Heddles per shaft: stripe
The threading of a narrow satin stripe on a broad plain ground, over a warp of 1,200 ends. Each bar is one shaft and its length is the heddles on it. The draft needs 10 shafts however they are loaded; the heaviest carries 500 and the lightest 25, a factor of 20.0. Spending 20 shafts instead brings the heaviest down to 100.
3 essays call
heddle-load. The drawing above is what it returns with no arguments at all; every
call below passes it something, because a placement that passes nothing draws whichever
member of the family the generator happens to default to rather than the weave its essay
argues about.
Where it is called
Changing this generator changes every one of these figures.
Pattern and colour
A stripe is a partition of the warp
A striped cloth is not a weave with decoration on it — it is one matrix in which different bands of ends obey different rules. The shaft count is a set union rather than a sum, and of forty-five pairs of standard weaves only three share a single column.
Compound and figured cloths
Where the heddles go
A draft says how many shafts it needs and says nothing about how the ends divide between them. On a satin stripe over a plain ground the two ground shafts carry twenty times what the stripe shafts do — and the only cure is to spend shafts, which turns the threading into an allocation problem with an exact answer.
What cloth is
A lifting plan says nothing without a threading
The second of the notations for something larger than a weave is a pair, not a notation: a threading and a lifting plan, and neither alone expresses anything. The pair's image is exactly the drafts with no more distinct columns than there are shafts — 98 at two shafts, 5,282 at three, all 22,874 at four — and it is not nested with the profile draft's in either direction. The profile reaches 192 drafts that need all four shafts, and misses 64 of the 98 a two-shaft loom weaves.