the same thread crimped at 8 per cent, so it covers 92.6 per cent of the paper the straight one did. The bottom row is the cloth, and the four fronts on it are the four above pulled back by 1.08. A coefficient is a length squared over a time, so it comes down by 1.1664 — exactly (1 + c)², with no property of the liquid or the fibre in it. The thread's thickness is not drawn and neither is the liquid: a meniscus in a 2.33 µm pore is finer than any line on this canvas. Cloth doing a job

Wicking is slower along a crimped thread

A front travelling up a warp end travels the thread's path, which is longer than the cloth by exactly the crimp. So the wicking coefficient measured on the fabric is the yarn's own divided by (1 + c)² — 14.3 per cent lost at eight per cent crimp, whatever the liquid.

 How high each pore system stands while the cloth is drying. The height at which supply up the cloth balances loss from its faces, for the two pore systems, against the evaporation rate. The coarse system between the yarns barely moves — 137 millimetres at the dry end against 109 at the wet — while the fine system between the fibres falls from its sealed-tube height of 6375 millimetres to 52. The two cross at 1553 grams a square metre an hour. Cloth doing a job

A drying cloth cannot lift what a sealed tube can

Every rise on this account is an equilibrium in a sealed tube, and a garment is neither sealed nor at equilibrium. Balancing the supply up a strip against the loss from its faces gives a quadratic whose width cancels exactly: in an ordinary room the fine system between the fibres stands at 500 millimetres instead of 6.37 metres, keeping 7.9 per cent of what a tube would give it, while the coarse system loses a third of a per cent. The forty-sixfold advantage becomes 3.7, and in a drying wind it reverses.

The whole library · All essays