Textile Structure
how cloth is put together
Generator

Four constructions, and the two numbers that tell them apart

Four constructions, and the two numbers that tell them apart
Four constructions, and the two numbers that tell them apart. The same two-layer draft finished four ways. The bar is the number of free selvedges the finished cloth has; the note beside it carries the piece count, the shuttles the loom needs and what the infinite repeat says. The repeat says two for three of the four, which is right every time and settles nothing.

The same two-layer draft finished four ways. The bar is the number of free selvedges the finished cloth has; the note beside it carries the piece count, the shuttles the loom needs and what the infinite repeat says. The repeat says two for three of the four, which is right every time and settles nothing.

3 essays call joining. The drawing above is what it returns with no arguments at all; every call below passes it something, because a placement that passes nothing draws whichever member of the family the generator happens to default to rather than the weave its essay argues about.

Where it is called

Changing this generator changes every one of these figures.

3 cloths on 6 ends. A repeat of 6 ends and 6 picks holding 3 complete cloths, each with 2 ends and 2 picks of its own. The bars beside the strands say which cloth each belongs to; the ceiling at this size is 3, and the longest float is 5 because the face warp passes over every pick below it. What cloth is

How many layers a draft can have

Of the 22,874 four-by-four drafts this site sweeps, 22,730 are one cloth and 144 are two. None is three, and none can be — a repeat of n ends holds at most n halved cloths, because every cloth needs two ends and two picks of its own before it interlaces at all.

 A tube. A two-layer fabric 6 ends wide in each layer, with the weft's path drawn across the section below the draft. 1 piece of cloth, 0 free selvedges, 1 shuttle, and a developed width of 12 ends however the edges are joined. The connectivity of the infinite repeat is 2 for this draft and cannot tell this construction from the others. Compound and figured cloths

A tube and two cloths are the same draft

Two separate fabrics, a cloth twice the width of the loom and a seamless tube are the same draft to the last square. The check this site is built on reports two layers for all three and is right every time — because the thing that separates them is four free selvedges, or two, or none, and a repeat has no selvedges in it.

 Where a stitch can hide on a 5-end satin face. The face weave on point paper, with a mark on every gap between two ends at which a stitch would be covered. 15 of the 25 positions in the repeat pass the cover rule, which is 60 per cent of them, and 5 of those can be used at once without two stitches sharing a pick or a gap. Compound and figured cloths

Where a stitch can hide

One reversed intersection turns two cloths into one, and half the intersections in the repeat would do it. Almost none of them may be used — a plain-faced double cloth has nowhere at all to put a stitch, a five-end satin has fifteen places or none depending on which rule is asked, and two satins of the same order differ by a factor of two.

The whole library · All essays