Generator

A trellis sheared 30°

The net at an angle, with every thread segment exactly the length it started at. The extension along the diagonal is the bias stretch, and it is a change of shape rather than a change of length.

4 essays call shear. The drawing above is what it returns with no arguments at all; every call below passes it something, because a placement that passes nothing draws whichever member of the family the generator happens to default to rather than the weave its essay argues about.

Where it is called

Changing this generator changes every one of these figures.

Mechanics and drape

The bias is a mechanism

Cloth cut at forty-five degrees stretches by a third and springs back, while the threads in it stretch by nothing at all. Almost every explanation given for this is wrong, and the right one is not about elasticity.

How far the bias goes, and where it stops. Extension along the bias against shear angle, with the angle at which the threads jam marked for three settings. The curve is geometry and so is the wall — a more closely set cloth reaches it sooner.

Mechanics and drape

The locking angle

The bias runs out at an angle that yarn diameter and thread spacing decide between them. It is the number behind whether a cloth will go round a curve, and it has nothing to do with how strong the fabric is.

A cloth laid over a sphere. Every thread segment is exactly one pitch and none has stretched. What has changed is the angle at each crossing, and the amount is decided by the surface — a developable one costs nothing and a curved one costs more the further the cloth goes.

Mechanics and drape

Shear locking in a composite preform

Laying a woven reinforcement over a mould is the bias mechanism doing useful work, and it stops dead at the angle where the threads jam. Where the cloth wrinkles is a geometric prediction with a radius attached.

A ratio that will not hold still. The exchange rate between the two directions for 4 cloths, against how far each has been extended along the warp. Every curve is above one half everywhere it is drawn, and every curve rises — so a single number for a cloth's ratio has to name the state it was read at, which a material's ratio does not.

Mechanics and drape

A cloth's Poisson ratio is not a material's

The ratio of a cloth's contraction to its extension has a name everywhere else in mechanics, and it breaks every rule the name comes with — above one half on all eight cloths measured, doubling across a four per cent span, and not reciprocal between the two directions.

The whole library · All essays