Textile Structure
how cloth is put together
Generator

A stripe of a satin stripe on a plain ground

A stripe of a satin stripe on a plain ground
A stripe of a satin stripe on a plain ground. a satin stripe on a plain ground, written as one draft of 8 picks and 20 ends. Each band is generated from its own rule and the whole matrix is measured as one: 10 shafts, which is the number of distinct columns in the union of the two bands, against 8 if every column were shared and 10 if none were. The bands have 0 columns in common.

a satin stripe on a plain ground, written as one draft of 8 picks and 20 ends. Each band is generated from its own rule and the whole matrix is measured as one: 10 shafts, which is the number of distinct columns in the union of the two bands, against 8 if every column were shared and 10 if none were. The bands have 0 columns in common.

11 essays call stripe. The drawing above is what it returns with no arguments at all; every call below passes it something, because a placement that passes nothing draws whichever member of the family the generator happens to default to rather than the weave its essay argues about.

Where it is called

Changing this generator changes every one of these figures.

A stripe of a satin stripe on a plain ground. a satin stripe on a plain ground, written as one draft of 8 picks and 20 ends. Each band is generated from its own rule and the whole matrix is measured as one: 10 shafts, which is the number of distinct columns in the union of the two bands, against 8 if every column were shared and 10 if none were. The bands have 0 columns in common. Pattern and colour

A stripe is a partition of the warp

A striped cloth is not a weave with decoration on it — it is one matrix in which different bands of ends obey different rules. The shaft count is a set union rather than a sum, and of forty-five pairs of standard weaves only three share a single column.

 Plain weave, doubled. Plain weave, then the same weave with its picks grouped in 2, its ends grouped in 2, and both — which are a warp rib, a weft rib and a hopsack — and a 2/2 twill beside them for comparison. The rules under the drafts bracket the threads that lift together on every pick and so lie touching. Each doubling multiplies the cloth's own unit by 2: 2, then 4, then 8 intersections. The hopsack and the twill interlace equally often and are drawn from different rules. The setts under each draft are the densest that weave may be set at with a 0.25 mm yarn, and a rib's two are 0.750 apart where every other weave here is square. Weaves

A cord is a stripe with no colour in it

Warp rib, weft rib and hopsack are plain weave with its threads doubled, in the warp, the weft, or both. Six of the nine measures this site takes off a matrix cannot tell a 2/2 hopsack from a 2/2 twill, and the three that can are not the ones a weaver quotes.

 Two weft colour orders thrown on a loom with boxes at one side. Weft colour orders thrown pick by pick on a shuttle loom that picks alternately from the two sides. For an order with runs of four, two, two and four, every throw finds a shuttle of its colour on the side it leaves from, so the order can be woven. For an order with runs of three and three, pick 4 has to be thrown from the right in a colour whose shuttle is on the other side, and the order cannot be woven. On a loom with boxes at one side the box opposite holds only the shuttle just thrown, which the next pick must throw straight back, so colour can change only between pairs of picks. What the drawing cannot show is the mechanism that drops the boxes, which decides how fast a change can be made but not which changes are possible. Pattern and colour

A weft stripe is counted in pairs of picks

A warp's colour order is laid out once at warping and the loom never has to think about it. A weft's is thrown, one pick at a time, by shuttles that cross the cloth and stay where they land. On a loom with boxes at one side that makes every coloured band an even number of picks; with boxes at both sides it admits odd bands and pays for them in shuttles; and a tartan, which uses one order in both directions, is designed for its weft whether its designer knew it or not.

 A warp pinstripe in a 2/2 twill, 1, 2, 3 threads wide. A light stripe of ends in a dark 2/2 twill, drawn as the face a reader sees at 1, 2, 3 threads wide over 3 repeats. A single stripe thread is on the face at 50% of the crossings and goes under for up to 2 at a time, so it draws a broken line. Adjacent threads of the same colour cover one another's gaps, and the line becomes unbroken at 3 — the fewest neighbours for which, at every crossing, at least one is on the face — though an unbroken line is not a solid one, and beneath each panel is how much of its width is light, which varies along it until the line is a whole repeat wide. What the drawing cannot show is distance: a broken line whose gaps are a fraction of a millimetre reads as a fainter unbroken one from arm's length, and how far that is depends on the sett and on the eye. Pattern and colour

No weave draws an unbroken line one thread wide

A pinstripe is drawn on point paper as a single coloured column, and in cloth a single end is on the face only where it is up — so in every weave that interlaces, a line one thread wide has gaps in it. Neighbours of the same colour fill each other's gaps, and the fewest that leave no gap is a property of the weave: two in a plain weave, three in a 2/2 twill, and in a warp-faced sateen two across the warp and eight across the weft. Unbroken is not solid either — an eight-pick bar in that sateen has no gap and is an eighth light.

 What a group of 2 threads behaves as. A group of 2 threads of 250 µm with nothing separating them, beside the single thread of the same width and the single thread of the same yarn, all drawn to one scale. The bars are the group's four readings as ratios. Cover is a width and adds, so the group covers exactly what a 500 µm thread would — with 50 per cent of its yarn. Bending rigidity is a second moment and does not add: 2 threads free to slide give 12.5 per cent of the thick thread's and the same 2 fused into one body give 62.5, so a real group is somewhere between and where depends on friction. Against the thread of the same yarn the two readings point opposite ways: the group covers 1.41 times as much and bends 0.50 times as stiffly if free. What the drawing cannot show is the friction that decides where between the two limits a finished cloth sits. Weaves

A group is one thread for cover and two for bending

The rung below leaves a limitation standing: two ends with nothing between them lie touching, and whether they behave as one thread of twice the diameter was said to depend on twist, hairiness and finish. Three of the four measures have exact answers with no friction in them and no two agree. A pair covers exactly what a double-diameter thread covers, with half its yarn, and bends at between an eighth and five eighths of its rigidity — and at equal yarn it covers forty per cent more and bends half as stiffly.

 A warp rib's cord, at doublings of 2 and 4. One warp end drawn in section along the cloth, over the pick groups of a warp rib, at doublings of 2 and 4 and at one scale. The cord's crests are the pick groups and its two dimensions come from different places. The height is the weft's own crimp amplitude and Peirce's closure condition caps it at the two yarn diameters together — 500 µm here — so it runs 304 µm at a doubling of 2 and 361 at 4, which is 61 and 72 per cent of the ceiling. The pitch is the doubling times the pick spacing and has no ceiling at all. So a larger doubling gives a taller cord and a wider one, and wider faster: the aspect falls from 0.40 to 0.29. What the section cannot show is what a finish does, which flattens the cord without changing either the pitch or the ceiling. Weaves

A cord's height has a ceiling and its width has none

A warp rib's cord is a wave, and its two dimensions come from two different places. The height is the weft's own crimp amplitude, and Peirce's closure condition caps it at the two yarn diameters together — 500 µm for a quarter-millimetre yarn, of which a 2/2 rib reaches 304 and a 6/6 rib 391. The pitch is the doubling times the pick spacing and has no cap at all. So a bolder rib is taller and wider, and wider faster: the aspect falls from 0.41 to 0.22.

 Grouping the two systems by different amounts. Plain weave with its ends grouped by one number and its picks by another, over a grid of both. The four weaves the trade names are the corners of this space — plain at one and one, a warp rib down the first column, a weft rib along the first row, a hopsack on the diagonal — and the interior is the oblong matt, which has a name and no literature. Every cell weaves on two shafts, so the harness cannot tell any of them apart; the fundamental domain is exactly 2ab, so the notation's cost is the product; and the longest float is the larger of the two groupings. The two densest setts move with the two groupings separately, so the sett ratio is one exactly on the diagonal and nowhere else — a 3×1 matt sets at 1.50 and its transpose at the reciprocal. What the grid cannot show is the cord: the diagonal has no directional relief at all and everything off it does, in the direction of the larger grouping. Weaves

The four named weaves are corners of a family

Plain, warp rib, weft rib and hopsack are one construction with two knobs, and the trade turns both together or neither. Group the ends by two and the picks by three and the result is an ordinary cloth with a name, no literature and a fundamental domain of twelve intersections on two shafts — and the family's three quantities all have closed forms: two shafts everywhere, a unit of exactly 2ab, and a longest float of the larger grouping.

 How hard each grouping holds its own threads. The grip a cloth has on one of its own threads inside a 10 mm seam allowance, for six members of the doubled family at 24 threads per centimetre and a friction coefficient of 0.3. Grip accumulates multiplicatively at every crossing — the capstan equation on Peirce's own weave angle — so it is exponential in the crossings, and the crossings are the interlacing rate times the intersections in the allowance. The family's interlacing rate has a closed form, (a + b)/2ab, which is half the sum of the two reciprocals — so the two groupings enter symmetrically and each one saturates. The dashed line is the thread's own strength: a cloth whose grip falls short of it lets the thread slide out rather than break, which is seam slippage. A 2/2 hopsack is below it at this allowance and a 1/4 warp rib is above, on cloths whose firmness differs by an eighth. What the bars cannot show is the friction coefficient, which is measured and is not a constant of cloth; the ordering holds at every value anybody reports and the sizes do not. Weaves

What nothing separates comes out together

The doubled family's interlacing rate has a closed form — half the sum of the two groupings' reciprocals — so a seam's grip on its own threads is the exponential of a harmonic mean, and it saturates in each grouping separately. At a ten-millimetre allowance a 2/2 hopsack holds a thread at seventy-four times the applied tension and a 1/4 warp rib at two hundred and eighteen, on cloths whose firmness differs by an eighth.

 The edge of a warp line in a 2/2 twill, at 3 and 4 threads. A light line in a dark 2/2 twill, drawn at 3 and 4 threads wide over 3 repeats with both of its boundaries traced crossing by crossing. The line has no gap at either width, and neither boundary is straight: at the crossings where the outermost thread of the band is under the ground, the edge retreats to the next thread in. At 3 it swings 2 threads with a period of 4; At 4 it swings 2 threads with a period of 4. What the drawing cannot show is distance, at which a swing of one thread width is below what an eye separates and a swing of three may not be. Pattern and colour

An unbroken line is not a clean one

A line of colour has two boundaries and neither is straight, in any weave there is. The thread at the edge must go under somewhere, and where it does the edge retreats to its neighbour — so the boundary steps, and by exactly one thread less than the narrowest unbroken line the weave draws. Over 22,874 drafts there are three widths and three swings and no draft anywhere else, and widening the line past its narrowest unbroken width leaves the edge precisely where it was.

 The named colour-and-weave effects, sorted by the loom their weft needs. Each named colour-and-weave effect with the shortest band in its colour order and the cheapest loom that can throw that order in the weft, on a loom with 4 boxes a side. end-and-end, runs of 1 and 1, needs picking at will; hairline, runs of 1 and 1, needs picking at will; log cabin, runs of 1 and 1, needs picking at will; tattersall, runs of 1 and 9, needs picking at will; birdseye, runs of 2 and 2, needs boxes at one side; crow's foot, runs of 2 and 2, needs boxes at one side; step pattern, runs of 2 and 1, needs boxes at both sides; three-and-one, runs of 3 and 1, needs picking at will; houndstooth, runs of 4 and 4, needs boxes at one side; shepherd's check, runs of 6 and 6, needs boxes at one side; gun club, runs of 4 and 4 and 4 and 4, needs boxes at one side; glen check, runs of 4 and 4 and 4 and 4 and 2 and 2 and 2 and 2, needs boxes at one side. The warp costs nothing, because a colour order in the warp is laid out once at warping; the weft is thrown one pick at a time by shuttles that stay where they land, so an effect's price is its weft order alone. What the bars cannot show is the pattern, which is in neither the order nor the weave but in what they make of each other. Pattern and colour

The finest colour-and-weave effects need the rarest loom

A houndstooth, a shepherd's check and a gun club check are thrown by the cheapest shuttle loom there is. A hairline, an end-and-end and a log cabin are thrown by none — a colour on every other pick is thrown from the same side every time, so its shuttles pile up at the far end of the loom and never come back. The dividing line is the parity of the bands and nothing else, which is why it survives the fact that no two sources agree about how wide a shepherd's check is.

 A 2/2 twill with warp 1/1 and weft 2/2, as drawn and woven across. A 2/2 twill coloured 1/1 in the warp and 2/2 in the weft, drawn as the face of the cloth, and the same cloth turned through a right angle, which is what the loom makes if the two colour orders are exchanged and the weave turned with them. As drawn the weft order is 2/2 and needs boxes at one side; woven across the weft order is 1/1 and needs a loom picking at will. What the drawings cannot show is whether the cloth's two systems can be exchanged, which depends on their yarns and setts. Pattern and colour

A colour-and-weave look costs its cheaper order

The finest colour-and-weave effects need the rarest loom because a weft order is thrown pick by pick and a warp order is laid out once, so an effect's price was said to be its weft. That is true of a construction and false of a cloth. The same cloth can be woven lying across the loom, with its warp order thrown as weft and its weft order laid in the warp, and then it costs the other order. Over every two-colour look twelve small weaves make with orders up to six threads — 4,036 of them — 55 per cent need a loom picking at will as drawn and 31 per cent need one either way round. The looks turning rescues are the ones fine in one direction only, and not one of the trade's named effects is among them.

The whole library · All essays