Textile Structure
how cloth is put together
Generator

The surface of a 2/2 twill, in plan

The surface of a 2/2 twill, in plan
The surface of a 2/2 twill, in plan. One repeat of a 2/2 twill in sheeting, drawn 2 × 2 times, with every point painted in the colour of whichever thread owns the outside of the cloth there and at an opacity set by how high it is. The range is 221.0 µm from the highest point to the lowest, the root-mean-square roughness is 74.9 µm, and 30% of the plan is hole rather than surface. The bright ribbons are the float plateaux, where a thread lies straight across the threads it passes over and its outside is a horizontal line rather than a point — which is the whole of what follows. The warp crowns at 190.8 µm and the weft at 182.8 µm, a step of 8.0 µm, so the cloth touches the world on its warp alone until anything pressing on it has sunk that far.

One repeat of a 2/2 twill in sheeting, drawn 2 × 2 times, with every point painted in the colour of whichever thread owns the outside of the cloth there and at an opacity set by how high it is. The range is 221.0 µm from the highest point to the lowest, the root-mean-square roughness is 74.9 µm, and 30% of the plan is hole rather than surface. The bright ribbons are the float plateaux, where a thread lies straight across the threads it passes over and its outside is a horizontal line rather than a point — which is the whole of what follows. The warp crowns at 190.8 µm and the weft at 182.8 µm, a step of 8.0 µm, so the cloth touches the world on its warp alone until anything pressing on it has sunk that far.

6 essays call surface-map. The drawing above is what it returns with no arguments at all; every call below passes it something, because a placement that passes nothing draws whichever member of the family the generator happens to default to rather than the weave its essay argues about.

Where it is called

Changing this generator changes every one of these figures.

The surface of a 2/2 twill, in plan. One repeat of a 2/2 twill in sheeting, drawn 2 × 2 times, with every point painted in the colour of whichever thread owns the outside of the cloth there and at an opacity set by how high it is. The range is 221.0 µm from the highest point to the lowest, the root-mean-square roughness is 74.9 µm, and 30% of the plan is hole rather than surface. The bright ribbons are the float plateaux, where a thread lies straight across the threads it passes over and its outside is a horizontal line rather than a point — which is the whole of what follows. The warp crowns at 190.8 µm and the weft at 182.8 µm, a step of 8.0 µm, so the cloth touches the world on its warp alone until anything pressing on it has sunk that far. What cloth is

A cloth has an outside

Every quantity in this collection is a property of the inside of a fabric — a crimp, a cover, a hole, a fibre count. None of them says where the cloth stops. The outside is a height field the draft computes, its crowns stand at two different levels, and which of the two is higher decides what the cloth touches the world with.

 The bearing curves of 4 weaves in one cloth. How much of the plan is within a given depth of the highest point, for plain, 2/2 twill, satin 5, satin 8 — all in sheeting, all at the same sett, the same counts and the same thickness. They differ only in their drafts. At a hundredth of the cloth's thickness the last of them is touching 9 times the area of the first, and the gap widens as the depth shrinks, because the curves do not merely differ by a factor — they have different exponents. A crown that is a line opens as the square root of the depth and a crown that is a point opens in proportion to it. What cloth is

The curve that says what a cloth touches with

Take a cloth's surface and ask what fraction of the plan lies within a given depth of its highest point. The answer is one curve, it answers every question of the form what does this touch, and its behaviour at the top is decided by a single bit of the draft — whether the longest float is one crossing or more than one.

 The crown line of every four-by-four draft there is. All 22,874 four-by-four drafts in which every end and every pick interlaces at least once, at sheeting's construction, counted by how much horizontal crown line each carries per square millimetre. The bar at zero holds 2 of them — the two plain weaves, and nothing else in the catalogue. Every other draft has a float somewhere, and a float is a plateau, and a plateau is a line of constant height. So the whole catalogue divides into two drafts that touch at points and 22,872 that touch along lines, with no intermediate case, because a float is either present or it is not. What cloth is

Two drafts of twenty-two thousand

Every four-by-four draft there is, measured by how much horizontal crown line its surface carries. Two of them carry none — the plain weave and its translation, and nothing else in the catalogue — and the quantity turns out to be smallest for the most balanced cloths and largest for the most one-sided, which is the opposite of what a float count suggests.

 What it costs to touch a cloth. The pressure needed to bring a stated fraction of the plan into contact, for plain, 2/2 twill, satin 8 in sheeting. Reaching two per cent of the plan takes 2.83 kPa on a plain and 0.05 on a satin 8, a factor of 55. The stiffness in this figure is fitted and is labelled as such. A yarn's resistance to being squashed out of round has no lower bound at all — a bundle of fibres free to slide is a fluid in cross-section — so no bracket exists to compute this from, and what is used is the value this collection fitted to measured fabric thickness. Every curve moves together across its published range, which is why the ratio between weaves survives and the absolute values are quoted with the fit named. What cloth is

How much of a cloth is touching

Press a fabric against a flat plate with the weight of a hand and ask what fraction of it is actually in contact. The bearing curve answers, and the answer is about four per cent — of which the great majority is not the cloth's surface at all, but the hairs standing off it, which nothing in this arithmetic can see.

 A cloth loses its strength long before it loses its mass. Rubbing a 2/2 twill in sheeting down, plotted against how much of its own solid volume has gone. The lower curve is the fraction of the plan the rubbing is touching; the upper is the fraction of the warp's section that has been cut away. They are wildly different because the wear is spread and the damage is concentrated: material comes off the whole surface, but it comes off every thread at the same place, and a thread breaks at its thinnest place. At one per cent of the mass gone the section is already 5% smaller. That is why a fabric that looks barely worn fails a strength test, and why abrasion resistance measured as mass loss and abrasion resistance measured as residual strength are two different quantities that are quoted as one. Cloth doing a job

A cloth loses its strength before its mass

Rub a fabric and it sheds material from all over its surface, but it sheds it from every thread at the same place — and a thread breaks at its thinnest place. So the strength gone is always several times the mass gone, the ratio is computable from the bearing curve, and it is worst for the weave whose crowns are points.

 The sett sets the pitch of the relief and not its height. A 2/2 twill in sheeting set from 14 to 29 ends per centimetre. The spacing of the crowns falls from 714 µm to 345 µm — in exact proportion to the sett, because it is the sett — while the height the surface swings through moves from 381 µm to 381 µm, which is not at all. The reason is the closure condition: the two crimp heights must add to the sum of the two diameters whatever the spacing, so the amplitude of the surface is pinned by the yarn and only its wavelength is free. The third curve is the root-mean-square roughness measured off the sampled surface, which wanders by a few per cent because it depends on where the sample grid falls relative to the crowns — it is drawn to show that it has no trend, not to be read off. A closer sett therefore makes a finer-grained cloth and not a smoother one, and the two are confused in every description of fabric handle. At 32 ends per centimetre the geometry refuses altogether: the cloth is close enough that its crimp can no longer divide equally, which is the jam arriving as a loss of symmetry rather than as a loss of room. Setting and geometry

The sett owns the pitch and the yarn owns the height

Set a cloth twice as close and its surface does not get smoother. The crowns come twice as often, because that is what a sett is, and they stand at very nearly the same height, because the closure condition pins the amplitude to the yarn — so a fine cloth is finer-grained rather than flatter, and the two are confused in every description of handle.

The whole library · All essays