Textile Structure
how cloth is put together
Generator

The satin census, with and without a move number

The satin census, with and without a move number
The satin census, with and without a move number. Every arrangement of one warp mark per end and per pick with no two marks in adjacent ends in adjacent picks, enumerated for orders 4 to 10. The arrangements column counts every position of the repeat and the distinct column counts translation classes, which is what a weaver would call different weaves. Four ends has none of any kind — not merely no regular one — so the four-end sateen a weaver draws has two marks touching in it and is a twill. Six ends has exactly 1, whose translation orbit is 36 out of 36, which by the characterisation this census uses means it has no move number. What the table cannot show is mirroring: a satin and its mirror image are counted separately here and are the same picture turned over, though not the same cloth to thread.

Every arrangement of one warp mark per end and per pick with no two marks in adjacent ends in adjacent picks, enumerated for orders 4 to 10. The arrangements column counts every position of the repeat and the distinct column counts translation classes, which is what a weaver would call different weaves. Four ends has none of any kind — not merely no regular one — so the four-end sateen a weaver draws has two marks touching in it and is a twill. Six ends has exactly 1, whose translation orbit is 36 out of 36, which by the characterisation this census uses means it has no move number. What the table cannot show is mirroring: a satin and its mirror image are counted separately here and are the same picture turned over, though not the same cloth to thread.

6 essays call satin-census. The drawing above is what it returns with no arguments at all; every call below passes it something, because a placement that passes nothing draws whichever member of the family the generator happens to default to rather than the weave its essay argues about.

Where it is called

Changing this generator changes every one of these figures.

The 6-end satin. The 6-end satin on point paper, drawn over 2 repeats with its marks joined in reading order inside the first. The joining segments are not parallel and not equal, because there is no number of picks the mark advances by at every end. That is what irregular means, and it is not visible in the squares alone. At this order there is one distinct satin and none is regular. The longest float is 1 in the warp and 5 in the weft, and the cloth is one cloth. What the drawing cannot show is that this is the only one: that is a statement about 36 arrangements and is made by the enumeration. Weaves

The six-end satin that does exist

There is no six-end satin, and this collection proved it in its founding essays. The proof is about satins with a move number. Drop that word — keep one mark per end and no two marks touching — and six ends has exactly one satin, unique up to where the repeat is started, and four ends still has none at all.

 How much every four-by-four draft can shine. All 22,874 four-by-four drafts in which every end and every pick interlaces, at sheeting's construction and a tolerance of 2°, counted by specular area. The range runs from 0.02% to 0.93%, a factor of 60.0, and the distribution is not smooth — it clusters, because the quantity behind it is a count of whole crossings and takes only certain values. The dullest drafts in the catalogue are the plain weaves, which have no plateau at all and shine only from the crowns of their turns; the brightest carry the most float on the face, with the fewest turns interrupting it. Lustre over the catalogue is a length census, and nothing about the yarn enters it. Weaves

Lustre is a length times a width

The specular area of a cloth factors exactly: a length of crown line, which the draft supplies, times a width of section within the tolerance, which the yarn and the finish supply. Neither factor knows anything about the other, and over the four-by-four catalogue the first alone spans a factor of sixty.

 The lattice under 8/3 and 10/3. Satin marks drawn as points over two repeats, the 8-end satin on a move of 3, whose closest marks are √8 apart and next √10, so its marks line up 45° off the weft; and the 10-end satin on a move of 3, whose closest marks are √10 apart and next √10, two equal directions at right angles and so no single diagonal. For a regular satin the blue arrow is the shortest lattice vector and the red the next, and the faint lines run along the shortest through every mark — the diagonal the marks make. What the drawing cannot show is whether an eye finds that diagonal in woven cloth, where the marks are not points but short interruptions of a float, and where the yarn's own twist lies across them at an angle of its own. Weaves

Most satins still have a diagonal

A satin is chosen so that no diagonal forms, and its move is ranked by how far apart its interlacings sit. But the interlacings of a regular satin lie on a lattice, every lattice has a shortest step, and the marks line up along it. Only when two shortest steps tie is there no row to follow — and between five and forty ends the best move manages that at twelve of the thirty-five orders.

 Which satin orders are row-free, from 5 ends to 40. Every satin order from 5 to 40, marked where the best move's lattice has two shortest steps of equal length rather than one — which is the condition under which the interlacings do not line up into a row. The row-free orders are 5, 10, 13, 15, 17, 24, 25, 26, 29, 34, 35, 37: twelve of the 35 orders that admit a regular satin at all. An n-end satin floats over n − 1, so a float limit is a ceiling on the order, and the ceilings for limits of 8, 12, 16 are drawn. What the strip cannot show is the spread, by which the orders are ranked and which decides which move is best within each. Weaves

A float limit leaves one row-free satin

A satin is chosen so that no diagonal forms, and an earlier essay found that most of them fail: the interlacings lie on a lattice, every lattice has a shortest step, and the marks line up along it unless two steps tie — which happens at twelve of the thirty-five orders from five to forty. The other constraint was named and not applied. An n-end satin floats over n − 1, so a yarn that will not carry a float longer than eight admits four orders in all, and exactly one of them is row-free: the five-end satin, which is the one everybody already weaves.

 What an irregular satin buys, order by order. For each order, the best regular satin's and the best irregular satin's scatter at the order's own best spread — the largest share of the closest pairs that point in one direction, where one is a line and less is a scatter. 5 ends: regular 0.50, irregular none at the best spread; 6 ends: regular none exists, irregular 0.25; 7 ends: regular 1.00, irregular 0.33; 8 ends: regular 1.00, irregular none at the best spread; 9 ends: regular 1.00, irregular 0.25; 10 ends: regular 0.50, irregular none at the best spread; 11 ends: regular 1.00, irregular none at the best spread. Irregularity buys something at 6, 7, 9 and nothing at the rest, and where it buys it scatters over four directions with no more than a third in any one. What the bars cannot show is whether a reader sees the difference, which is a question about a visual system. Weaves

An irregular satin scatters where a regular one lines up

A regular satin's marks lie on a lattice, so its closest pairs all run along one vector and make a row. An irregular satin has no lattice at all, so its closest pairs may point several ways at once — and at seven and nine ends, where every regular satin at the best spread has a row, an irregular one reaches the same spread with its closest pairs scattered over four directions and no more than a third in any one. At eight and eleven ends there is no such satin: the best spread is reached by regular satins alone, and irregularity has nothing to offer.

 8/3 at 1.00 and 8/3 at 1.29, drawn in cloth. Satin marks drawn over two repeats at the spacings of a cloth, with the pick direction stretched by the sett ratio — ends per centimetre over picks per centimetre — and every closest pair of marks joined. 8-end satin, move 3 at a sett ratio of 1.000: closest pairs point one way: a row; 8-end satin, move 3 at a sett ratio of 1.291: closest pairs point 2 ways: no row. What the drawing cannot show is the float each mark interrupts, which is what a reader of the cloth actually sees. Weaves

A satin's row belongs to its sett

Point paper draws an end and a pick as equal squares, and every result about which satins have a row was taken there. A cloth is not square: it is set at so many ends and so many picks a centimetre, and in cloth the ties that made twelve satin orders row-free are ties between steps of different shape, which break at the first per cent of unequal sett. The reverse happens too. An eight-end satin, rowed on paper, has no row at exactly 1.291 ends per pick; an eleven-end at 1.265 and 1.528. And the only scatter that survives a range of setts is an irregular satin whose closest steps are mirror images — which nine ends has from the first per cent and ten only by 1.3.

The whole library · All essays