Generator

A double cloth

Two complete fabrics woven in one repeat, and what happens when a single intersection is turned over. The layer count beside the draft is computed from the matrix drawn, and the census below it is every single-square change tried in turn.

3 essays call stitching. The drawing above is what it returns with no arguments at all; every call below passes it something, because a placement that passes nothing draws whichever member of the family the generator happens to default to rather than the weave its essay argues about.

Where it is called

Changing this generator changes every one of these figures.

Weaves

Backed and stitched constructions

A double cloth is two fabrics woven at once, and the check that verifies it says exactly two. Turn one intersection over and it says one — which means one mistake is enough to destroy the construction, and the enumeration says half of them would do it.

A tube. A two-layer fabric 6 ends wide in each layer, with the weft's path drawn across the section below the draft. 1 piece of cloth, 0 free selvedges, 1 shuttle, and a developed width of 12 ends however the edges are joined. The connectivity of the infinite repeat is 2 for this draft and cannot tell this construction from the others.

Compound and figured cloths

A tube and two cloths are the same draft

Two separate fabrics, a cloth twice the width of the loom and a seamless tube are the same draft to the last square. The check this site is built on reports two layers for all three and is right every time — because the thing that separates them is four free selvedges, or two, or none, and a repeat has no selvedges in it.

A two-layer interchange, 1 block by 2. A two-layer cloth whose layers change places from block to block, drawn as the draft and as the section a weaver would draw. Each block is one repeat of the stack, 4 picks by 4 ends, and the design has 2 boundaries in it. Every strand in the draft is coloured by the cloth this site's criterion puts it in, and there is one colour, because there is one cloth — with no intersection reversed anywhere in the repeat. A stitch joins two layers at a point; an interchange joins them along a line, and the line is the design's own block boundary rather than anything added to it. The section below is schematic: it draws each ply as a line rather than as its threads, because what has to be seen is that the two lines cross, and a section at thread level over 2 blocks is a picture nobody can count.

Compound and figured cloths

An interchange joins what a stitch would have had to

The rung below spent a whole essay on where a stitch may be put in a double cloth, and found face weaves with nowhere to put one at all. A design in which the two layers change places from block to block needs no stitch anywhere: the boundary is the join. Two blocks side by side make one cloth with not a single intersection reversed, and the same two blocks with no boundary between them make two.

The whole library · All essays