Textile Structure
how cloth is put together
Generator

2/2 twill: written at 4×4, repeating on 4

2/2 twill: written at 4×4, repeating on 4
2/2 twill: written at 4×4, repeating on 4. On the left the draft as written, with the smallest rectangle that tiles it outlined. On the right the same draft with every translation that leaves it unchanged marked from the top left corner: there are 4 of them, so a fundamental domain holds 4 intersections rather than the 16 the rectangle claims and the 16 the point paper carries. Nothing in the drawing on the left says so.

On the left the draft as written, with the smallest rectangle that tiles it outlined. On the right the same draft with every translation that leaves it unchanged marked from the top left corner: there are 4 of them, so a fundamental domain holds 4 intersections rather than the 16 the rectangle claims and the 16 the point paper carries. Nothing in the drawing on the left says so.

2 essays call repeat-lattice. The drawing above is what it returns with no arguments at all; every call below passes it something, because a placement that passes nothing draws whichever member of the family the generator happens to default to rather than the weave its essay argues about.

Where it is called

Changing this generator changes every one of these figures.

2/2 twill: written at 4×4, repeating on 4. On the left the draft as written, with the smallest rectangle that tiles it outlined. On the right the same draft with every translation that leaves it unchanged marked from the top left corner: there are 4 of them, so a fundamental domain holds 4 intersections rather than the 16 the rectangle claims and the 16 the point paper carries. Nothing in the drawing on the left says so. What cloth is

What a repeat repeats

Point paper is ruled in squares, and the rectangle a draft is written on is a decision by whoever drew it. The unit a cloth actually has is smaller — two intersections for a plain weave, four for a 2/2 twill — and it is not a rectangle at all.

 Plain weave, doubled. Plain weave, then the same weave with its picks grouped in 2, its ends grouped in 2, and both — which are a warp rib, a weft rib and a hopsack — and a 2/2 twill beside them for comparison. The rules under the drafts bracket the threads that lift together on every pick and so lie touching. Each doubling multiplies the cloth's own unit by 2: 2, then 4, then 8 intersections. The hopsack and the twill interlace equally often and are drawn from different rules. The setts under each draft are the densest that weave may be set at with a 0.25 mm yarn, and a rib's two are 0.750 apart where every other weave here is square. Weaves

A cord is a stripe with no colour in it

Warp rib, weft rib and hopsack are plain weave with its threads doubled, in the warp, the weft, or both. Six of the nine measures this site takes off a matrix cannot tell a 2/2 hopsack from a 2/2 twill, and the three that can are not the ones a weaver quotes.

The whole library · All essays