Textile Structure
how cloth is put together
Generator

The two routes a poplin has to a strain

The two routes a poplin has to a strain
The two routes a poplin has to a strain. A poplin drawn in section at three places: as woven, at the end of what its crimp can supply, and past that. Between the first two the warp's crimp falls from 8.97% to 4.85% and the weft takes on what it gave up, and the thread length is 0.4953 mm in both — nothing has stretched, and the cloth is 3.93% longer. Between the second and the third the geometry cannot move because the weft's straight run has vanished, so the cloth's extra 2.0% is the thread's extra 2.0%. What the drawing cannot show is which of the two a piece of cloth has had: the first two states look different and the last two look the same, and it is the last two that differ in whether the cloth comes back.

A poplin drawn in section at three places: as woven, at the end of what its crimp can supply, and past that. Between the first two the warp's crimp falls from 8.97% to 4.85% and the weft takes on what it gave up, and the thread length is 0.4953 mm in both — nothing has stretched, and the cloth is 3.93% longer. Between the second and the third the geometry cannot move because the weft's straight run has vanished, so the cloth's extra 2.0% is the thread's extra 2.0%. What the drawing cannot show is which of the two a piece of cloth has had: the first two states look different and the last two look the same, and it is the last two that differ in whether the cloth comes back.

4 essays call memory-route. The drawing above is what it returns with no arguments at all; every call below passes it something, because a placement that passes nothing draws whichever member of the family the generator happens to default to rather than the weave its essay argues about.

Where it is called

Changing this generator changes every one of these figures.

The two routes a poplin has to a strain. A poplin drawn in section at three places: as woven, at the end of what its crimp can supply, and past that. Between the first two the warp's crimp falls from 8.97% to 4.85% and the weft takes on what it gave up, and the thread length is 0.4953 mm in both — nothing has stretched, and the cloth is 3.93% longer. Between the second and the third the geometry cannot move because the weft's straight run has vanished, so the cloth's extra 2.0% is the thread's extra 2.0%. What the drawing cannot show is which of the two a piece of cloth has had: the first two states look different and the last two look the same, and it is the last two that differ in whether the cloth comes back. What cloth is

A cloth gives back less than it took

Everything this collection computes about a deforming fabric is reversible, and no fabric is. The repair is not a new material property: a woven cloth has two routes to a strain, one of them costs its threads nothing and comes back in full, and where the first route runs out is a number about the sett with no fibre in it at all.

 The poplin's two budgets as it is held stretched. What is left of a poplin's interchange in each direction as it is held at more and more warp strain. The warp's budget falls to nothing at 3.93%, which is the point of the curve; the weft's rises, because the crimp the warp gives up is crimp the weft takes on. There is one locus and one position on it, so the two are not two quantities that happen to be related — they are the two distances from one point to the two ends of one curve. The consequence is that a pre-tensioned cloth has almost no warp recovery left and more weft recovery than it started with. What the plot cannot show is that the exchange rate between them is not constant: the curve is not a straight line, and its slope is the Poisson ratio this site computes elsewhere. Mechanics and drape

A cloth has one budget for two directions

A woven cloth looks as though it carries two independent reserves of free extension, one along the warp and one across the weft. It carries one. There is a single curve of states and a single position on it, so every hundredth spent one way is refunded the other — which means a pre-tensioned cloth has not used its recovery up, it has moved it.

 How far each cloth's sett moves between the loom and the finished state. A cloth on the loom is held: the warp is under beam tension and the picks are driven up at whatever density the take-up says. Let it go and it relaxes to the least-energy state of its own locus, which is a state at a different sett. The bars are how far each sett moves, and they always move in opposite directions because there is one locus: warp ends per centimetre fall as the cloth widens and picks per centimetre rise as it shortens. Seven of the eight move a little over one per cent; the poplin, whose two counts and two setts are the only unbalanced pair in the table, moves six and ten. What the bars cannot show is what a designer does with them, which is that the two numbers a specification quotes are not two free numbers — the finished construction is a point on a one-dimensional curve. Setting and geometry

The construction a loom must be set to

A specification quotes ends and picks per centimetre in the finished cloth, and a loom is set to neither of them. The cloth relaxes to the least-energy state of its own locus, which is a state at a different sett — and because the locus is one curve, the two numbers a specification quotes are not two free numbers.

 What a tensioned sheeting has left of its load. A sheeting pulled to a strain, clamped at that length and left. Its length does not change, and its load does: crossings rearrange locally until the load has fallen to what friction alone can hold, which is 0.0756 N per end and is the same number whatever the cloth was pulled to. So the fraction retained is that floor over the load applied, and it falls — a cloth tensioned to 4.94 per cent keeps 29 per cent of what it was given. Below the resting band's own edge nothing is lost at all, because the cloth was never outside what friction could hold. What the plot cannot show is time: nothing here says how long the rearrangement takes, only where it stops. Mechanics and drape

A tensioned cloth loses its load

Clamp a fabric at a fixed length and its tension falls overnight. Nothing crept and nothing flowed: the crossings rearranged locally until the load had dropped to what friction alone can hold, and that level is the same number whatever the cloth was pulled to — so the harder it was tensioned, the smaller the share it keeps.

The whole library · All essays