Textile Structure
how cloth is put together
Generator

A cloth laid over a sphere

A cloth laid over a sphere
A cloth laid over a sphere. Every thread segment is exactly one pitch and none has stretched. What has changed is the angle at each crossing, and the amount is decided by the surface — a developable one costs nothing and a curved one costs more the further the cloth goes.

Every thread segment is exactly one pitch and none has stretched. What has changed is the angle at each crossing, and the amount is decided by the surface — a developable one costs nothing and a curved one costs more the further the cloth goes.

4 essays call drape. The drawing above is what it returns with no arguments at all; every call below passes it something, because a placement that passes nothing draws whichever member of the family the generator happens to default to rather than the weave its essay argues about.

Where it is called

Changing this generator changes every one of these figures.

A cloth laid over a sphere. Every thread segment is exactly one pitch and none has stretched. What has changed is the angle at each crossing, and the amount is decided by the surface — a developable one costs nothing and a curved one costs more the further the cloth goes. Mechanics and drape

Why clothes need darts

A flat cloth goes round a cylinder for nothing and cannot go round a sphere at all without shearing. The amount of shear is decided by the curvature, and when it exceeds what the threads allow, something has to be cut out.

 A cloth laid over a sphere. Every thread segment is exactly one pitch and none has stretched. What has changed is the angle at each crossing, and the amount is decided by the surface — a developable one costs nothing and a curved one costs more the further the cloth goes. Mechanics and drape

Shear locking in a composite preform

Laying a woven reinforcement over a mould is the bias mechanism doing useful work, and it stops dead at the angle where the threads jam. Where the cloth wrinkles is a geometric prediction with a radius attached.

 How much of the curvature a cloth can take without being cut. The dart angle a spherical cap still demands after the fabric's own shear has absorbed what it can, against how closely the cloth is set. The total the cap demands is fixed by Gauss–Bonnet and is the same for all of them; what changes is how much of it the trellis can supply before its threads jam. An open cloth drapes a hemisphere with no dart at all; a closely set one has to be cut from the start. Cloth doing a job

A hemisphere costs one full turn

The total angle a pattern must remove to cover a hemisphere is exactly 360 degrees, and it is the same for a hat and for a stadium dome. What changes with the fabric is how much of that the cloth can supply by shearing instead of by being cut — and that is a property of the sett, computed from the angle at which its threads jam.

 The shear a dome demands, against how far round it the cloth reaches. A flat sheet of inextensible threads takes a double curvature only by shearing, and the shear it needs depends on how far round the dome it has to reach rather than on how big the dome is — a knee, a shoulder and a beach ball demand exactly the same at the same fraction of their own radius. The horizontal line is the locking angle for a sheeting, where the threads are touching side by side and the mechanism has nowhere left to go. Reaching one radius round takes the cloth to 85% of that, and reaching 1.2 radii passes it. What the plot cannot show is the frictional part: a shear well inside the locking angle is still a shear at crossings friction is holding, so a knee that is domed a thousand times keeps a little of each one. Cloth doing a job

A knee is a dome imposed a thousand times

A flat sheet of inextensible threads takes a double curvature only by shearing, and how much shear it needs depends on how far round the dome it has to reach — not on how big the dome is. So a knee and a beach ball demand the same, and a trouser knee covered to its own equator is at 85 per cent of the angle at which the threads touch side by side.

The whole library · All essays